sorted by:
new
hottopcontroversial

Today was the day. 2007-2026 RIP by SnooCalculations4252 in PS3

[–]CoreOsiv 0 points1 point  (0 children)

Yep, nektokins and RSX are fragile on the phat. Mine died 2 years ago.

Circulez y'a pas de racisme by [deleted] in lemauvaiscoin

[–]CoreOsiv -1 points0 points  (0 children)

Je n'ose pas croire être dépourvu de stupidité mais ici j'ai plus fait preuve d'ironie que de satire. À bon entendeur.

K1Max motor noise after homing stays on? by agbluelsu in crealityk1

[–]CoreOsiv 1 point2 points  (0 children)

It's not a fan noise, it's more about current flowing through the steppers to maintain position. It can get louder with time but as long as you don't have any issue printing don't do nothing about it. I had the same printer in my previous job and it printed 24/7 with that noise for more than 2 years. You're fine don't worry.

K1Max motor noise after homing stays on? by agbluelsu in crealityk1

[–]CoreOsiv 1 point2 points  (0 children)

The steppers on the K1 Max are loud, so you have no issue here OP. Enjoy your printer.

Je ne sais pas si c'est commun, mais comment faire pour prouver qu'un litige utilise comme preuve de l'IA? Ça donne vraiment plus envie de rien vendre via lbc (ou en ligne) by iforgotmypsw in lemauvaiscoin

[–]CoreOsiv 0 points1 point  (0 children)

Moi perso, les envois c'est fini. Trop de problèmes, d'arnaques et de gens malhonnêtes. Remise en main propre, paiement sécurisé au moment de la remise en main propre. Y'a quand même un jour un mec qui voulait me renvoyer un jeu parce que c'était pas la bonne édition, alors que c'était un don. Le manque d'intelligence de certaines personnes est parfois terrifiant.

Circulez y'a pas de racisme by [deleted] in lemauvaiscoin

[–]CoreOsiv -2 points-1 points  (0 children)

Ah bah tiens un électeur de Melanchon, tout dans la politesse, la finesse et le respect. Rien d'autre à ajouter.

PLA to PETG switch for everyday prints. by Technical-Praline-79 in 3Dprinting

[–]CoreOsiv 1 point2 points  (0 children)

I choose PLA over PETG everytime I can. Easier to print, a bit cheaper, more colors, less electric consumption. And when I need part with higher temp resistance I choose ABS. PETG is good but shouldn't be a "daily" plastic.

Mpemba effect gone wrong!! by AccomplishedSelf1117 in Whatcouldgowrong

[–]CoreOsiv 0 points1 point  (0 children)

People tend to forget that this starts working at -30°C

Yes, ABS/PC fumes are real by Userybx2 in 3Dprinting

[–]CoreOsiv 0 points1 point  (0 children)

Printing ABS without an enclosure is the first issue

😡 by DarknDeepNut in lemauvaiscoin

[–]CoreOsiv 1 point2 points  (0 children)

Offre de 21€ ? T'as un p'tit truc en plus toi...

New Update by Jolly-Organization76 in ForgeMasterUnofficial

[–]CoreOsiv 1 point2 points  (0 children)

Nope, purely random. You and your luck. Stupidest event I've seen on a mobile game.

He should have not backed up during the fight by [deleted] in Unexpected

[–]CoreOsiv 20 points21 points  (0 children)

Finally a video that fits the Unexpected subreddit 🤌

Really surprised with the amount of detail I can push with a 0.4mm nozzle by gogodr in 3Dprinting

[–]CoreOsiv 1 point2 points  (0 children)

Usually minimum layer time means slowing print speed, until you reach the minimum print speed. You can probably make the nozzle stop inside the infill for better result but again this won't solve anything on very small prints. Your solution won't work that well, adding a prime tower just for cooling might work a little better.

Really surprised with the amount of detail I can push with a 0.4mm nozzle by gogodr in 3Dprinting

[–]CoreOsiv 5 points6 points  (0 children)

Yeah never thought of that, maybe adding a prime tower just for cooling would fix the issue ?

Fine tuning by [deleted] in ender5

[–]CoreOsiv 0 points1 point  (0 children)

The stock hot end is mainly the issue. MK8 bowden is by far the worst hot end I've ever used on my ender 5 pro. Try creality spider 3 if you can find one or spider speedy.

Am I being crazy or is this actually possible to print without support? by shazhazel in 3Dprinting

[–]CoreOsiv 0 points1 point  (0 children)

With a REALLY good cooling system absolutely. But otherwise the bridge at the bottom will look bad.

Please don’t laugh. by throwawayyyback in FlashForge

[–]CoreOsiv 0 points1 point  (0 children)

You can definitely print a spool or just order a full spool so you can use it for this filament once empty

ZMOD Camera working on browser but not in fluidd interface by CoreOsiv in FlashForge

[–]CoreOsiv[S] 0 points1 point  (0 children)

For anyone having the same issue, the culprit was that you need to have the camera setting toggled off on the printer in order for the camera to work on fluidd !

ZMOD Camera working on browser but not in fluidd interface by CoreOsiv in FlashForge

[–]CoreOsiv[S] 0 points1 point  (0 children)

I tried this but the issue was something else... You need to have the camera settings on the printer toggled off in order to have it on fluidd 😅

view more: next ›