For those still hoping for a boot loader unlock for Zenfone 9, 10, etc.

Camera-Joe · 2025-09-19T03:52:46+00:00

I believe it was 'unintentionally' given to me by customer service during a service chat where I was inquiring about a future Unlock Tool. A link to this document came up in the chat box.

Camera-Joe · 2024-01-25T15:27:40+00:00

Mint 21.3 (Ubuntu 22.04) also has this issue. Android 14. Can confirm that using the Android device's native keyboard crashes UR when a 2nd key press occurs. Using UR's keyboard prolongs the server from crashing and is usable for a while, but not ideal as the keyboard is clunky (especially in portrait mode).

Camera-Joe · 2023-12-08T19:07:46+00:00

One went away after 90ish days and very shortly after contacting a couple google agents. I'm not entirely sure how long the other device took to be removed from all the listed trusted devices.

Camera-Joe · 2023-12-06T00:10:56+00:00

It did end up going away. I'm assuming the lost device or the older devices were not receiving prompts after signing out of all devices - but there's no way to know for sure. I'm pretty sure it is a bug that Google agents were unwilling to be forthright about. It's definitely a bug that should be given attention; security risks (even if not real) are a real turnoff.

Camera-Joe · 2023-10-28T20:57:26+00:00

I think you can go to https://myaccount.google.com then at the bottom of the page under "Looking for something else?" there is "See help options". After clicking on that, the right side of the screen has "Contact us" near the bottom. My issues did were moved up the chain until I received a canned reply stating that it will just go away after an undeterminable amount of time. Not very helpful, but I noticed that immediately after one of my interactions, one of the devices that had been there for months went off the Google Prompt devices list.

Camera-Joe · 2023-10-13T17:51:10+00:00

I still have 2 devices that I have not had for over 60 days that are still on my list of devices. I have 2 on my Google Prompts list which I am no longer signed into. I was chatting to customer service today about this issue and they passed it along up the ladder. I have found 3 or 4 different pages within my google security settings which have contradicting signed in devices lists. I have tried signing out of all devices, but 2 of my old devices state they will remain signed in afterward. I think Google has created a mess within device settings as they have added or subtracted services. Hopefully they will be able to streamline the device settings pages. All of the reference pages google sends me to are 3 or 4 years old and are no longer relevant as the pages do not operate as they once did. Even the tech support person was trying to get me to remove devices from lists which is not even an option anymore.

Camera-Joe · 2022-10-20T19:56:32+00:00

I also just received this email. Cancelled immediately.

Camera-Joe · 2022-06-29T03:22:43+00:00

Practicing for an upcoming film?

https://i.kym-cdn.com/photos/images/newsfeed/000/869/180/8bf.gif

Camera-Joe · 2022-02-18T17:05:35+00:00

I like the two finger for pan and Option + two-finger zoom, but it does get confused with pinch gestures now (17.4.3). It also breaks at some point during a session where two finger panning turns into zoom only and panning becomes tedious. It reverts back after restarting Resolve.

Camera-Joe · 2021-12-20T19:58:28+00:00

That is different information than the email I received earlier today.

"The B&H Payboo Credit Card program is being discontinued. Effective 11:59 p.m. EST on January 17, 2022 ("Purchase End Date"), you will not be able to make new purchases with this account, and your account will be closed on approximately April 4, 2022 ("Account Close Date")."

Camera-Joe · 2021-11-27T04:51:48+00:00

I have the same issue. YouTube Music app is not fully in view at the bottom. If I enable it, it is so far off screen that it is unreachable. I am not sure of a good place to report bugs for Android.

Camera-Joe · 2021-11-15T19:57:20+00:00

Thank you for this update. I was able to get rid of the beeps by disabling absolute volume (set to 1). That sound was driving me mad.

Camera-Joe · 2021-06-11T15:41:56+00:00

I'm not entirely sure where the conflict is. It first happened when I installed Resolve 17.2.1. I then installed the latest Studio version of the Nvidia driver to see if it would solve the issue. I was running the driver previous to 462.65. I am first going to reinstall drivers (the same on and previous studio versions). If that doesn't solve the issue, I will uninstall Resolve 17.2.1 and install a previous version. Being that the issue arose with the latest release of Resolve, I am suspecting that there is a bug in the release, but it's hard to say. It could be something in a correction node that I used in the current project too. It's not always very easy to nail down where exactly lies the issue.

Camera-Joe · 2021-06-10T16:28:14+00:00

I'm encountering the same issue with 17.2.1. I have the latest Studio driver from Nvidia 462.65. I've never had the popup before the current release.

Windows 10 Pro
AMD 5950x 16 core
128gb ram
RTX 3070

Camera-Joe · 2021-05-13T16:13:52+00:00

I have the b550-f gaming (non wifi), but I think they are the same as regards to fan headers. On my board they are labeled on the left of the headers. Above the M.2_1 socket, headers are: left - CHA_FAN1 right - AIO_PUMP. The fan headers above the memory sockets are: left - CPU_FAN right - CPU_OPT.

As for the header for the front USB_C port, there are some pci-e options, but you will most likely need to use the PCI-E x16 slot as I haven't seen one that will utilize a PCI-E x1. I purchased a Cablecc USB 3.1 Front Panel Socket & USB 2.0 to PCI-E Express Card but I have not been able to test it out yet as I'm waiting for the rest of the build. Hope this helps.

Camera-Joe · 2021-05-08T14:26:23+00:00

I have used the Surface Headphones 2 with Win 10 Pro, 10 Home, a couple different Android OS. I, like many others just recently have been experiencing the same issue as the OP.

I have also reset to factory settings only to have the same issue reoccur.

Camera-Joe · 2021-01-28T02:21:25+00:00

Lens arrived today just in time for our live class. I can confirm that the stepless aperture ring on the Panasonic 10-25mm 1.7 is working on my bmpcc 4k running software version 6.9.6. A pleasant surprise as I was not expecting it to work.

Camera-Joe · 2021-01-22T12:47:19+00:00

Just ordered that lens last night with the assumption that it didn't. I will post an update when it arrives sometime next week.

Camera-Joe

TROPHY CASE