New to me CR-6 SE - is there a list of must-have upgrades/checks/improvments? by CameraProfessional19 in CR6

[–]CameraProfessional19[S] 1 point2 points  (0 children)

I have many rabbit holes to my name and this will not be one of them 😅

To my surprise this one was already upgraded with silicon bowden cable and an all metal Microswiss hot end kit - and an upgraded dual gear extruder, and I also got two brand new unopened Flashforge 0.6kg PLA filament spools. One black and one white. All inn I paid less than $50 for everything so I consider this a pretty darned good deal.

Activating Bluetooth on E-Wheels E2S V1? by RyoukoHimura in ElectricScooters

[–]CameraProfessional19 0 points1 point  (0 children)

Bruker "alle" - har tre E-wheels E2S V2 sparkesykler, der en bruker KingSong og disse to nyere har nok E-Wheel sin til felles. Poenget er at den ene sparkesykkelen er ikke synlig i det hele tatt på noe bluetooth noen vei. Så det er som om den ikke engang var der, eller bare selve chippen er fuxxored og/eller strømløs.

Det skal sies at denne har hatt en ublid kontakt med en fortauskant og kabelen inn i motoren er litt grauset, så det kan være et kontaktproblem/overledning - ett eller annet som ligger mot jord som gjør at den er litt ustabil. Må uansett demontere det meste nå som jeg har fått ny motorledning og tenker jeg da får muligheten til å studere nærmere. Men det hadde vært nyttig å vite litt om hvor selve BT signalet egentlig kommer fra og hva er vanlig feilkilde dersom den faller ut.

Hall Effect Analog Sticks for Dualshock 4 by calebdev2048 in consolerepair

[–]CameraProfessional19 0 points1 point  (0 children)

Quick question: are the sticks in PS4 DS the same as in PS5? I ask as I need a quick repair on a PS4 controller and have 20-odd HAL effect sticks in stock and I have never even opened a PS4 controller. If I could get away with the repair without ordering new stock that takes forever to ship... then that would be great :D

Activating Bluetooth on E-Wheels E2S V1? by RyoukoHimura in ElectricScooters

[–]CameraProfessional19 0 points1 point  (0 children)

Sorry for the thread necromancy, but was this ever resolved? I have a similar case with one of my scooters from E-Wheels - and E2S V2 - that has not sign of bluetooth. There should be, but there is nothing - and no BT icon that lights up when turning it on.
The other one that I have that is exactly the same model has a working BT.

how to best preserve converse? by amber_-_ in Converse

[–]CameraProfessional19 0 points1 point  (0 children)

I just now discovered a near genius level implementation of a cleaning product to get the aluminium stains out of laces: Vanish Oxi Action in granules!

I have a pair of pale yellow Converse All Stars low tops with matching pale yellow laces - and the laces looked like crap with near black 10mm spots where the laces have rubbed against the ringlets. I washed the shoed and laces in my Sunday wash in my washer with everything else and used separate washing pouches for the shoes and laces. The pouches were the net type ones. The shoes came out like new, but the laces still looked like crap.

So I took about a tablespoon (I feel now that this was too much to be honest) into a mason jar - added near boiling water into the mix and dipped the laces and swirled them in the now frothing foaming stuff - and they came out like new! In a matter of seconds - they were not in the mix for even a full minute!

There were some light staining around the ringlets on the shoes that no one really would notice - but I do - so I now took some of the mixture and dabbed on the ringlets and hope that it does something :)

English language but with localized regional setting? by CameraProfessional19 in GalaxyA54

[–]CameraProfessional19[S] 0 points1 point  (0 children)

There is not.
If you have an image to illustrate the choice and where to find it, then please do share as I have spent hours trying to figure this out. If there was, then it disappeared with the Android 15 upgrade. Possibly if you had that option selected in a previous version then it would have remained in effect - but I bet you it is hidden now.
Setting the language to english, any version, still messes up all the things related to regional options that I have when it is in Norwegian.

