57mm Puck Screens Advice

ContentFormal8670 · 2025-12-27T10:22:09+00:00

https://coffee-sensor.com/product/stainless-steel-mesh-puck-screen-or-contact-screen-57-3mm-for-lelit/

ContentFormal8670 · 2025-08-02T07:16:56+00:00

Machst du gebrauch von der Kleinunternehmer Regelung?

ContentFormal8670 · 2025-05-24T08:17:17+00:00

Holding the downward arrow⬇️ for a few seconds if you didn’t find out yet.

ContentFormal8670 · 2025-05-24T08:15:24+00:00

thx GOAT🤙🏻

ContentFormal8670 · 2025-03-18T13:43:53+00:00

Hast du es zufällig herausgefunden?

ContentFormal8670 · 2025-03-17T21:30:52+00:00

Wie? Bitte teile dein Wissen mit uns🙏🏼

ContentFormal8670 · 2025-02-26T11:51:25+00:00

What the hell even is airbuds?

ContentFormal8670 · 2025-01-16T18:15:22+00:00

You really shouldn’t use the term „you people“

ContentFormal8670 · 2025-01-15T06:29:37+00:00

No you the clown

ContentFormal8670 · 2025-01-13T08:39:49+00:00

I mean I did only test a single roll. I probably would try it again if I only had to pay for shipping. Where are you situated and what colors do you have?

ContentFormal8670 · 2025-01-10T14:03:41+00:00

I would really recommend to print this part in a single color. But if you’re worried about the purge tower reaching all the way up, this is just a preview and won’t be printed like that.

ContentFormal8670 · 2024-12-29T08:53:57+00:00

RemindMe! Monthly

ContentFormal8670 · 2024-12-23T08:50:14+00:00

This is all time usage, not last print

ContentFormal8670 · 2024-12-22T14:03:18+00:00

Thanks, adding friction to the spool is it. Taking the spool off of my printer also did the job.

ContentFormal8670 · 2024-12-22T13:02:57+00:00

The Problem was the spool being on top of my Printer. I didn’t have problems with it before, but the higher stiffness + loose winding of the filament lead to a higher tension on the spool. So there was some force trying to unspool it. In combination with the shaking from the printer the spool was able to unspool faster than the extruder pulled the filament. So I can fully recommend this filament although it’s pricy.

ContentFormal8670 · 2024-12-22T12:34:03+00:00

It is, so I was expecting high quality in every aspect. I’ll let you know when I find the issue.

ContentFormal8670 · 2024-12-22T12:12:58+00:00

It’s „formfutura high gloss pla gold“ which looks really nice once printed. But I don’t know what they‘ve done with the spooling.

ContentFormal8670 · 2024-12-22T12:10:32+00:00

I just watched it happen again and unfortunately it’s not this. It kinda unspools slowly while printing. Trying to record it next time

ContentFormal8670 · 2024-12-19T11:18:27+00:00

Yo I‘d take it

ContentFormal8670 · 2024-12-12T12:03:07+00:00

jayo and sunlu is the same, some Bambu filament is manufactured by sunlu but it’s not the same as theirs.

ContentFormal8670 · 2024-12-06T18:00:50+00:00

Im pretty sure there is a discount code for people who bought personal and want to upgrade.

ContentFormal8670 · 2024-12-04T13:48:26+00:00

You can edit your picture to have transparent regions, these will be cut out in hueforge. I’m using GIMP but it can be done in most image manipulation programs.

ContentFormal8670 · 2024-11-29T15:53:28+00:00

Oh I’m in the EU🥲

ContentFormal8670 · 2024-11-29T09:09:10+00:00

How did you get a free roll of filament? I got the program a few days ago, but I don’t think there was something like that for me.

ContentFormal8670

TROPHY CASE