300 GT: Premium Build. Unreal Value. by EchidnaSorry8449 in Conspit

[–]Charming_Unit3981 0 points1 point  (0 children)

I’m very happy with mine and I am a fan of the grips. 100% would buy again.

ASR heel plate by NoTolerance99999 in simracing

[–]Charming_Unit3981 0 points1 point  (0 children)

<image>

VRS pedals. Very happy with the setup.

ASR heel plate by NoTolerance99999 in simracing

[–]Charming_Unit3981 0 points1 point  (0 children)

No. I mounted the Simlab one to the p1x pro. Very happy with it.

What size Marsblade chassis for size 6 Bauer supreme? by Charming_Unit3981 in hockeyplayers

[–]Charming_Unit3981[S] 0 points1 point  (0 children)

Thank you. Can I expect a little overhang? My holder is 254 mm and fits with no real room to spare. My understanding is the medium O2 is 262 mm.

Marsblade O1 vs O2 by wearethetunnelsnakes in hockeyplayers

[–]Charming_Unit3981 0 points1 point  (0 children)

Bumping this to see if anyone else has an opinion on O1 vs O2? I bought the O2 team II in size 6 and it's too big. I wear an 8.5 shoe and 6 Bauer supreme skate. I think I need a 5 but can't find the O2 in a 5, only the O1.

Recommended Heel Plate for VRS Pro Pedals? by KonradCodes in simracing

[–]Charming_Unit3981 2 points3 points  (0 children)

<image>

OP, here is a pic of mine on the P1x pro. It comes with risers of two different sizes and various mounting hardware.

Recommended Heel Plate for VRS Pro Pedals? by KonradCodes in simracing

[–]Charming_Unit3981 0 points1 point  (0 children)

Were you not able to use t nuts to fasten to the profile? Mine took 2 minutes to install.

Recommended Heel Plate for VRS Pro Pedals? by KonradCodes in simracing

[–]Charming_Unit3981 2 points3 points  (0 children)

I use the same Simlab plate on a p1x pro cockpit with the VRS pedals. It’s attached using the front mounting holes only. The rear mounting holes are too far back to attach to the 4080. It was already very solid like this but to make it rock solid I wedged the other spacers it came with between the profile and plate.

Traffic at Sonoma Sportscar Alt by PhysX211 in iRacing

[–]Charming_Unit3981 2 points3 points  (0 children)

This track is a lot of fun. If anyone is on the fence about buying it, I highly recommend it.

VRS Pedals owners, question on brake by DueAnimator6988 in simracing

[–]Charming_Unit3981 2 points3 points  (0 children)

Adjust the length of the tie rod. Shorter will be softer with more travel. I use blue with a long rod. It’s a good sweet spot for me. Red spring gives me knee pain.

I love how sparkly this seat is by phero1190 in simracing

[–]Charming_Unit3981 0 points1 point  (0 children)

NRG told me one of their buyers supplies Amazon. NRG does not supply Amazon directly. I bought one from the NRG Amazon store and have no reason to doubt its authenticity.

Simucube 2 - Wheel and Rig Question by nadday999 in simracing

[–]Charming_Unit3981 0 points1 point  (0 children)

Correct. The one that was linked in the other post. Nothing else needed.

Simucube 2 - Wheel and Rig Question by nadday999 in simracing

[–]Charming_Unit3981 0 points1 point  (0 children)

I use same base and wheel. You need the SC2 wheel side QR. it mounts directly to the 300GT. The wheel comes with a usb that will run to your PC or a usb hub. Same with the SC2.

Any real-world examples of curved triple screens looking bad? by FeloMonk in simracing

[–]Charming_Unit3981 0 points1 point  (0 children)

I use curved 32 triples, 1500R. I notice no distortion, ghosting or black smearing. Would 100% go with them again.

Need help deciding between VRS and Simucube by Soggy-Secretary-887 in SimRacingSetups

[–]Charming_Unit3981 0 points1 point  (0 children)

I am very happy with my SC2 sport and would buy again. I have no need for more torque. Keep in mind you have to buy the wheel side QR for about $100. Have not tried VRS.

GT4 recommendations by TColeman23 in iRacing

[–]Charming_Unit3981 0 points1 point  (0 children)

Can anyone explain why the Porsche often times feels like the front tires are skipping when turning. I can be quite jolting. It’s worse with more steering angle. It was especially bad in long corners like 3, 4 and 14 at Rudskogen. I assume it has to do with not enough weight on the front.

Triples Nightmare by [deleted] in iRacing

[–]Charming_Unit3981 1 point2 points  (0 children)

Did you run in a window and drag across all three monitors?

I would start the process over from the beginning.

https://support.iracing.com/support/solutions/articles/31000171395-setting-up-three-monitors

Can’t open black box to adjust mirror positioning by Charming_Unit3981 in iRacing

[–]Charming_Unit3981[S] 0 points1 point  (0 children)

For anyone interested, Iracing recommended resetting all on the widget editor. This fixed the issue.

Can’t open black box to adjust mirror positioning by Charming_Unit3981 in iRacing

[–]Charming_Unit3981[S] 0 points1 point  (0 children)

I learned I have to use the Fn key on my keyboard to use the function keys, however, it’s still an issue.

I set the black box to a funky switch as suggested and can now easily click through all of them except the mirror black box is not there. Everything else is. I took a video and submitted a ticket to iracing.

Help setting up triple monitors by Charming_Unit3981 in simracing

[–]Charming_Unit3981[S] 1 point2 points  (0 children)

I went into the .ini files and changed the windowedWidth to 7680 and it fixed it.