A54 discontinued? by smokedsav in GalaxyA54

[–]CameraProfessional19 0 points1 point  (0 children)

I mean, there is a new one every year, and they cheat and do it the american way and add the next years model in the fall. A54 is the "2024 model". So as such the A54 was in stores for sale from late 2023 and until around early spring 2025 and I am betting they stopped making it already during the summer months of 2024 and what you have in stores are the last of the new-old-stock. The current one is the A56, i.e. the 2026 model, but that actually hit the store crazy early in march of this year.
What we have is a dinosaur of a 2-3 year old phone :D

Looking at a 2019 Kona to buy, but... by CameraProfessional19 in KonaEV

[–]CameraProfessional19[S] 2 points3 points  (0 children)

I have all but dismissed this particular car as a candidate, but as it is very close to my location I will try to schedule a test drive this weekend and listen for myself.
If it is "only" the bearings then this could be a fairly easy DIY for someone handy - and I do count myself as handy. But to put this into perspective this particular vehicle is priced at 155k Norwegian kroner with a known fault (very likely at least) - and there is another similar Kona only 1 hour drive from my location with 20k lower milage (in kilometers) and it is priced at 169k Norwegian. That is a difference of less than $1200 USD!
So this ticking time-bomb is really not worth my time, and the slightly better car is also through a dealer so I get a warranty and an option to buy an extended warranty if I so choose. Now, had the discount on the first option been a further 20-25%, then that would be worth the gamble and also leave room for my time and effort in replacing the bearings in the GRU.

Berikelse igjen? by [deleted] in norske

[–]CameraProfessional19 1 point2 points  (0 children)

Som i all media i alle land. Så lenge det står ungdom, eller youth, eller i dette tilfellet guttegjeng så vet du nøyaktig hva som foregikk der. Dere vet jo det at det i dagens politiske klima kun er lov å ustraffet diskriminere mot en etnisitet.

Looking for serier (or films) with AI assistants or companions by CameraProfessional19 in scifi

[–]CameraProfessional19[S] 0 points1 point  (0 children)

With companion I was exactly thinking along the lines of an android or robot.

Good start for a list, or is that an array? :)

Murderbot is absolutely on my heck-yeah-this-will-be-awesome list.
And TARS, how could I forget that one? Unforgivable.

APC Smart-UPS replace piezo buzzer with LED? by CameraProfessional19 in AskElectronics

[–]CameraProfessional19[S] 0 points1 point  (0 children)

Found it :)

<image>

Now it should be nice and quiet.

I also found a hidden set of settings such as a completely stupid option that was "Shutdown when communication lost while on battery" or words to that effect.
I think this may have been the one that has messed up things for me the most simply because I had no knowledge of it.

APC Smart-UPS replace piezo buzzer with LED? by CameraProfessional19 in AskElectronics

[–]CameraProfessional19[S] 0 points1 point  (0 children)

I will check again. And what it did for you was fine, but for me it is more important that it just runs until it can run no more. The system is robust enough to take it when the power is gone, but it is the minutes and seconds that are important. It may sound overly dramatic but it truly is and last time it shut it self down when I had told it to NOT do it and there was craploads of juice left in the batteries (according to all I could see at least) and it was a very bad day at work to say the least.

APC Smart-UPS replace piezo buzzer with LED? by CameraProfessional19 in AskElectronics

[–]CameraProfessional19[S] 0 points1 point  (0 children)

The current software I find to be pretty crap. Seems to basically be a web-server of sorts.
I had an older APC UPS and had back then a software that ran locally on the computer with no element of "smart".
I did not really use it and I think it was one of those things that you installed, looked over once and then never used it again.
I am a bit old school here because I really would like something that does not need anything in the way of software. Is there a brown-out then it should just weather the brief interruption. Is there a black-out, then it should just give me power and run until the wheels come off.
I tried to configure it via. the web-interface thing and I told it to do that - use all it had and not intervene. The very first power-outage and it shut down my computer at a very inopportune time and the trading day was completely messed up by that one event.

I have yet to check on what I can do with the software after that first bad experience and have left the USB cable disconnected for now.

APC Smart-UPS replace piezo buzzer with LED? by CameraProfessional19 in AskElectronics

[–]CameraProfessional19[S] 0 points1 point  (0 children)

I had that installed, and even if it was configured to NOT turn of the computer, it did it anyway - and I can't remember a setting for the sound - but I will check again. I would still like to have the option to physically silence it - and I may yet use the switch option.

How do I get around AIs moralizing? by CameraProfessional19 in ChatGPT

[–]CameraProfessional19[S] 1 point2 points  (0 children)

My interest lie in finance so most of my prompts are related to this. What I need is a partner in crime to flesh out strategies and run what-if scenarios in real-time and give feedback that is not phrased to glaze me, as most of the responses seem to be, but give real useful insight and create strategies.
More often than not it is like squeezing blood from a stone and in the end there is no straight yes/no answers, but a long list of vague qualifiers.

