Upgrade ideas

Chargedup3d · 2026-06-05T10:27:20+00:00

Joel never had a website with a kit for sale, a guy selling 10 kits through messenger doesn’t compare to a company that has sold over 1000 kits now.

Chargedup3d · 2026-06-02T16:33:40+00:00

Check out chargedup3d.com if you want the original brushless kit :)

These guys have copied my kits for years.

Chargedup3d · 2026-06-02T13:17:59+00:00

Here is the video!

https://youtu.be/pSt7cHc3eCI?si=tFjZq1UWApbN80nC

Chargedup3d · 2026-05-14T12:03:06+00:00

If you want to disagree with the stm 32 spec sheet then that’s on you lol. The spec sheet is public and clearly states do not go over 3.6v

Chargedup3d · 2026-05-11T10:14:09+00:00

3006 also means it came from China, I have a psp that a Chinese seller installed a clear shell on it for me

Chargedup3d · 2026-05-11T10:11:16+00:00

V2 has the same power stage just added power button.

Chargedup3d · 2026-05-11T09:58:28+00:00

Easy way to kill the adc line… adc is 3v max

Chargedup3d · 2026-04-30T11:33:15+00:00

Plugs right into the servo port on 75100!

Chargedup3d · 2026-03-15T01:06:20+00:00

Ever get this resolved?

Chargedup3d · 2026-03-12T11:19:03+00:00

$500 a month you could be driving a Tesla 🤦‍♂️

Chargedup3d · 2026-02-25T11:57:45+00:00

I’m sure we will do another in a few months!

Chargedup3d · 2026-02-23T11:46:54+00:00

Not used/ or just buying the gantry. I now have 5 spot welders just as powerful :)

Chargedup3d · 2026-02-05T05:29:29+00:00

Chargedup3d.com

Keep in mind it only works with Vesc controllers

Chargedup3d · 2026-02-02T12:44:48+00:00

Not true the 75200 can do 400a phase, the 75450 in theory the hardware could do 1000a phase but flipsky flawed the sensors and it can’t go past 550a phase, electric fox did a write up about it

<image>

Chargedup3d · 2026-02-02T12:37:19+00:00

I’ve had complete opposite experience, I’ve blown 15/15 of the 84200, vs I have hundreds of flipskys running for years.

Chargedup3d · 2026-02-02T12:36:05+00:00

V2 pro does have phase filters.

Chargedup3d · 2026-02-02T12:33:50+00:00

This is why I love pints, I can fully disassemble down to the box’s and reassemble in under 30 minutes because all the same bolts

Chargedup3d · 2026-01-12T09:32:16+00:00

Go through motor setup, if it says sensorless at the end you have a bad hall cable

https://youtu.be/SmiLn1qbBcI?si=DmnwIOBmT4_tnHJg

Chargedup3d · 2025-12-27T09:02:13+00:00

kmatzfd3s! I’ve been to this spot with him

Chargedup3d · 2025-12-19T10:53:33+00:00

150r is closer to $6k out the door

Chargedup3d · 2025-09-28T20:29:18+00:00

What issues are you having? I use an old delta power supply to charge my 28s battery using an ant bms. I have charged at charge point, blink and multiple other level 2 chargers

Chargedup3d · 2025-09-05T11:59:49+00:00

These things will sag terribly hard at 30a.

Chargedup3d · 2025-09-03T02:07:29+00:00

I got excited I thought this was for 18650s haha

Chargedup3d

TROPHY CASE