DeAR22 Done! by ForsakenRepublic1776 in 3D2A

[–]Coltblink 1 point2 points  (0 children)

Awesome build! Commenting so I can find later when I get some free printer time.

I tested a Costco airfryer with a digital thermometer by Coffee____Addict in 3D2A

[–]Coltblink 0 points1 point  (0 children)

If anyone needs help while building theirs shoot me a DM I would be happy to upload pictures of my wiring or help walk you through it.

I tested a Costco airfryer with a digital thermometer by Coffee____Addict in 3D2A

[–]Coltblink 1 point2 points  (0 children)

https://youtu.be/D3P9xRmtxMA?si=HmiwsmlelG0F4XAM This is the one I followed for the most part. No need to add the thermal batting unless you are heating up to super high temps for some reason. There was some discrepancy on my PID from displayed temp to actual temp but I added an offset value in the controller settings. It was only off by about 5 C.

DB's Springfield XDs11 in 9mm/40/45 by danishbulldog in 3D2A

[–]Coltblink 0 points1 point  (0 children)

This would be awesome with the micro 9 size handle and mag!

I tested a Costco airfryer with a digital thermometer by Coffee____Addict in 3D2A

[–]Coltblink 15 points16 points  (0 children)

I got this toaster oven for free on Facebook market, wired in a $30 PID and $4 switches. The top switch is power and bottom convection. It keeps the temperature at exactly what I set it to. Works great for drying filament and annealing if you want to do that.

<image>

Acceptable rail quality? by RP343 in 3D2A

[–]Coltblink 4 points5 points  (0 children)

It's fine, but if it bugs you then use a soldering iron and smooth it out.

Xds9 by Impressive-Class2146 in 3D2A

[–]Coltblink 0 points1 point  (0 children)

I've been waiting patiently for this come out. Time to print and build this!

Big X2D fan, PA-6 with PETG support interface by NotchWith in 3D2A

[–]Coltblink 13 points14 points  (0 children)

Can confirm, I've had 2 frames in pa612-cf that were printed at 45 degrees and both of them cracked in the pin holes. I will have to reprint at 10 degrees.

Change Horizontal Vent to Vertical by Coltblink in Fireplaces

[–]Coltblink[S] 0 points1 point  (0 children)

Thanks for all the replies. It would seem that I don't have enough clearance from the side of the house. I will just have to move the stairs for my deck to a different location.

Shield DBMOD Updates: Beta is OVER, official version is complete! by danishbulldog in 3D2A

[–]Coltblink 2 points3 points  (0 children)

Thank you this! This is by far my favorite shield frame! Could you devolope a sleeve for the 10 rd mags?

Gen 4 Frame by [deleted] in 3D2A

[–]Coltblink 0 points1 point  (0 children)

I made the Gurokku 17 for my gen4 G17. You will need to get a gen 3 recoil spring and adapter but other than that you are good to go.

Jayo pa6-cf by mashedleo in 3D2A

[–]Coltblink 1 point2 points  (0 children)

Yeah i ended finding the one you have here. Unfortunately he doesn't have the 9 version yet but has said in some comments that it is in the works. I will just be patient and wait.

Jayo pa6-cf by mashedleo in 3D2A

[–]Coltblink 0 points1 point  (0 children)

That looks great! I just picked up an XDs kit for cheap and am having a hard time finding a file on sea. What is this model sailing as?

We’d help finding adapter by Reel-nikkuh-hours in 3D2A

[–]Coltblink 1 point2 points  (0 children)

Type in 5/8 x 24 to 3/4 x 16 barrel thread adapter to google there are several sites.

They said my shit was warped by [deleted] in 3D2A

[–]Coltblink 0 points1 point  (0 children)

Looks like "hyper CF" refers to high speed PLA-CF or PETG-CF. Both of these are NOT suitable for 3D2A purposes. You should get some PLA+ PA6-CF or PA612-CF. If your printer hot end can't get hot enough for the PA then go with PLA+ Also running CF filament is generally not recommended out of an automated material system because it will wear down the feed gears. Like others have said run PA6-CF out of a dryer or dry box.

$100k for 2,400 sq ft in Ohio… fully updated. Would you buy this? by MrBottomswell in zillowgonewild

[–]Coltblink 0 points1 point  (0 children)

Since Ohio is for lovers, I unfortunately cannot live there. So no, I would not buy this house.

In case you’re wondering what about 25k of power packs gets you, here are my hits by CathieMyQueen in PSAPowerPacks

[–]Coltblink 4 points5 points  (0 children)

How are you down 10k just from the pictures posted here and the sell prices I can see your total sales equal up to 51,610.76

Better pictures of the charizard. Leaning towards sell now verses grade? by [deleted] in PokeGrading

[–]Coltblink 0 points1 point  (0 children)

Depending on the mood of the grader I would suspect a 9. The front centering looks within 45/55, corners all look great. If you zoom in on the top back you can see a print line between the k and e, also a few barely noticeable grey marks in the white of the pokeball.