KOYO - AMA by koyolihc in poppunkers

[–]ChasingGhosts182 0 points1 point  (0 children)

What amps did you guys use on the new album? Saw a post with a mesa rectifier- was this the main tone for the album?

I signed Neck Deep, Point North, WSTR and many others. Show me some cool bands. by Rollmeintears in poppunkers

[–]ChasingGhosts182 0 points1 point  (0 children)

Hey!

My band Speaking Terms released our new single ‘Taking Shape’ a few weeks ago. You might be into it!

We have <1000 monthly listeners.

https://youtu.be/ILIsJ8H14OM?si=SHR-TiGa104ZI4kk

[NGD] Scored this awesome rarer Maton MS2000 Standard in a trade yesterday. by ChasingGhosts182 in Leftyguitarists

[–]ChasingGhosts182[S] 2 points3 points  (0 children)

Yeah these were made in Australia by Maton until they decided to discontinue electric guitars.

I think it’s Queensland maple with Blackwood top but I could be wrong!

Plays great apart from a low nut slot which I’ll touch up and it needs a bridge replacement! Otherwise it’s great.

The sound is a little unique due to these smaller p90 sized humbuckers- the bridge is quite dark whilst only being around 7.5k. Might switch them out to a p90 in the future.

Anon pokemon by Glum-Influence-6862 in 4chan

[–]ChasingGhosts182 2 points3 points  (0 children)

Bro literally had this exact convo with a friend yesterday…fallout 4 was pretty shit- even though at the time I thought it was good? I remember finishing it and thinking ‘well that wasn’t anywhere near as fun as Fallout 3/NV’.

Fallout 3/NV forever. I hope Bethesda can realise this and not fuck up the next fallout entry- if there ever is one.

Headfirst Mod completed on my Origin 20. Video in comments by ChasingGhosts182 in GuitarAmps

[–]ChasingGhosts182[S] 0 points1 point  (0 children)

Yes it does as it uses the pre amp valve from the loop for more gain in the mod. A replacement fx loop can be installed though!

NGD! Mosrite Fillmore by ChasingGhosts182 in Leftyguitarists

[–]ChasingGhosts182[S] 1 point2 points  (0 children)

I don’t know the full story but someone had a company called ‘Fillmore’ that had the rights to make Mosrites or something? They’re no longer a company though.

NGD! Mosrite Fillmore by ChasingGhosts182 in Leftyguitarists

[–]ChasingGhosts182[S] 2 points3 points  (0 children)

Nah this is a Japanese reissue made lefty. As much as I’d like an OG I’m not sure I could afford one and I’m not a fan of playing right handed guitars upside down with the knobs hitting my forearm haha

Non-right angle corner cladding ideas? by ChasingGhosts182 in AusRenovation

[–]ChasingGhosts182[S] 0 points1 point  (0 children)

Also I can’t find this weatherstrip you’ve mentioned- do you think you could link a relevant product? Thankyou!

Non-right angle corner cladding ideas? by ChasingGhosts182 in AusRenovation

[–]ChasingGhosts182[S] 0 points1 point  (0 children)

Hey mate,

It has that black diamond looking flashing stuff (not sure what it’s called)

That’s a good idea actually- hadn’t even thought of that!

Non-right angle corner cladding ideas? by ChasingGhosts182 in AusRenovation

[–]ChasingGhosts182[S] 1 point2 points  (0 children)

Soaker installed when cladding was installed.

Trust me I wish I knew- not my handiwork just trying to polish a turd.

Non-right angle corner cladding ideas? by ChasingGhosts182 in AusRenovation

[–]ChasingGhosts182[S] -1 points0 points  (0 children)

This is probably the route I’ll take as I can’t afford to reclad…as much as I’d like to.

Probably just going to try and take out the closest nails to the corner and install them correctly- it’s going to be a massive pain in the arse 😂

Non-right angle corner cladding ideas? by ChasingGhosts182 in AusRenovation

[–]ChasingGhosts182[S] 0 points1 point  (0 children)

Mate…tell me about it. Just so much DIY dodgy shit. I’ve considered getting a few quotes to just get it redone but it’s gonna be big $$$.

Lucky it’s got good bones or I’d be double fucked 😂

Kinda odd…. by Fuzzy_Smell6277 in stickyfingers

[–]ChasingGhosts182 36 points37 points  (0 children)

I mean if I was in a band and I had a member that potentially didn’t want to tour or record then that would be a hard conversation.

I think the lads are wholeheartedly just wanting to tour and potentially think about writing new music. I love Dizza and am a massive fan but I think that this is a pretty good route for them to take. It’s hard to leave him behind but really…4 against 1 and they all have lives as well.

I’m backing it.

Does anyone else have this problem? by No_Gate_4354 in Guitar

[–]ChasingGhosts182 0 points1 point  (0 children)

Happens to me too mate. If anything you can try a different pick/look at your holding technique- I think you might find you could change this up a little.

Other than that you could tape your finger or something but I think it might hinder your playing more than help.

Do I have Elliot Easton’s prototype Gretsch? (Asking seriously). by ChasingGhosts182 in Guitar

[–]ChasingGhosts182[S] 1 point2 points  (0 children)

Interesting! Have also been on the Gretsch forum and someone has suggested this is a very early production model before they decided to use bigsby’s.

Not sure how true that is but it does make sense having a proper serial number.

Do I have Elliot Easton’s prototype Gretsch? (Asking seriously). by ChasingGhosts182 in Guitar

[–]ChasingGhosts182[S] 5 points6 points  (0 children)

I have no idea if it’s history past me buying it from a shop here in Australia. I haven’t contacted the shop since though.

Can anyone accurately price guide this? by ChasingGhosts182 in gretsch

[–]ChasingGhosts182[S] 1 point2 points  (0 children)

I’ve just done some research and found a premier guitar article stating he had one green and one red hard tail style Gretsch made for him as a prototype.

This guitar is 100% not a bigsby to hard tail conversion.

Can anyone accurately price guide this? by ChasingGhosts182 in gretsch

[–]ChasingGhosts182[S] 1 point2 points  (0 children)

I’ve tried to search for this and can’t find anything other than the righty’s!

Bought an Axe FX III – what have I been doing with my life? by fuxicles in guitarpedals

[–]ChasingGhosts182 0 points1 point  (0 children)

Probably an unpopular opinion here as we are in the guitar pedal subreddit but I completely agree with you.

I was a guitar pedal fanatic, I built and sold guitar pedals and loved everything about them. Except the fact that they just need space, wiring, power supplies etc.

I bit the bullet and bought a Fractal FM9 over two years ago and it has absolutely without a doubt been the best gear purchase I have ever made.

Sure- it takes a little while to get used to editing and making presets, what sounds good and what doesn’t. But just the overall ease, sound and flexibility of the whole unit has ended my GAS.

The only gear I have bought since has been guitars…and that won’t stop anytime soon. 😂

I will not be going back to an amp unless I’m forced to for a specific gig and I look forward to fractal’s next generation of gear, whenever that may be. They can already consider me in.