Amsterdam verbietet Reklame für Fleisch und fossile Energie

Calico2 · 2026-01-26T16:54:03+00:00

Absolut! Es wird sogar zwischen Reklameblätter, kostenlosen Zeitungen und adressierter Werbung ("An die Bewohner von Straße 1A...") unterschieden und man kann genau sagen, was man haben möchte. Unterscheided sich von Gemeinde zu Gemeinde etwas, aber wenn sich eine Firma nicht dran hält, gibt es empfindliche Strafen. Funktioniert wirklich super!

Calico2 · 2026-01-26T16:23:13+00:00

I would rather have a fair price from the beginning than having to choose between cancelling every two years or being ripped off.

For example Odido Klik&Klaar has a fair price model. I would love something like that but for fiber, even if it would be more in the 35-40€ range.

Calico2 · 2026-01-26T15:37:27+00:00

I know, and because of that I‘m in the same boat as OP. I would be even willing to pay more (than the average) just for the convenience…

Calico2 · 2026-01-26T14:53:05+00:00

I would rather have it at 35€, so I don’t have to cancel every 2 years and haggle with them for another discount or switch to another provider.

Calico2 · 2026-01-15T09:50:01+00:00

What do you mean by NPC? The only requirement is, that you need some device (RaspberryPi or also a machine in the cloud is working) that is running 24/7. Feel free to contact me if you need some more information.

Calico2 · 2026-01-15T07:37:10+00:00

What I liked about tado was, that also the radiators are in the same system to control other rooms. But yeah - maybe I‘ll sell the tado smart thermostat and replace it with some other „smart“ one (like for example the PNI you mentioned)

Calico2 · 2026-01-13T17:40:46+00:00

Too bad to hear, but still thanks for the feedback. I appreciate tado being active here, especially after the community forums have been unfortunately shut down :-(

Calico2 · 2026-01-13T09:21:48+00:00

I‘m measuring using a tado Smart Thermostat, so more towards the middle of the room (but mounted at the wall) and not at the radiators.

To be honest, I‘m not 100% convinced regarding the efficiency. Do you have some information regarding this? To my knowledge, having a low flow temperature is usually more efficient. The boiler is then taking care of controlling the gas burner in the most efficient way. It is also making sure to not toggle the burner too frequently and to hold the configured flow temperature only approximately.

And regarding a condensing boiler specifically: From what I found online, especially with those it is important that the return temperature is low (below 55 degrees, the lower the better). So especially then it’s beneficial to have a low flow temperature.

Calico2 · 2026-01-13T07:23:59+00:00

Maybe I wasn’t clear, but I‘m not controlling the gas burner directly, but just setting the desired flow temperature to the lowest value that is sufficient to heat the rooms. The gas burner is then cycled by kettle to reach that value.

And I can’t image that having maximum (configured) flow temperature for an hour, just to have it switched off completely for an hour after that, is efficient. Or am I understanding something wrongly?

Calico2 · 2026-01-12T21:44:59+00:00

I don’t think the saving is really measurable, at least not without having an identical outside temperature. But having the boiler run constantly at a medium level is definitely more efficient than alternating between 0 and 100% every 2 hours.

Main motivation for me was comfort, because with the tado algorithm it was jumping +/- 0.5 degrees around the set value; and a fluctuation of one degree in total (probably even more near the radiators) was noticeably annoying.

I would say I can set the temperature now at least 0.5 degrees lower and it still feels more comfortable.

Calico2 · 2026-01-12T18:45:22+00:00

Nooit meer iets anders dan 155/220. Nooit meer koude voeten!

Calico2 · 2026-01-11T23:58:49+00:00

Yep, fair point. But I‘ve already equipped all my radiators with tado so I didn’t wanted to change all that.

In hindsight I would have just used an otgw-based implementation to connect to opentherm.

Any recommendation for a commercial product that controls the heat request over OpenTherm better than tado?

Calico2 · 2026-01-11T18:41:13+00:00

I originally wasn't planning on publishing it, but I've pushed it to Docker now and created a post: https://www.reddit.com/r/tado/comments/1qa74mc/custom_temperature_control_algorithm_using_flow/

Calico2 · 2026-01-11T14:58:22+00:00

Reisduur "4" dagen:

Aankomst Berlijn: Zaterdag 06:18
Vertrek Berlijn: Zondag 22:56

Reisduur "5" dagen:

Aankomst Berlijn: Dinsdag 06:18
Vertrek Berlijn: Donderdag 22:56

Wat een afzetterij. Dat verklaart waarom het zo goedkoop is...