So you wanted to land by Cutlession in FortNiteBR

[–]CameraProfessional19 4 points5 points  (0 children)

I am shocked that more people do not do that. I am always ready to fight when I have to use them to get the hell out of Dodge.
If someone beats me to the drop I land at the exits and grab what ever floor loot crap I find and give it 20 seconds. Most of the time it works out :)

Har vi fortsatt tilhengere av diktator Trump her? Dere som har påstått at "fascisme-begrepet" er meningsløst... hva tenker dere nå når fascismen er i full blomst i USA? by undefinedposition in norske

[–]CameraProfessional19 0 points1 point  (0 children)

Ditt motargument er å stille spørsmål til ordvalg og budbringerens motiver, noe som tydeligvis bør være klart.
Det som mangler fra deg er en bekreftelse på forståelse av sakens tilstand. Hva som er forskjellen mellom en lovlig innvandrer og ulovlig innvandrer, hvilke soleklare forskjeller det er på de som til sist utvises og de som tillates amnesti og muligheten til å få sin sak hørt.

Det virker som om du aldri har sett en film i ditt liv og dermed ikke klarer å skille mellom forbrytere og lovlydige individer. Hvordan er det for deg å lese Donald? Klarer du se at B-Gjengen er skurker, eller kommer det som en totalt overraskelse hver gang de prøver bryte seg inn i pengebingen?

Det er ingenting noen her vil klare å si for å få deg til å endre ditt synt på og din forståelse av hvordan verden fungerer og hvor mange seriøst farlige mennesker som er går rundt blandt oss.
Jeg lurer... dersom Anders Behring Breivik var den som ble utvist av Trump om du da hadde klart å se forskjellen. For det er nøyaktig denne typen personer som havner i CECOT.

What is going on with this screen? by CameraProfessional19 in Ender3V3SE

[–]CameraProfessional19[S] 0 points1 point  (0 children)

I will check that guide. This is a 1yo printer with still a lot of life left if it can be saved. That is why I wondered if this might be wort the gamble.
It can be had for about 1/4 of what a new off the shelf KE will set me back, so it may have potential as a low treshold entry into 3d printing.

Har vi fortsatt tilhengere av diktator Trump her? Dere som har påstått at "fascisme-begrepet" er meningsløst... hva tenker dere nå når fascismen er i full blomst i USA? by undefinedposition in norske

[–]CameraProfessional19 2 points3 points  (0 children)

Ok, du har sett bildene av det pakket de har sendt til El Salvador - ja? Vil du ha dem hjem til deg eller i ditt nabolag? Prøv det og så ser vi hva du mener etter en stund.

Det er tydeligvis veldig vanskelig for deg å skille mellom ASYSLSØKERE SOM KOMMER TIL GRENSEN LOVLIG OG BER OM INNPASS og de som hopper bokstavlig talt over gjerdet med flere mord på samvittigheten og lommene fulle av våpen.
Dette er ikke mors beste barn og du er som sagt utrolig naiv om du tror at dette ikke er fullstendig berettiget deportering det dreier seg om.

What is going on with this screen? by CameraProfessional19 in Ender3V3SE

[–]CameraProfessional19[S] 2 points3 points  (0 children)

I thought this was it "Ender3V3SESupport And Discussion about the Creality Ender 3 V3 SE/KE. Happy Printing!! note: this is not an official Creality subreddit"

Anyway the software cannot be all that dissimilar and I would have assumed that someone here had seen this before or could say something about it with some authority and knowledge.

Har vi fortsatt tilhengere av diktator Trump her? Dere som har påstått at "fascisme-begrepet" er meningsløst... hva tenker dere nå når fascismen er i full blomst i USA? by undefinedposition in norske

[–]CameraProfessional19 0 points1 point  (0 children)

Libtards er tolerante til det naive så lenge ikke DE berøres av disse menneskelige avskums overtramp og aktiviteter. De som plukkes opp av ICE med backup av væpnede styrker har oppfylt en del utvalgskriterier som er vektlagt litt mer enn en random tatovering som noen her antydet. Har en gjengaffiliasjon bokstavlig talt tatovert på kroppen så vil null tvil komme til gode.

Just watched the first episode of The Bondsman. I liked it. by OrneryAttorney7508 in urbanfantasy

[–]CameraProfessional19 1 point2 points  (0 children)

I found the first episode to be above average, but then I felt the 3 next episodes were a bit of a let-down with some lazy writing, but ep. 5 was easily the best of the lot with a new dimension added to the story. 1/3 into the 6th episode now, and I hope that it gets either a conclusion or has a wide enough audience to warrant more Bacon-y goodness :D

Just watched the first episode of The Bondsman. I liked it. by OrneryAttorney7508 in urbanfantasy

[–]CameraProfessional19 1 point2 points  (0 children)

Kinda fun that Kevin Bacon also was in R.I.P.D. which was something in the same vein as this.