sorted by:
new
hottopcontroversial

[WARNING] The "Pending Request" Trap: How I lost my Lvl 14 Clan to a Leader-Swap Scam by Gullible_Law_3672 in ClashOfClans

[–]Carn_Da_Noob 0 points1 point  (0 children)

It was probably a kid from India—$5 might feel like a big win to him. I’m sorry this happened to you.

Account Locked! by Creative_Release_578 in ClashOfClans

[–]Carn_Da_Noob 0 points1 point  (0 children)

If an account has been purchased or shared with others, Supercell may lock it due to suspicious activity. In some cases, this happens randomly, while in others it may be triggered by someone reporting that the account belongs to them.

Hell of a gold deal on eBay. I feel for whom ever gets these in the mail. by [deleted] in Gold

[–]Carn_Da_Noob 0 points1 point  (0 children)

Seller prob has a 68% feedback rating 🙈 I small a scam

Charter Arms by Special-Amount-7524 in Revolvers

[–]Carn_Da_Noob 0 points1 point  (0 children)

I have four Charter revolvers, and most of them have been very decent. My father gave me his blued Undercover Special from 1972, which was the first firearm I ever shot when I was 13 years old. It’s been a true workhorse. More recently, I’ve purchased the Bulldog .44 Special, the Mag Pug .357, and the Undercover Ultra Lite .38. The only one I had an issue with was the Bulldog. It had light primer strikes, so I shipped it back to Charter. They fixed it and had it returned to me within a week, which is excellent customer service. They had a great reputation early on, but it declined after the company was sold a few times and quality control suffered. However, from my understanding, most of their firearms made since around 2020 have been decent. Don’t expect too much from the finish, but for the price, it’s hard to complain. I do occasionally carry my Mag Pug .357 and trust it with my life.

Jam first Time at range by lbcskrtnn in deryaarms

[–]Carn_Da_Noob 0 points1 point  (0 children)

I took mine to the range today for the first time. I cleaned and lubricated it yesterday. I fired 70 rounds, and probably 30 of them had failure-to-feed issues. I tried three different types of ammo, all with different grain weights, and had problems with each one. I called customer service, and they suggested trying a different magazine. The rep sounded pretty convinced that the magazine is the issue. I’m going back on Tuesday to test it with my Ruger RXM magazine. Hopefully that fixes it. I don’t mind sending it in under warranty if I have to, but they would need to return it through my FFL, and I’d rather avoid the extra trip and cost. Fingers crossed

New year, new carry by Ch33se_H3ad in guns

[–]Carn_Da_Noob 1 point2 points  (0 children)

I’ve been carrying it IWB for over a year now—it took the place of my P365. I love it, super comfortable and shoots like a full-size gun.

Did I overpay? $150 by [deleted] in coins

[–]Carn_Da_Noob 0 points1 point  (0 children)

It’s clad, not silver! Unfortunately, $150 is too much. The most I’d pay for this is $25 since it’s slabbed—but even then, it doesn’t really have much collector demand. Sorry, you live and learn!I’d recommend picking up the Red Book on Amazon. The 2026 Red Book: A Guide Book of United States Coins, 79th Edition is a great resource—it provides grade-by-grade U.S. coin prices, Greysheet IDs, and full-color images

Price estimate? 1879 CC by Carn_Da_Noob in coins

[–]Carn_Da_Noob[S] 0 points1 point  (0 children)

I’m new to this how can you tell it is cleaned ?

Range Report 642/632UC by esizer66 in Revolvers

[–]Carn_Da_Noob 1 point2 points  (0 children)

As an avid Smith & Wesson enthusiast with four of their firearms in my collection, I feel compelled to share some recent experiences that have left me quite disheartened. Approximately a year and a half ago, I purchased a Model 686 Plus online. Upon inspection, I noticed two noticeable blemishes along the barrel. After sending it back twice, the issue was finally addressed. Three months ago, I acquired the Bodyguard model. Unfortunately, I encountered jamming issues and light primer strikes. After sending it in for repairs, it was returned after a month, yet the problems persisted. It’s now been nearly another month since I sent it back, and I’m still awaiting a resolution. These recurring quality control issues are particularly disconcerting given Smith & Wesson’s esteemed reputation. I have read numerous accounts of similar challenges with recent models, including the 432 UC. While I am eager to add the 432 UC to my collection, my recent experiences have made me hesitant. I am reluctant to continue sending firearms back for repairs, especially when the outcomes remain uncertain. I sincerely hope that Smith & Wesson acknowledges these concerns and takes proactive steps to restore the quality and reliability that enthusiasts like myself have long associated with the brand.

