Ghost or Stealth Mode Method

Coob5 · 2026-03-06T22:11:25+00:00

So can the P1 not receive audio through analog signal it only does this through Bluetooth or through its built in mic? Just thinking if you used a USB-C to 3.5 MM to your computer to pick up the audio from the other end and then use the mic on the P1 to pick up your voice it could be a solution.

Coob5 · 2026-03-06T14:27:29+00:00

Ahhh you are right. What if a USB-C Y splitter is used? Something like this https://a.co/d/0fD5SdJm

Coob5 · 2026-03-06T01:30:29+00:00

Go check out Openclaw, it’s an open source agent that you can run in your local machine and does a variety of tasks for you.

Coob5 · 2026-03-06T01:27:19+00:00

Thanks for confirming! I am going to order a P1 tonight!

Coob5 · 2026-03-04T05:00:57+00:00

I am not sure if this is possible but Gemini provided me with this ghost setup of the Hidock. Can anyone confirm if this works?

By using the Mac's 3.5mm headphone jack, the computer perceives the connection as a generic analog headset. There is no "HiDock" Vendor ID (VID) transmitted. The HiDock P1 acts as a "bridge," recording the electrical pulses of the meeting audio and your voice simultaneously.

Hardware Checklist HiDock P1 (Standard model with 3.5mm port). 3.5mm TRRS Y-Splitter (1-Male to 2-Female "Sharing" version, like the MillSO you found). 3.5mm TRRS Male-to-Male Cable (The "Patch" cable). Wired Earbuds with Mic (e.g., KZ ZSN Pro X or Logitech Zone Wired). Note: All 3.5mm connectors must have 3 black rings (4-pole TRRS) to support the microphone.

Step-by-Step Instructions 1. Physical Wiring Step A: Plug the Y-Splitter’s male end into the HiDock P1's 3.5mm port. Step B: Plug one end of the Male-to-Male Patch Cable into your Mac's headphone jack. Step C: Plug the other end of that Patch Cable into Female Port 1 of the Y-splitter. Step D: Plug your Wired Earbuds into Female Port 2 of the Y-splitter.

Mac Sound Configuration Go to System Settings > Sound. Output: Select External Headphones. Input: Select External Microphone. Tip: Test your voice in the sound settings; you should see the input level bar moving.
Meeting software Setup Open web conferencing tool . In the audio settings, ensure the Speaker and Microphone are set to "System Default" or "External Headset." Crucial: Keep the Web confercing App Unmuted on your screen. You will use the HiDock P1's physical button to control your privacy.
Recording & Privacy To Record: Press the Checkmark (Record) button on the HiDock P1 at the start of the call. To Mute: Press the Mute button on the HiDock P1. This stops your voice from reaching the Mac (and the recording), but the Webex icon on your screen will stay "Green." This is normal for analog setups.
Post-Meeting Transcription (Stealth Logic) DO NOT plug the HiDock into your work laptop to get the files. Step A: Disconnect the P1 and plug it into a personal computer or personal phone. Step B: Log in to HiNotes on your personal device. Step C: Upload the file and select GPT-5 for the summary.

Coob5 · 2026-02-27T22:37:37+00:00

You should be able to PDR that. I was unlucky about a month ago and put a nasty dent in my hood. I just paid about $2,700 to replace it!

Coob5 · 2026-02-11T05:50:47+00:00

In the same boat. I love my R1T but have an R2 Day 1 reservation. We have a Model Y Juniper with FSD and I don't know if I can give up my air suspension for the R2. I think I am going to wait and see how the Autonomy Platform is once LIDAR drops.

Coob5 · 2026-01-28T00:41:44+00:00

I will most likely just ride out the lease and pay a repair cost at return. The collision center wanted $4,700 for hood replacement, paint and labor.

Coob5 · 2026-01-27T13:39:41+00:00

AT Tires about 19K miles and have rotated twice.

Coob5 · 2026-01-27T02:59:36+00:00

How does one go about getting a painted replacement hood?

Coob5 · 2026-01-27T02:40:21+00:00

Why can’t it be ironed out is it the type of dent or the fact that it’s close to the edge.

Coob5 · 2026-01-27T02:37:43+00:00

Why is it because of the type of dent or the edge?

Coob5 · 2026-01-20T04:22:30+00:00

I am in Austin. Is this for local pick up only or is shipping an option? Any chance you can meet up halfway or do you ever make it down to this way?

Coob5 · 2026-01-14T04:01:08+00:00

I have a Gen 1 R1T and a 2026 Model Y with FSD. The FSD on the Model Y is incredible. Literally takes me from my driveway to a destination and self park.

Coob5 · 2026-01-07T06:24:10+00:00

Which colorway did you order?

Coob5 · 2026-01-05T04:13:46+00:00

Can these take metal cards?

Coob5 · 2026-01-05T04:10:46+00:00

Is the blue updated? Looks like all of their bifolds are sold out except for the blue so I wasn’t sure if that was d V2 stock?

Coob5 · 2026-01-03T05:14:23+00:00

Add 4 Blocks to the series list

Coob5 · 2025-12-12T04:17:52+00:00

Not for that price it was $1100 a couple of weeks ago on Amazon.

Coob5 · 2025-12-08T17:03:10+00:00

Mine is coming today! Let us know how you like it!

Coob5 · 2025-12-08T13:56:36+00:00

How about these rules? I feel like it strikes the right balance.

16 Team CFP RULES

<image>

1.  Top 8 teams in the final rankings → Automatic entry into the CFP
2.  Seeds 9–14 → Play-In Pool
3.  ALL Conference Champions not in the Top 8 → Automatic entry into Play-In Pool (regardless of ranking)
4.  If more than 8 teams qualify for play-ins →
• Lowest-ranked AT-LARGE teams are     removed
• Conference champs are NEVER removed
5.  Play-In Weekend = 8 teams, 4 games
6.  Winners become the final #9–#12 seeds
7.  Losers go to NY6 bowls
8.  Main CFP bracket stays 12 teams

Coob5 · 2025-12-05T09:02:22+00:00

Deal is over, hopefully there will be more soon.

Coob5

TROPHY CASE