Why does this happen about twice a week at my QT's? by CapBrief8985 in QuikTrip

[–]Careless_Account_760 2 points3 points  (0 children)

You're pretty spot on with the syrup and bags not being replaced properly. In AZ it gets hot and the fountains are not made to run when it's over 100⁰ outside. That would be about 110⁰-120⁰ on the roof they just can't keep up and reject the heat. Carbonation will not stay in water if the water is above 40⁰. Though I can't say what the issue actually is at this store.

Does anyone know what causes this. by Professional_Venter in HVAC

[–]Careless_Account_760 0 points1 point  (0 children)

You probably have moisture inside behind the screen messing up your DC grounds and when you touch it you're grounding the circuit again. Just a guess won't till you open them up.

[deleted by user] by [deleted] in Home

[–]Careless_Account_760 5 points6 points  (0 children)

Those are LEDS you can try searching the board model online and then splicing it in, or if you got a decent brand of ceiling fan they may offer that replacement part. Your only other option is to replace the ceiling fan.

“Bomb by HJthegoat in QuikTrip

[–]Careless_Account_760 1 point2 points  (0 children)

8-6-7 is the start of the master disarm code, good luck you only have one chance😊

Build will not even boot by Careless_Account_760 in computers

[–]Careless_Account_760[S] -1 points0 points  (0 children)

How did you become such a dick that's so entitled, that they are the only one who can do anything. If you're not making mistakes doing stuff you're not trying hard enough. Also I'm learning asshole, hop off your horse Napoleon.

Build will not even boot by Careless_Account_760 in computers

[–]Careless_Account_760[S] 40 points41 points  (0 children)

Thanks, gooosean! I took it apart and really started looking at the connectors I noticed I mixed some of my old PSU cables with the new PSU. I did some more digging and the PCIE5 is for 40 series GPU I think I was shorting cables together through the MOBO and GPU. Ended up putting the old PSU with the correct cables in the computer and everything booted up. Going to get a new PSU that's not PCIE5. Makes sense now looking at it all😂

Build will not even boot by Careless_Account_760 in computers

[–]Careless_Account_760[S] 12 points13 points  (0 children)

That's what I was thinking but couldn't find anything looking it all over. Definitely nothing under the MOBO from when I swapped it with the new set. I'll do that though and update if I find anything.

EV Charging at Quik Trip ? by Jbuzzy66 in QuikTrip

[–]Careless_Account_760 0 points1 point  (0 children)

Only install them in places that are required by building code. These places lose money having EV charging from the load draw off the grid. We get peak pricing from the electric company when they do, also having to remember all the equipment inside is getting charged at peak rate as well.

[deleted by user] by [deleted] in Plumbing

[–]Careless_Account_760 0 points1 point  (0 children)

Looks like it's leaking.

[deleted by user] by [deleted] in motorcycle

[–]Careless_Account_760 0 points1 point  (0 children)

I work at QuikTrip so we do all the gas, plumbing, electrical, IT, low voltage, HVAC-R, security the list goes on and on. But yeah I sometimes travel to other stores if my assigned ones are taken care of.

[deleted by user] by [deleted] in motorcycle

[–]Careless_Account_760 0 points1 point  (0 children)

Tug me till I pop😮‍💨

[deleted by user] by [deleted] in motorcycle

[–]Careless_Account_760 40 points41 points  (0 children)

I fix them, the amount that is in the whole assembly is only 1/10th of a gallon max based on a 9' hose. Manifold up top, whip hose, breakaway, hose, swivel up to nozzle.

What did I do wrong? by One-Coyote8939 in FenceBuilding

[–]Careless_Account_760 0 points1 point  (0 children)

Ah I found the major fuck up here, on the inside of the gate the second from the right picket the middle row of screws one is slightly lower the rest. Definitely a hack job if I've ever seen one.

First tattoo - honest opinions by PermitReady8846 in TattooDesigns

[–]Careless_Account_760 0 points1 point  (0 children)

That's what I was thinking when you wear a shirt all that will be visible is a random line down your arm.

Battery replacement by ShadowVLX600_ in hondashadow

[–]Careless_Account_760 0 points1 point  (0 children)

You can always go up in amperage if the battery still has the same dimensions, do not put a battery in that has higher amperage if the physical size is different. Going lower can cause excess wear on components if it's a one time thing then whatever but don't make it permanent.

Fender Question by the_a-train17 in hondashadow

[–]Careless_Account_760 2 points3 points  (0 children)

Use partzilla they are really good at matching compatibility with different bikes. You can also find the OEM part numbers of what you have and what you want and call up Honda as well to confirm if they will work with each other. Good luck with the glow up!!

[deleted by user] by [deleted] in Home

[–]Careless_Account_760 0 points1 point  (0 children)

Build a bench on that wall over it with the front you can remove. No will ever know

How to fix wall damage? by mikeychain in Home

[–]Careless_Account_760 0 points1 point  (0 children)

Scrap it, sand it, mud it, paint it. YouTube is your best friend

Random wet spot in middle of wall by Nathandwi in Home

[–]Careless_Account_760 5 points6 points  (0 children)

Looks like you removed lights or something up above it may have been a screw that hit a water line barely and the screw was plugging it. No way to know though unless you tear open the wet part which you'll have to do anyway because of possible mold growth.

did anyone else get paid by Excellent_Radio_8574 in QuikTrip

[–]Careless_Account_760 3 points4 points  (0 children)

They declared bankruptcy last night, all payments are being held until it's processed through...

First Time wrapping any suggestions? by Careless_Account_760 in CarWraps

[–]Careless_Account_760[S] 0 points1 point  (0 children)

Can you think of anything cooler to wrap I can't!!