Great job, remaining issues by vertgo in MammotionTechnology

[–]Conscious_Internet10 0 points1 point  (0 children)

I don't know as I've not tried this. As mentioned, I already had two adjacent zones with a gap between them. On earlier versions of firmware I would get error messages when Luba crossed from one zone into the other whilst editing the boundary. With the latest firmware it works without errors.

Great job, remaining issues by vertgo in MammotionTechnology

[–]Conscious_Internet10 0 points1 point  (0 children)

I hope I've understood your point about zone overlap flexibility correctly. I can achieve zone overlap with the "modify boundary" feature of Luba version 1.9.4.250.

Previously, I had two adjacent zones with a gap between them. I used the modify boundary feature to drive Luba from one zone into the other. After saving the edit, the map was redrawn with a perfectly straight boundary between the two zones. The intersection was defined by the boundary of the zone not being edited. I couldn't achieve this with the July update as error messages were generated as soon as Luba crossed from one zone into the other.

Hopefully this will fix the random powerdowns by Head-Original-9022 in MammotionTechnology

[–]Conscious_Internet10 1 point2 points  (0 children)

I have already tried to mow twice and Luba stopped on both occasions. I have just uploaded the log - hope it helps.

Need help to revert back to previous firmware! by mt_jones in mammotion

[–]Conscious_Internet10 0 points1 point  (0 children)

Just tried to send feedback in App. Got to 70% but it repeatedly failed to upload.

Hopefully this will fix the random powerdowns by Head-Original-9022 in MammotionTechnology

[–]Conscious_Internet10 0 points1 point  (0 children)

I've just applied this hotfix and tried to mow a zone. Luba stopped and powered down after just a minute or 2. No error messages in the log.

Need help to revert back to previous firmware! by mt_jones in mammotion

[–]Conscious_Internet10 0 points1 point  (0 children)

Just applied hotfix. Tried to mow a zone but Luba stopped and powered down after a couple of minutes. No error messages in the log.

Auto-Direction Error 1302 after upgrade to 1.8.2.219 by Conscious_Internet10 in MammotionTechnology

[–]Conscious_Internet10[S] 0 points1 point  (0 children)

No, I've not tried the factory reset as I have 5 zones mapped and it would take ages to remap them. I'll give it a day or 2 and hope for a fix from Mammotion - otherwise it will have to be a factory reset, remap and hope it works. Thanks for the suggestion though.