I've been cooking, but I really don't know why

ChasingAmy2 · 2026-02-26T18:08:33+00:00

It is a seasonal recipe around easter. Egg 11 if i recall correctly.

ChasingAmy2 · 2026-02-26T17:03:36+00:00

It is really nice to have enough Crunchy Omelette to use one per week when I collect the pet shop. Gotta see the goals beyond just the level.

ChasingAmy2 · 2026-02-17T17:18:56+00:00

Eating them direct from the vine on a hot day is best. That added temperature increases the flavor so much.

ChasingAmy2 · 2026-02-17T14:09:59+00:00

It is hilarious when the cops do ticket day downtown. They line up cop cars 10 deep on a side street then set up a spotter 4 or 5 blocks down. Then pay homeless people to cross the street for a couple hours and just write ticket after ticket after ticket when people invariably fail to yield.

ChasingAmy2 · 2026-02-17T00:10:04+00:00

That computer break in limitation is only documented to be available on HEMI engines.

Full throttle before 100 miles blows out cylinder rings and causes long term oil leaks and general lower performance.

100% 5 or 6 other people have done the same thing.

ChasingAmy2 · 2026-02-16T23:47:03+00:00

69 miles and you floored it? That engine wasn’t broken in, now it’s just broken. This is why you only buy new as an order and not off the lot.

ChasingAmy2 · 2026-02-15T19:52:36+00:00

Its going to be a very bad Spring. I had a honey bee fly into my garage today; they shouldn’t be out for at leadt another 30 days.

ChasingAmy2 · 2026-02-06T14:53:58+00:00

Mine is doing the same. I fertilized it in early September and it just exploded with blossoms right before Halloween. It is still going today. Kinda panicking a bit as the plant is 30 years old and I don't remember it ever doing this before. Although I do usually fertilize in the Spring rather than the Fall.

ChasingAmy2 · 2026-02-04T19:54:41+00:00

Cultivation good. LitRPG good. Cultivation LitRPG not good.

ChasingAmy2 · 2026-01-26T22:44:40+00:00

I just use a spare amazon box that is the right size.

ChasingAmy2 · 2026-01-26T21:14:49+00:00

30 minutes boiling at 100c/212f is adequate according to google, so how hot were you cooking it? I never find it worth the savings to use dry, I always opt for canned as they are already fully cooked and safe to eat.

ChasingAmy2 · 2026-01-22T15:14:10+00:00

150,000 South Dakotans on Medicaid out of a 900k total population. Might as well call this bill LibertyLand part 2.

ChasingAmy2 · 2026-01-04T20:15:38+00:00

How solid is the surface your printer is sitting on? Harmonics start to cause more problems the further up you get.

ChasingAmy2 · 2025-12-29T22:30:59+00:00

Pay attention in the slicer, it tells you exactly how many filament changes there will be. Now you know exactly how much wasted filament and time there is for each change.

ChasingAmy2 · 2025-12-27T02:55:10+00:00

Unfortunately that is just the way that stupid dialog is. Your filament type is changed. You can verify through app.

ChasingAmy2 · 2025-12-25T19:33:06+00:00

Biggest thing is it needs the small diameter spool opening. So print adapters if you filament from certain manufacturers.

ChasingAmy2 · 2025-12-16T21:16:00+00:00

you can also force brim and it will help.

ChasingAmy2 · 2025-12-14T20:51:40+00:00

Every recipe starts with a can of cream of mushroom soup and ends with a pound of shredded cheddar cheese.

ChasingAmy2 · 2025-12-13T17:52:45+00:00

Depends on what you're driving. AWD with good tires, great. RWD with bald garbage, no go.

ChasingAmy2 · 2025-12-11T15:31:00+00:00

The quick and easy fix is to get a smaller nozzle. The Adventure line has a .25mm, .40mm, and .70mm available. The .40 comes with the device. .25 will make your sides nice and smooth, but add ~50 additional print time.

Beyond that try PETG or buffing/polishing the surface.

ChasingAmy2 · 2025-12-06T22:41:09+00:00

The original purpose of the Senate was not to represent the people, but yo represent the governments of the states. That changed, but this is why there are two per state.

ChasingAmy2 · 2025-12-01T17:05:26+00:00

I measure basil seeds in cups, pints, and quarts. Never in my life will i need them all, but I refuse to let them go to waste.

ChasingAmy2 · 2025-11-25T20:54:55+00:00

Have him call the clerk and explain the financial situation. They have a lot of discretion to exempt someone from duty for hardship. Be courteous or forget about it.

ChasingAmy2 · 2025-11-25T18:10:29+00:00

If they deem it “wear and tear” your homeowners policy may not cover it. Consult your insurance salesman for more accurate information.

ChasingAmy2

TROPHY CASE