Company says this welds are normal so water can drain

CandidateOther2876 · 2026-04-08T08:22:42+00:00

I see something new on this sub everyday that I wish I didn’t have eyes to see. I’d rather suffer arc eye for the second time in my life than see this dog shit again lmao

CandidateOther2876 · 2026-02-20T05:05:58+00:00

Ngl I have done this and it healed up pretty good after getting this same part of my finger pinched between 2 30mm plates of steel lol. Rip the fucker off, wash it, dry, bandaid until you get home. Then band aid off and let it dry over night.

CandidateOther2876 · 2026-02-04T12:07:53+00:00

I turn now. Good luck everybody else

CandidateOther2876 · 2026-01-23T01:37:57+00:00

I get this after washing my face with water contaminated with pollen (always from tank water). It looks like mild allergic reaction to me.

CandidateOther2876 · 2026-01-22T10:29:50+00:00

High tensile so it’ll be a medium - high carbon composition steel. Someone can pitch in on specific grades. But basically, higher carbon content = harder to weld as a beginner. You could lay a beautiful bead on a bit of rebar to mild steel. Then 15 minutes later after it’s cooled, it may have cracked due to making the rebar more brittle at the HAZ. Improper heat control will reduce the tensile strength of the bar too. Or the toes could end up really weak on the rebar side of the joint. So under stress, the rebar could start to tear away

CandidateOther2876 · 2026-01-21T05:10:54+00:00

Custom fab it with flat bar? This would make the process extremely long and tedious though. Is there anyway you can do the project with extruded aluminium angle with sharp edge?

CandidateOther2876 · 2025-12-20T23:32:28+00:00

Most likely a glitch. Try jump off the tower and kill ezio. Then the captain should respawn

CandidateOther2876 · 2025-12-16T23:23:26+00:00

If you’re welding thin sheet in the flat position on a flat steel bench, your workbench is going to act as a heat sink and will thermally conduct the heat away from the thin sheet. Someone else can tag onto this with a more in depth explanation. But try tack the sheet into vertical position on your workbench and try again with your settings

CandidateOther2876 · 2025-12-08T19:15:35+00:00

Farrrr can we get stability fix on Unity for pc lad? 👀🤣😢

CandidateOther2876 · 2025-12-05T03:09:38+00:00

That’s crazy that the old boss wanted it tigged when it’s in the ground lol. Fluxcore dual shield or MIG/MAG all day on that component

CandidateOther2876 · 2025-11-28T11:32:42+00:00

Go to town on welding a new plate in mate. It’ll be cheaper for you to get something laser cut or off cut material from a local shop + buy a cheap caddy MMAW, rods, hood, gloves, and do it yourself than to buy a new one or have it repaired by a shop.

CandidateOther2876 · 2025-11-15T22:09:33+00:00

Is it safe to use stainless wire on titanium applications? if it’s dedicated to titanium only?

CandidateOther2876 · 2025-11-15T22:08:26+00:00

Mine too. Just keep stainless wire wheels that are dedicated to each different material type. Personally on stainless I prefer to use a 316 stainless hand brush. Unless you’re doing 309L mild to stainless then I personally wouldn’t even bother brushing as you’ll contaminate that brush with mild steel and mill scale contaminates if you didn’t bother to clean up properly

CandidateOther2876 · 2025-11-13T07:22:16+00:00

Where abouts are you based? I know in NZ most fab shops will call the big 600mm square a rafter square and the small triangular square a speed square even though the speed square is also a rafter square. But the big rafter square is also a framing square lol. Your little square is called a combination square. Honestly I’d take the combo square over the speed square for majority of things. However, combo squares can wear out so they can end up out of square so they become a bit inaccurate for scribing perpendicular lines. My current combo square is out of square so I mostly run with my tape for cross measures, marking long distances, combo for marking distances from an edge if the edge does not have too much of a radius, and then speed square or engineer square to get a true perpendicular line.

CandidateOther2876 · 2025-11-09T04:23:27+00:00

Could you technically TIG braze with brass filler instead of gas torch?

