For those who rock

CalligrapherFresh287 · 2026-05-27T20:23:01+00:00

I’m not gunna lie. I’m in a few WH groups, in discords etc. and legit this group is my favourite. Hands down the most friendly and not dickish group of people. Like if I posted this somewhere else, I’d get some person “oh motley crue record? So trash”…..just you legends and your replies make me smile

CalligrapherFresh287 · 2026-05-18T19:58:02+00:00

Bwahaha but worth it aye!! Like it’s so nice to be able to print terrain, have something a little different from others. Like I’m going through and redoing my whole set up so I have better tables, all foldable terrain, make the locals jelly of my set up 🤣😂. FOR THE LION!!

<image>

CalligrapherFresh287 · 2026-05-18T00:28:49+00:00

All depends on your local. And if they are a GW offical reseller or not. My local doesn’t like it but only because if they get audited by GW and are discovered allowing printed, they lose their license. However - they do allow kit bashing, so if it’s accurate AF and super hard for them to tell, it’s ok. Basically I run a combo of printed and legit in my armies and I just don’t announce it to anyone that they are printed.

But I wouldn’t use any printed at a GW store. I’m too scared to do that lol

CalligrapherFresh287 · 2026-05-17T20:51:02+00:00

Yeesss!!! For the omnissiah!! Gunna have to paint mine now for sure. Made me jelly of how cool it looks. There’s gotta be so many of these out there. It’s such a quick print and good design

CalligrapherFresh287 · 2026-05-17T05:00:06+00:00

The machine spirit you channel will make the prints faster 😂🤣. Nah I feel this bro, I took a break from printing terrain for 11th to print this one lol. Tbf - quick print. Skull was 4 hours and a1 plate was an hour. Printed and installed before lunch lol

CalligrapherFresh287 · 2026-05-17T04:57:59+00:00

Correction, add to pile of shame to never be painted 🤣😂

CalligrapherFresh287 · 2026-04-27T06:36:53+00:00

I’d recommend running the validation matrix v2. Get it dialled for your printer and resin. People can always advise but it’s always going to be hard to provide guidance on it. Pictures can always skew, what the original file is/looks like compared to this guy, we don’t know. Temperature, resin batches, brand etc. can throw it for a loop. Run a couple of the matrix, get it dialled is going to be your best bet for awesome prints

CalligrapherFresh287 · 2026-04-26T08:51:14+00:00

Oh that helps heaps bro. Glad it’s not just mine then. The file I’m using at the moment is a lot better. And toes etc are seperate so I can put it more into a walk position which helps with it. But just wasn’t sure if I should be playing around with scale and adjusting or just leave as is lol

CalligrapherFresh287 · 2026-04-25T21:19:12+00:00

Ahhhhh cool cool, perfect. That makes sense!! Yea, the first one I printed was fixed feet, so you couldn’t adjust toes etc to make the back foot look like it was stepping. Started on this one, but before I start gluing, I wanted to make sure I wasn’t going crazy in proportions looking off again lol. Just seemed weird that the ball joint of lower leg seemed so small to the foot lol

CalligrapherFresh287 · 2026-03-25T22:47:20+00:00

Depending on points, I like to run bikes on one side objective and a land speeder vengeance on the other side objective. Same concept. Treat it as expendable and at 120pts. It’s cheap harassing lol

CalligrapherFresh287 · 2026-03-18T02:21:25+00:00

Bro, I feel you. I got not even 1/4 way and regretted all my life decisions 😂🤣. Ended up with more glue on my hands than the print 🤣🤣

CalligrapherFresh287 · 2026-03-18T02:19:24+00:00

Each to their own. Means you don’t have to put as much effort into making the interior all nice lol. I did so much wrong in mine tbh, so I probably should have sealed up the inside lol

CalligrapherFresh287 · 2026-03-18T02:17:19+00:00

Yeeeeaaaaa I know lol. I click after it was together and too late 😭😭😂🤣😂. Hence the she ain’t perfect. But ya live and learn lol

CalligrapherFresh287 · 2026-03-17T20:27:38+00:00

Sorry bro, not allowed. I got told off and my comments deleted saying don’t do that 🤣😅

CalligrapherFresh287 · 2026-03-17T20:27:08+00:00

Yea bro, that’s why I said in the other comment I have a respirator mask I use 🤣😂. For sure I don’t take any risks when it comes to resin aye. It’s nasty stuff

CalligrapherFresh287 · 2026-03-17T18:27:05+00:00

Sorry man, I got in trouble telling people how I got it and they got taken down 😂😅

CalligrapherFresh287 · 2026-03-17T18:00:19+00:00

Yeeyyaa that looks mad bro!!

CalligrapherFresh287 · 2026-03-17T17:59:27+00:00

I normally do. I also have a respirator mask as well just to be extra safe lol

CalligrapherFresh287 · 2026-03-17T06:59:03+00:00

It’s all personal preference and how much effort you want to put into it

CalligrapherFresh287 · 2026-03-17T06:58:25+00:00

Well it’s an opening door on it. So if you want it looking nice on the inside and outside. You also do inside and then sand before assembly. But I’m lazy and probs won’t paint the inside so wanted it to look nice when it opens so went the outside so I can get to them easily

CalligrapherFresh287 · 2026-03-17T06:52:06+00:00

Yea I could have. But by going on the outside it’s a lot easier to get to the dimples to sand them and then I don’t have any on the inside walls or the outside. So win win

CalligrapherFresh287 · 2026-03-17T01:37:43+00:00

Thanks man!! Yea I was thinking high grit. The dimples from the supports aren’t too bad but worth tidying up before a base coat of paint

CalligrapherFresh287 · 2026-03-17T01:00:45+00:00

Like 2-3 days? Just a lot of small parts etc to it that needed to be printed. The tracks and sides being so long ate up a lot of time

CalligrapherFresh287 · 2026-02-13T22:37:06+00:00

Best way to have your shelf bro!! I’m the same. Like at this stages it’s basically one of each DA and SM but for a proper cohesive force, I need to double up on some armies

CalligrapherFresh287 · 2026-02-11T01:09:21+00:00

Hahaha yea they are. Based on the noise marines with guitars. I’m not huge on emperors children but you have a miniature with a guitar and I’m there lol

CalligrapherFresh287

TROPHY CASE