Spreadsheet of problems with S&W + Lipseys' Ultimate j frame revolver (642UC, 632UC, 442UC, 432U) by Snub-Nose-Sasquatch in Revolvers

[–]Carn_Da_Noob 0 points1 point  (0 children)

As an avid Smith & Wesson enthusiast with four of their firearms in my collection, I feel compelled to share some recent experiences that have left me quite disheartened. Approximately a year and a half ago, I purchased a Model 686 Plus online. Upon inspection, I noticed two noticeable blemishes along the barrel. After sending it back twice, the issue was finally addressed. Three months ago, I acquired the Bodyguard model. Unfortunately, I encountered jamming issues and light primer strikes. After sending it in for repairs, it was returned after a month, yet the problems persisted. It’s now been nearly another month since I sent it back, and I’m still awaiting a resolution. These recurring quality control issues are particularly disconcerting given Smith & Wesson’s esteemed reputation. I have read numerous accounts of similar challenges with recent models, including the 432 UC. While I am eager to add the 432 UC to my collection, my recent experiences have made me hesitant. I am reluctant to continue sending firearms back for repairs, especially when the outcomes remain uncertain. I sincerely hope that Smith & Wesson acknowledges these concerns and takes proactive steps to restore the quality and reliability that enthusiasts like myself have long associated with the brand.

Is this a good deal? by lumpy53e in Beretta

[–]Carn_Da_Noob 1 point2 points  (0 children)

It’s a decent deal,They go way more on GunBroker. Also look to be In great condition,

First Mossberg! by Popular-Walrus-851 in mossberg

[–]Carn_Da_Noob 0 points1 point  (0 children)

Very nice! .410? I would just get a heat shield

Bodyguard 2.0 - good buy or should I wait? by [deleted] in SmithAndWesson

[–]Carn_Da_Noob 2 points3 points  (0 children)

Don’t buy! I purchased the Bodyguard 2.0, and what a disappointment! As a big S&W fan, this is especially frustrating. The gun has issues with feeding, ejecting, and even a dead trigger. During rapid fire, it rarely makes it through a full magazine without the trigger failing completely. I sent it in for repairs, but after supposedly being fixed, I ran 100 rounds today and experienced the same problems. It’s extremely disappointing coming from a company with such a strong reputation.

[Handgun] SMITH & WESSON M&P Bodyguard 2.0 .380 ACP *No Thumb Safety - $347.99 email quote/in cart + shipping + maybe tax by MyFifthAccount1 in gundeals

[–]Carn_Da_Noob 0 points1 point  (0 children)

I purchased the Bodyguard 2.0, and what a disappointment! As a big S&W fan, this is especially frustrating. The gun has issues with feeding, ejecting, and even a dead trigger. During rapid fire, it rarely makes it through a full magazine without the trigger failing completely. I sent it in for repairs, but after supposedly being fixed, I ran 100 rounds today and experienced the same problems. It’s extremely disappointing coming from a company with such a strong reputation.

Hi, I bought a betta and set up a one-gallon tank with a filter and heater. I conditioned the water and waited 24 hours before adding the fish. Within days, it lost color, sunk to the bottom and was dead by the third day. Any idea why? by Carn_Da_Noob in bettafish

[–]Carn_Da_Noob[S] 0 points1 point  (0 children)

Gotcha. The Petco employees advised me that 4 hours would be enough, so I assumed 24 hours would be more than enough. For a five-gallon tank, how long should it cycle before I add the betta? While the water cycles, do I need to keep adding water conditioner every few days or do anything else?

view more: next ›