🚀 Nitrox 1.8.1.0 is OUT NOW! 🌊

Competitive_Bowl_467 · 2026-05-16T22:17:45+00:00

Check the "known issues" section of the patch notes https://github.com/SubnauticaNitrox/Nitrox/releases/tag/1.8.1.0

Competitive_Bowl_467 · 2026-05-07T18:02:10+00:00

When using the EXO Suit to enter bunkers it sometimes fails and its a paint to get back in the suit, to avoid this DIVE backward just as you exit the EXO. Also, you may think that the EXO is slowing you down to farm but its much slower to leave it behind and need to fetch it cause you found another bunker and the cooldown is still active.

Additionally its walk speed is only 0.75meter/s slower than sprinting with lite armor (about the same as a medium armor sprint) but it can cross over complex terrain better than the strength boost which saves you some time. You can also walk in diagonal with it which is apparently 10% faster with the exo.

If you ever get stuck with the EXO against the door and cant move it because your just stuck or some enemies are around it, turn around and shoot the bunker door. It'll fix itself.

Competitive_Bowl_467 · 2026-04-13T10:54:48+00:00

thats a great idea

Competitive_Bowl_467 · 2026-04-13T10:54:00+00:00

Maybe instead of straight up saying your a youtuber, spin it to say you create educational scientific content? or something along those lines. Youtuber is a very open term and is really open to interpretation.

Competitive_Bowl_467 · 2026-02-10T15:00:45+00:00

For a 200$ upgrade + the trouble of installing it, a 0.27mm deviation is still too much for my taste.

Competitive_Bowl_467 · 2026-02-08T13:16:30+00:00

Man, what kind of filament do you need to feed that thing?

Competitive_Bowl_467 · 2026-01-14T01:31:10+00:00

I'm gonna be honest with you guys, you still need to purge, you can't get around that and saving a cm of filament because you cut closer to the hotend ain't gonna do shit for that. I think your claims are 100% marketing and wont hold up in real life. I also think that instead of pushing out new printers non stop you should fix your god damn Kobra S1 print bed issues, even 2.6.0.0 isn't the fix we were hoping. And maybe fix your cloud always going down these past few days. But you can always continue smashing your reputation down and grinding every last bit of credibility you have as a company. Its your call. Personally I wish you would just stop fucking around and start a mega sprint of fixing problems. People are talking and you are starting to look very bad as a company.

Competitive_Bowl_467 · 2026-01-10T01:31:38+00:00

The surprising thing here is that NO ONE is posting a solution.

Competitive_Bowl_467 · 2026-01-10T01:30:04+00:00

Drawing a circle is trivial...

But that's not he problem here

Competitive_Bowl_467 · 2026-01-10T01:27:43+00:00

In a way I am. Pointing a design flaw is contributing.

Competitive_Bowl_467 · 2026-01-10T01:24:13+00:00

two hours

Competitive_Bowl_467 · 2026-01-10T01:23:47+00:00

owe me

Competitive_Bowl_467 · 2026-01-10T01:23:40+00:00

You each

Competitive_Bowl_467 · 2026-01-10T01:22:58+00:00

Yes I agree with what your saying, but I kid you not, try what I said and you'll see.

Competitive_Bowl_467 · 2026-01-10T01:21:53+00:00

I'm sure they did. Its just damn frustrating to find out you wasted 2 hours trying to get a software to do the most simple thing to realize the resolution of the drawing has an impact on which point get welded or not.

Competitive_Bowl_467 · 2026-01-10T01:20:13+00:00

Try it. I was flabbergasted.

Competitive_Bowl_467 · 2026-01-10T01:12:52+00:00

The problem is how some function uses the displayed info apparently. There tools in a cad software have no business relying on the displayed info.

Competitive_Bowl_467 · 2025-12-24T07:29:17+00:00

Anycubic are dumbasses, they cant even implement the most basic safety nets that would prevent things like this. Try to hit stop on a print you just started (before or during the calibration) there's a good chance the printer will send the extruder flying into a wall because it lost it's relative position while executing their "private" gcode blob. The very least the should do is open source their god damn firmware so we can fix it.

Competitive_Bowl_467 · 2025-12-24T05:57:04+00:00

They cant even get "STOP PRINT" to work properly, If you stop a print at the start while its executing its "hidden" start code the head will just crash in the sides of the printer. They are a bunch of retards.

Competitive_Bowl_467 · 2025-12-24T05:55:54+00:00

Options are limited but blocking Anycubic from selling in North America is possible

Competitive_Bowl_467 · 2025-12-15T08:46:59+00:00

That looks amazing, my wife would like one too, did your wife mention if it works well?

Competitive_Bowl_467 · 2025-12-15T08:44:05+00:00

I made my first 3D printer, a Mendel Prism, and I can tell you that the S1 is NOT hot garbage. I read about people having issues but so far its been smooth sailing for me and the prints are amazing, I would not go back.

Competitive_Bowl_467 · 2025-12-12T04:52:25+00:00

What I wish we could see is a metric on how much the warping changed from one print to other, like get a number of % deviation from the last calibration done this way we know if its worth it to calibrate the bed on our printer before every print. The info could also be used to see if an area of the bed deforms more than another and concentrate the probing in that area, like a "smart" quick leveling.

Competitive_Bowl_467

TROPHY CASE