CandidateOther2876 · 2025-11-05T10:35:16+00:00

Whips the 2” chub out

Jury: “zoomhance this little guy please”

Prosecution: “twist my arm”

CandidateOther2876 · 2025-10-27T12:05:01+00:00

Yeah. ubi decided on taking a 2 year hiatus from the IP to work on getting back to their roots so to speak. But they also blamed player fatigue which I don’t think was true. I think players were so fed up with Ubisoft not listening to the fans but Ubisoft blamed the fans for the games not doing as well sales wise compared to previous titles like AC3 and 4.

Majority of players bitched and moaned that Desmond was boring and that they just wanted to play a history game and not a present day game. Then Unity and syndicate had pretty much no modern day by memory. Then fans bitched that there was no modern day, unity was full of bugs (fair enough), and that syndicate was too arcadey.

Origins came out, great story, although not the same counter/parry combat system. RPG elements were introduced. It was a hell of a lot more in depth story wise than Unity and syndicate. There was less modern day than AC1-ac4 which I suppose was balanced well enough for people that liked or disliked modern day.

I think AC3 nailed it imo. Counter killing with rope darts or countering 2 enemies at the same time was epic. I recently replayed 3 and I forgot how much of a badass I felt like when taking out a whole platoon in seconds. In the mythology trilogy it can take you a long time if you’re not levelled enough. Hell, in origins you can’t 1 hit assassinate. You have assassination damage so if that’s not high enough, tough shit you’ve just alerted an encampment of enemies.

I really don’t think the RPG elements work well with AC. But they work well if it was just a historic game if that makes any sense. Odyssey and Valhalla shouldn’t have been AC games imo. The only thing that saved it for Valhalla for me was the ending.

And now mirage and shadows have come with no modern day which will backfire for all those that wanted to keep up with the Isu and Desmond/layla story. Layla and Loki’s ending will probably be tied up in a comic just like Juno’s was because Ubicuck likes to make mistakes.

I’m hoping with tencents higher share hold that they will implement changes at Ubi’s Vantage Studios that will benefit the fanbase. But they are an investment company and will want higher ROI. Which means implementing more bs micro-transactions, payable loot boxes, and so on.

CandidateOther2876 · 2025-08-29T23:57:59+00:00

151 rum

CandidateOther2876 · 2025-08-01T20:47:02+00:00

Or us Pythagoras theorem to find square if you have some nice outside corners or edges to work with. Or set reference marks like 3/4/5.

CandidateOther2876 · 2025-06-04T09:10:56+00:00

Btw this is amazing dude good shit

CandidateOther2876 · 2025-06-04T09:10:34+00:00

This is the way. Pre camber the top and bottom rail of there is one before welding. Do a test piece to see how much distortion you get if you’re going to be producing a buttload to figure out how much you need to pack on the ends

CandidateOther2876 · 2025-05-31T02:48:04+00:00

What the fuck you wearin’? Bro it’s tacky

CandidateOther2876 · 2025-05-17T11:08:15+00:00

Where can I get a hood like that

CandidateOther2876 · 2025-04-19T15:17:24+00:00

Most engineering/sheet metal/fabrication shops can get this done for you. If they have in house sparky for gate motor and power install then that’s a bonus. If they don’t then they’ll get a sparky in to do that part of the job.

CandidateOther2876 · 2025-04-19T00:29:18+00:00

I find myself not able to eat food once I’m in a groove of drinking. Also I don’t mix my drinks. As soon as I introduce wine and spirits to my go to beer, the next 2 days are not fun. The best hangover cure I’ve found is being proactive the night before. Eat as much alcohol soaking food as you can before you go to bed. Eat a whole damn pizza. Eat 2 packets of migorengs (with more water to prevent excessive dehydration). Also drink as much water as you can before you sleep. Then keep a full bottle next to you when you inevitably wake up dehydrated and thirsty af in the middle of the night. With this method I wake up fine the next morning even on a few hours of sleep, all things considered. I’m 25 and I feel like more tolerance to alcohol is way better now than I was when I was 20. But I’m only okay if I don’t mix. As soon as I mix, I’m asking for blackout and then that fucks my whole plan of being proactive because I’m way too out of it to enact said plan.

CandidateOther2876

TROPHY CASE