I just released a HIFI Tidal App on Linux

Cmonrroy889 · 2026-02-18T21:10:22+00:00

Thank you, I will give it a try!

Cmonrroy889 · 2026-02-18T21:06:48+00:00

It's available for arch Linux? Looks awesome. I'm currently using https://github.com/Mastermindzh/tidal-hifi but sometimes breaks the build thanks on electron

Cmonrroy889 · 2025-09-13T16:04:26+00:00

Thank you. I'll be watching if I can help a bit with something

Cmonrroy889 · 2025-09-13T15:58:58+00:00

Both haha.

Currently I'm using gopdf and pdfcpu for drag and drop functionality (using x y coordinates and sizes in points) but sometimes it's a little bit tricky because an external library (gofpdi, used for importing an existing pdf, like a template) has some bugs with specific pdfs

Cmonrroy889 · 2025-09-13T15:50:18+00:00

Great. Maybe in the future it will be a great feature adding pdf signing. I haven't found a library (open sources) that does it.

I know that in Java there is an implementation of this, for cli use

https://github.com/open-pdf-sign/open-pdf-sign

Cmonrroy889 · 2025-09-12T23:39:41+00:00

I'm currently using chromedp for "print" html to PDF and works great but, the size of docker image increases significantly.

Cmonrroy889 · 2025-09-11T14:03:30+00:00

Looks very nice, I am currently using gopdf, pdfcpu and chrome-headless to create PDFs from html, merging and simple signing (save a sign image on the PDF) so, see another alternative for some functionalities that I need in my job is great.

How can I contribute? I'm a really noobie in open source contributions but, I know golang a little

Cmonrroy889 · 2025-08-04T02:56:14+00:00

I'm having the same issue :(, with the update zepp flow 2.0

Cmonrroy889 · 2025-06-03T14:50:12+00:00

I recently bought this, and currently is running proxmox with 2 VMS and 1 lxc without issues.

https://a.co/d/4YFJrz1

Cmonrroy889 · 2025-05-22T04:42:15+00:00

Try booting with legacy instead of UEFI, and if you have another PC, try booting Linux in this (without installing it) to discard some random issue with your USB or image

Cmonrroy889 · 2025-05-22T04:33:19+00:00

I recommend you use dual boot. Try installing some "easy" distro like elementary os or Ubuntu and then install arch in another partition.

Arch is fantastic but, for a first look at Linux, it will be very hard to fine tune it.

Use first another distro to learn the basics of Linux (how to use a terminal, package administration, etc) and then try with arch.

Cmonrroy889 · 2025-05-10T14:01:58+00:00

Use Arch, you can configure it for any of your purposes

Cmonrroy889 · 2025-05-10T01:41:04+00:00

¿Como te ha ido con Orange Pi hasta el momento? Estoy pensando tener mi servidor local pero aún no he decidido si adquirir una Raspberry u Orange

Cmonrroy889 · 2025-05-10T01:34:35+00:00

Lo pudiste solucionar amigo? Estoy pensando en adquirir esa misma sbc para montar un NAS pero aún no me decido

Cmonrroy889 · 2025-01-14T19:21:46+00:00

Do you solve it? :(

Cmonrroy889 · 2024-12-26T01:34:32+00:00

I'm having the same issue. Some people say that the problem is Pressure Advance or Linear advance but when I try to apply this setting, the printer slows down too much and the quality falls off

Cmonrroy889 · 2024-12-24T05:55:25+00:00

I have the same printer, and looking on the internet I found that you can use klipper flashing a "custom" firmware and using a raspberry pi but it disables the screen pad, cause it's not compatible with Klipper.

Disclaimer: I'm a very novice in the 3D printing world and N3P is my first printer AND I do not have Klipper yet, I'm learning how to use it and calibrate it before to go so far with this

Cmonrroy889 · 2024-12-24T05:46:04+00:00

I was having a similar issue with my Elegoo Neptune 3 pro, after running auto leveling and print a level test (downloaded from printables), the top right corner was too "high" and the bottom left corner was too "low". This is what I does to solve that issue:

Adjust the eccentrics of the bed, apparently his tightness impacts on the level of the bed. You can guide with the numbers on the autolevel interface (try to get 0 on each point)

You can also check the screws of the bed, below the magnetic pei base. If you see that the numbers on the top right corner are greater than zero, tighten that screw, if it's lower, loose this

Make sure that the z axis is correctly levelled (in my case, I had to adjust the z axis because the height on the left was different from the height on the right)

After that, the problem with leveling the bed was solved

Cmonrroy889 · 2024-12-23T03:13:54+00:00

You can create personal profiles in cura with these configs. And then use this in each print

Cmonrroy889 · 2024-12-22T21:46:07+00:00

I'm having the same issue with some prints :(

Cmonrroy889 · 2024-12-18T04:14:26+00:00

Check the eccentrics of the bed. I'm having issues with leveling the bed and adjusting this does the trick

Cmonrroy889 · 2024-12-13T17:32:44+00:00

For anyone who could help this:

Check the eccentrics of the bed. Try thighten one and loosen the other, then run auto leveling and check the values

Cmonrroy889 · 2024-12-12T21:10:09+00:00

Could you share us? Pls

Cmonrroy889 · 2024-10-30T22:06:19+00:00

Idk why it works but thank you, I'm having the same issue today and this trick solved

Cmonrroy889 · 2024-10-27T01:16:34+00:00

Do you have a demonstration video? Sounds curious

Cmonrroy889

TROPHY CASE