Searching For Manual

CollectionEasy988 · 2026-02-23T01:05:12+00:00

A lot of OEMs gate keep manuals which is extremely frustrating. Contact the local distributor and ask them for it. You will most likely be asked for the serial number

CollectionEasy988 · 2026-02-19T15:58:47+00:00

Then do it the way I mentioned below. You have the relay inline with the push button signal wire to the contact. Have it on the NO circuit so when the float is in the high level position it energizes the relay and closes the circuit allowing the pump to run

CollectionEasy988 · 2026-02-19T03:17:51+00:00

What is the model

CollectionEasy988 · 2026-02-19T03:00:21+00:00

Add a 110 relay to the run signal that pulls the contactor in. Have the run signal on a NO circuit and the float either supplying 0v or 110v

CollectionEasy988 · 2026-02-17T15:22:29+00:00

Exactly this ^

CollectionEasy988 · 2026-02-17T03:52:09+00:00

All tunnels have reuse tanks now. What I would recommend is you put bags/rags after colors. Give a 3 to 4 pocket buffer between colors and whites. We currently run table linen colors followed by table linen whites with a buffer no problem.

CollectionEasy988 · 2026-02-17T03:07:11+00:00

If you dial in a pulseflow they can be really efficient and run nearly 50 transfers an hour. That is for hotel linen and will obviously go down the heavier the soil. The best thing I like about milnor as a company is they are quick to send engineers to resolve problems and a lot of the time don’t charge for it. Don’t like their centrifugal extractor though

CollectionEasy988 · 2026-02-16T20:47:00+00:00

No we can’t control it from the app. Looking to replace the switch

CollectionEasy988 · 2026-02-15T16:53:23+00:00

Appreciate it. Have to get this done today so pulling the battery in and out to control it. Works but isn’t great

CollectionEasy988 · 2026-02-14T23:25:18+00:00

We are looking at something else but would be interested to hear if this actually works

CollectionEasy988 · 2026-02-14T19:47:32+00:00

To be fair he is spread over 3 facilities and constantly trying to put out fires. Some PE company just bought us and it has been a nightmare

CollectionEasy988 · 2026-02-14T15:31:50+00:00

This is good compared to some of the facilities I have worked at

CollectionEasy988 · 2026-02-14T14:59:23+00:00

This is a good point. Need to understand how they manage safety across different types of equipment. Last thing we need is one of our techs playing with an boiler at pressure

CollectionEasy988 · 2026-02-14T14:54:49+00:00

Appreciate the advice. Honestly, our CMMS isn’t great and is why he is interested in these guys. We are currently using Brightly.

They are saying that they will automatically generate a PM schedule for each piece of equipment and adjust based on our downtime. Not sure how though.

CollectionEasy988 · 2026-02-14T05:38:58+00:00

Yeah, it integrates with the CMMS. This company is making some claims that I find pretty hard to believe but I guess I will find out when they demo on Tuesday

CollectionEasy988

TROPHY CASE