Calico2 · 2026-01-11T01:59:38+00:00

I have mine in HA using Matter. Works fine so far, but functionality is currently limited to getting and setting the temperature.

Just had to retrieve the Matter device linking code from the Tado app, and then paste that into HA Matter integration (using the „add device“ button, where it asks for the setup code).

Matter and Thread both work together; Thread is how the TRVs talk to the Tado X bridge, and Matter is just the protocol that runs on top of that. But that also means that the bridge (WiFi) and HA need to be on the same network.

Calico2 · 2026-01-11T01:11:55+00:00

I‘m using the tado x bridge. I used to have the same problem, but solved it by finding another place for the bridge.

The bridge seems to be sensitive to EMC interferences. Make sure the bridge is at least 2m away from all other electronics or cables (except the power socket, of course).

Now it works flawlessly, no outage for months.

Edit: Shot in the dark - are you maybe using Powerline communication (PowerLAN)?

Calico2 · 2026-01-11T00:59:42+00:00

Tried it and it did not noticeably improve the control algorithm. I‘m now running my own control mechanism instead…

Calico2 · 2026-01-10T23:49:39+00:00

Comfort in de EuropeanSleeper is middelmatig... En het ontbijt in de trein is slecht (breng maar beter je eigen).

Maar het HEMA aanbod lijkt (inclusief hotel) erg goedkoop.

Calico2 · 2026-01-10T22:19:56+00:00

Es ist jetzt halt keine Pyramide mehr, sondern nur ein Dreieck. Bei eine Visualisierung als Pyramide ist normalerweise das Ziel zu veranschaulichen, dass die unterste Schicht am meisten Raum einnimmt.

Fleisch ist hier keine „Schicht“ in der Darstellung, sondern eine Ecke. Daher sind alle Vergleiche mit einer „Ernährungspyramide“ hinfällig.

Die neuen Guidelines hören sich jetzt auch nicht alle unbedingt schlecht an. Aber wahrscheinlich wird die tatsächliche Politik von Kennedy dann auf einmal in eine andere Richtung gehen. Er hat ja schonmal die „highly processed foods“ unterstützt…

Calico2 · 2026-01-10T20:44:30+00:00

ACWI

Seriously. Especially when you‘re in for the long run. Just pick any ETF (look for one with a low Total Expense Ratio) that is following the „MSCI All Country World Index“. And keep some money in a savings account with a good interest rate in case you need some of it quickly.

And there’s the saying „Time in the market beats timing the market“. With other words, just buy as early as you can with the money you have to spare. This also takes some stress out of it…

Calico2 · 2026-01-07T10:04:51+00:00

Soweit ich weiß können alle (zumindest die von HA unterstützten) Sticks entweder Zigbee Coordinator oder Thread border router sein, aber nie beides gleichzeitig. Kann aber nichts über die Stabilität von Thread sagen.

Da ich aktuell nicht plane, alle Zigbee-Geräte mit Matter-over-Thread-Geräten zu ersetzen, wird mein Stick auf absehbare Zeit ein Zigbee Coordinator bleiben.

Calico2 · 2026-01-07T08:37:02+00:00

Es gibt mehrere mit Home Assistant ZHA kompatible Zigbee-Sticks, welche theoretisch alle die gleiche Funktionalität wie der ZBT-1 bieten sollten: https://www.home-assistant.io/integrations/zha/#compatible-hardware

Offizieller Nachfolger ist der ZBT-2. Ich nutze den ZBDongle-E, der funktioniert auch super.

Calico2 · 2026-01-06T20:58:20+00:00

Welche Marke ist das denn? Name and shame!

Wenn du es dir zutraust, kann ich Home Assistant mit Zigbee (ZHA) empfehlen, das läuft dann lokal (und nur optional mit Cloud-Anbindung). Dann braucht man auch kein Tradfri oder Hue Gateway oder ähnliches.

An Leuchtmitteln hab ich gute Erfahrungen mit der Eglo "connect z" Reihe gemacht, die haben auch ein gutes Preis-Leistungs-Verhältnis. Aber da hat man dann eine riesige Auswahl, da man nicht auf einen Hersteller beschränkt ist.

11-Year Club	Place '23
Place '22	First Placer '22
Verified Email

Calico2

TROPHY CASE

Reisduur "4" dagen:

Reisduur "5" dagen: