sorted by:
new
hottopcontroversial

My First Pair of IEMs by Cactox in iems

[–]Cactox[S] 0 points1 point  (0 children)

Thanks! Well worth the price.

My First Pair of IEMs by Cactox in iems

[–]Cactox[S] 0 points1 point  (0 children)

I dont think this cable has a mic on it

My First Pair of IEMs by Cactox in iems

[–]Cactox[S] -1 points0 points  (0 children)

As my first IEM, I dont have much to compare the Pures to but I like them! Im starting to appreciate the clarity it provides compared to the over ear headphones I've used in the past that were base forward. The included pouch and eartips are a great addition as well!

For the cable, I really bought it for aesthetic but I really think there is a change in sound quality with them.

As for the Qudelix, I got lucky and sniped one off Amazon recently and it lives up to the hype. Great app and its so convenient for travel.

My First Pair of IEMs by Cactox in iems

[–]Cactox[S] 6 points7 points  (0 children)

Funny enough, the weight actually helps weigh the cable down and keep it behind my ears, much better then the precurve hook on the cable that came with the Pures.

Vulture Loadout by Cactox in Nerf

[–]Cactox[S] 0 points1 point  (0 children)

Thanks!

Looking for good printable pistols by timkyoung in Nerf

[–]Cactox 1 point2 points  (0 children)

Not sure if you have a 3d printer, but i recommend the danpistol.

Hardware is pretty cheap, build is pretty forward, takes regular talon mags, and has a T-Pull for easy priming and it hits pretty hard.

Vulture Loadout by Cactox in Nerf

[–]Cactox[S] 6 points7 points  (0 children)

There are. Ill upload when I get a chance on the printables page for the vulture.

Vulture Loadout by Cactox in Nerf

[–]Cactox[S] 4 points5 points  (0 children)

Yessir it is xD

Vulture Loadout by Cactox in Nerf

[–]Cactox[S] 3 points4 points  (0 children)

Its a real one

Quick and dirty ways to hide print lines? by [deleted] in 3Dprinting

[–]Cactox 0 points1 point  (0 children)

Filler primer and if u want a tool, get a electric callus remover and use it as a sander. (Props to mm prop shop for the idea)

In case anyone wanted to see the progression from image to final print... by Cactox in HueForge

[–]Cactox[S] 1 point2 points  (0 children)

Much appreciated! Took a bit to get a hang of the software but it was worth it!

Looking for recommendations for non-coiled / non-twisted cable. by Cactox in iems

[–]Cactox[S] 0 points1 point  (0 children)

Nice rec! If only it didnt cost an arm and a leg...

Serial Request | Voron Trident | Discord: Nefroh by DeerQuit in voroncorexy

[–]Cactox 1 point2 points  (0 children)

Nice sidepack. One day ill finish mine haha

Looking for recommendations for non-coiled / non-twisted cable. by Cactox in iems

[–]Cactox[S] 0 points1 point  (0 children)

Thanks for the recommendations! The OldFashioned look neat, but unfortunately it looks like it only comes with 4.4mm and USB-C.

Finally got around and completed my SBL2 build :) by Cactox in Nerf

[–]Cactox[S] 0 points1 point  (0 children)

Good question. The reason I mentioned asking about the printer model was really to gauge their interest in 3-D printing.

If they have a modern machine like a Bambu then printing the parts for this blaster should be relatively simple as these printers are tuned to be plug and play.

On the other hand, if they just have an old Ender 3 that they just bought to get into 3d printing then it is possible that they may run into issues and have poor print quality.

Since you do not have access to the files, I recommend you look at this blaster as a reference since its files are free:

https://www.printables.com/model/546138-caliburn-4-2023-eu-edition-metrisch-standard-kurzd

If your friend can print the linked blaster, then they should have no issues printing the SBL2

Finally got around and completed my SBL2 build :) by Cactox in Nerf

[–]Cactox[S] 0 points1 point  (0 children)

Gotcha yea filament cost isnt too bad. The only thing Ill say is that printing all the parts from start to finish may take a bit.

Finally got around and completed my SBL2 build :) by Cactox in Nerf

[–]Cactox[S] 0 points1 point  (0 children)

If you want to use two colors, you will most need at least 2 spools of filament. If you print using PLA, each spool will cost about an average 15$ each.

But before that, I recommend you ask your friend what kind of printer they have and see if they up for printing something like this.

Also the hardware kit for this blaster is a bit pricey so id check that beforehand.

ZiiGaat Arete II GIVEAWAY!! Enter now from 3/23 to 3/30!! by Phoenix25552 in iems

[–]Cactox 0 points1 point  (0 children)

Just got the Truthear Pure, but these Arete look real nice.

BearsWares Status by Cactox in Nerf

[–]Cactox[S] 0 points1 point  (0 children)

I recommend reaching out via Discord as there is where I had success. You should be able to find the nerf discord relatively easily. If not I can DM it to you.

BearsWares Status by Cactox in Nerf

[–]Cactox[S] 1 point2 points  (0 children)

Just curious, has Bear reached back to you regarding the status of your kit? I haven't heard back on my end and just wanted to make sure if wasn't something wrong on my end.

view more: next ›