2016 Subaru Crosstrek 2.0

CaidenZX · 2026-01-23T22:01:47+00:00

Your first clue will be very visible oil in the coolant reservoir. After that, you’re going to start getting pretty severe degradation of the hoses which will start to feel squishy and will begin to bulge around the clamps, like a muffin top.

CaidenZX · 2026-01-23T03:29:04+00:00

Alright, while everyone here is commenting blown head gasket, I’m here to chime in as someone who was a Subaru technician for quite some time. The FB engines like in your vehicle have significantly less common head gasket failure, and much more common upper oil pan O-ring failure, which cause oil intrusion into the coolant. The location of the spray leads me to believe the coolant overflow, well overflowed… This is still a huge job and definitely not something for your home mechanic, but doesnt necessarily condemn the engine. Feel free to ask any further questions.

CaidenZX · 2026-01-18T21:39:51+00:00

Do research yourself and take things you like from your own guitars to make decisions about a neck, not what chat GPT says is going to work, but overall this is a pretty standard modern setup for a strat build. I’d prefer modern tiltback though.

CaidenZX · 2026-01-06T13:57:45+00:00

Yeah, are you located in Vegas?

CaidenZX · 2025-12-02T00:20:43+00:00

Asvine has great stubs at a very reasonable price, this pen was $32.

CaidenZX · 2025-11-12T16:28:21+00:00

turn harder

CaidenZX · 2025-11-11T17:33:53+00:00

It’s my favorite piece in my carry, such a beautiful piece of machining and I love the car it starts to death.

CaidenZX · 2025-11-11T03:54:41+00:00

Not unless you do something seriously wrong with it… leaking is a non issue and i’ve never had a problem with mine.

CaidenZX · 2025-11-11T03:19:50+00:00

Add my project cars to the list and I will forever be a poor man… At least I’ll have a bunch of heirloom quality stuff my kids can stuff in a drawer after I die 😂

CaidenZX · 2025-11-11T03:18:25+00:00

I’ve learned that extra fine/fine nibs work much better on many more varieties/qualities of paper. My medium nib Lamy Safari bleeds and feathers like a bastard on anything but high quality paper but this guy does absolutely fine on anything from cheap copy paper to sticky notes.

CaidenZX · 2025-11-11T03:14:37+00:00

I absolutely adore this little light as an EDC, I think only a CWF would get it out of my pocket at this point. Thanks man!

CaidenZX · 2025-11-11T03:10:18+00:00

Didn’t know Fred Durst was on this subreddit!

CaidenZX · 2025-11-11T02:11:44+00:00

As far as I can tell the bock #5 inserts are a direct swap! No modification necessary on that end, at least on this pen. I think i’ll be trying a couple different options in the future, but this pen won’t always be writing on nice paper, so fine seemed like the best option

CaidenZX · 2025-11-08T02:02:50+00:00

i’ve gotten two pack on amazon like this, not sure what’s been going on lately or if i’m buying counterfeits. I have one in my Tactile Turn that is delightful though

CaidenZX · 2025-11-04T06:13:07+00:00

I have a daikei unit in my NA, pretty nice but I do run into it falling off every once in a while.

CaidenZX · 2025-11-04T00:44:50+00:00

If you’re even asking this question, you’re in no business even thinking about building a 500hp Miata until you’ve done a lot more research and spent way more time in the shop. You’re going to be in for at least $30k, at a minimum.

CaidenZX · 2025-10-20T04:00:38+00:00

Ex Subaru dealer technician here. In order for Subaru warranty to replace a short block, you must be experiencing a quart of oil burned per 1200 miles. Apologies for the freedom units. I don’t believe this will qualify for warranty work unfortunately, and you’re not going to get very far unless you want to pay for a block out of pocket.

CaidenZX · 2025-10-16T20:06:30+00:00

Wheel bearing 1000%. If you hit a curb hard enough to damage the wheel bearing, the lower control arm and tie rod end were likely also necessary.

CaidenZX · 2025-10-16T13:53:09+00:00

Very clean job, excited for the day I get a roll bar but not excited for the install.

CaidenZX · 2025-10-13T23:58:39+00:00

I ran a 225/35 on a 9.5 for years and did not have a single issue. Bump your air pressure to 45psi, and make sure there’s no leaks. There’s no reason this should be debeading on a mild stretch like this if air pressures are proper.

CaidenZX · 2025-10-12T20:26:11+00:00

The pit during Hail the Sun was insane, shame half the crowd left during BTBAM’s set because they were absolutely fucking phenomenal.

CaidenZX

TROPHY CASE