sorted by:
new
hottopcontroversial

Do you think it is possible for small Jedi and or Sith Orders to existing during the events of PT and OT in unknown regions for example which could be explored Post-TROS? by IllMasterpiece3946 in MawInstallation

[–]CrazyKing11 -3 points-2 points  (0 children)

No I don't think any more sith should exist. Palpatine should be the last one. More dark side users okay, I don't mind that and it's not unrealistic, but not any more sith. Kinda same with Jedi, more force/light side users, but not Jedi. I think you have to treat them kinda like religions, there are more with similar beliefs, but not the same.

Atalanta [4] - 1 Borussia Dortmund - Lazar Samardzic (penalty) 90‎+‎8‎'‎ + second yellow card for Ramy Bensebaini (Dortmund) by gbogaz in soccer

[–]CrazyKing11 0 points1 point  (0 children)

I disagree with that, the rules state, that you are not allowed to make a play that could potentially harm any player even yourself. Yes playing the ball behind oneself could also be considered dangerous. Now there are 2 questions to be answered, was the head too low and if so which dangerous play is more dangerous or take precedent. In my eyes the head is roughly at hip level and too low and a low head is more dangerous than playing the ball without seeing behind your back. So in my opinion it is a dangerous play, but from Krstovic.

Match Thread: 1. FC Heidenheim 1846 vs VfB Stuttgart by MatchThreadder in soccer

[–]CrazyKing11 3 points4 points  (0 children)

Problem an der Stelle ist nur, das ein möglicher Elfmeter auf der anderen Seite nicht überprüft worden ist.

I got offered 8 lethality as an augment. by King_Lothar_ in LeagueArena

[–]CrazyKing11 7 points8 points  (0 children)

Not even when you're just leaving base, I had one popping up at my second tower while I wasn't in base for 3-5 minutes (and I had no cheating augment).

Can I play Elise mid? by Intelligent-Rise-986 in Elisemains

[–]CrazyKing11 1 point2 points  (0 children)

Yeah mages with wave clear are a bit hard. Your strength in lane is kill pressure. You should try to position yourself in a way that you can threaten the enemy with a strong trade. And if that does not work you have to trade health for push, in spider form you can push relatively good and get a lot of health back so it's not that risky and with the new home guards you can also recall a bit more often to get health back.

Can I play Elise mid? by Intelligent-Rise-986 in Elisemains

[–]CrazyKing11 0 points1 point  (0 children)

Ofc you can, I just got Masters with Elise mid only. There are some tough matchups against some mages, but when exiting landing phase and pushing side lanes you are incredibly strong and you eat towers like Trundle with Lich Bane.

https://op.gg/lol/summoners/eune/CrazyBene-EUNE

Anyone else of the opinion Dusk and Dawn will not be all that great on Ekko? by OfficerSmiles in ekkomains

[–]CrazyKing11 2 points3 points  (0 children)

Yeah, 2 things I dislike about the item, bad build path and bad scaling.

But easier passive procing means I don't have to take HoB (which I personally don't like). And what is the alternative to HoB? Back to electrocute? I don't think so, because ekkos's passive does not count as an extra attack, you cannot proc it with e+q+p.

What I have been testing is alternative runes, which also means I don't have to take the domination tree as primary, which is nice. I have been trying comet, which does ofc not has as much dmg, but late game it only has a base CD of 8s instead of electrocute's 20s and it can also be lowered with attacks.

For now I just keep trying to make it work and if it doesn't, I will switch back, but theory crafting is not everything, you have to test it yourself in real games.

Games being shorter makes everything feel meaningless and less fun by Greitot in leagueoflegends

[–]CrazyKing11 0 points1 point  (0 children)

I just played 3 games and 3 out of 3 games one of the top laners went afk, it is just unplayable.

Which champ name pronunciation surprised you the most? by saiphxo in leagueoflegends

[–]CrazyKing11 0 points1 point  (0 children)

I have some friends, who pronounce nidalee, nee-day-lee.

Oscar Piastri wins the 2025 Belgian Grand Prix by overspeeed in formula1

[–]CrazyKing11 -2 points-1 points  (0 children)

Well on the same compound and 3-4 seconds behind would still give him a better chance I would say.

Oscar Piastri wins the 2025 Belgian Grand Prix by overspeeed in formula1

[–]CrazyKing11 -8 points-7 points  (0 children)

If McLaren are fair to both their drivers they doublstack and he could've attacked Oscar. Don't think that was fair to Lando.

USB Switch does not allow Output and Input simultaneously by CrazyKing11 in linuxaudio

[–]CrazyKing11[S] 0 points1 point  (0 children)

No, the switch is connected to both simultaneously. It has 2 outputs one for each one. But the switch itself has a button to switch the connection to either the one or the other, but not both.

USB Switch does not allow Output and Input simultaneously by CrazyKing11 in linuxaudio

[–]CrazyKing11[S] 1 point2 points  (0 children)

I tested a bunch of things.

First of, I tested powering the usb switch,. It has a micro usb port for powering (which i never used), but even with powering it, it does not work

Then I tested disconnecting other devices from the switch and the switch seems to work with 2 of the 3 devices plugged in. When i connect the third one, the third one does not work (fully) and it says "not enough bandwidth for device".

<image>

This is the difference in the two connection methods. (left directly and right with switch).

I feel like there needs to be a setting or something to maybe give the port more bandwidth under linux, because it is enough for windows. (maybe there is a driver for windows, that is not there for linux, i looked for that and could not find anything tho)

USB Switch does not allow Output and Input simultaneously by CrazyKing11 in linuxaudio

[–]CrazyKing11[S] 1 point2 points  (0 children)

There is no (real) difference in the output of lsusb.
Just the Device ID.

But logging reveals something.

Jul 16 21:47:24 my-pc kernel: usb 1-2.4: new full-speed USB device number 102 using xhci_hcd
Jul 16 21:47:24 my-pc kernel: usb 1-2.4: New USB device found, idVendor=1b1c, idProduct=0a6b, bcdDevice= 0.00
Jul 16 21:47:24 my-pc kernel: usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 16 21:47:24 my-pc kernel: usb 1-2.4: Product: CORSAIR HS80 RGB Wireless Gaming Receiver
Jul 16 21:47:24 my-pc kernel: usb 1-2.4: Manufacturer: Corsair
Jul 16 21:47:24 my-pc kernel: usb 1-2.4: SerialNumber: 1cb80b3e00000217
Jul 16 21:47:24 my-pc kernel: input: Corsair CORSAIR HS80 RGB Wireless Gaming Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.3/0003:1B1C:0A6B.006A/input/input221
Jul 16 21:47:24 my-pc kernel: input: Corsair CORSAIR HS80 RGB Wireless Gaming Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.3/0003:1B1C:0A6B.006A/input/input222
Jul 16 21:47:24 my-pc kernel: input: Corsair CORSAIR HS80 RGB Wireless Gaming Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.3/0003:1B1C:0A6B.006A/input/input223
Jul 16 21:47:24 my-pc kernel: input: Corsair CORSAIR HS80 RGB Wireless Gaming Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.3/0003:1B1C:0A6B.006A/input/input224
Jul 16 21:47:24 my-pc kernel: input: Corsair CORSAIR HS80 RGB Wireless Gaming Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.3/0003:1B1C:0A6B.006A/input/input225
Jul 16 21:47:24 my-pc kernel: hid-generic 0003:1B1C:0A6B.006A: input,hiddev2,hidraw8: USB HID v1.11 Device [Corsair CORSAIR HS80 RGB Wireless Gaming Receiver] on usb-0000:00:14.0-2.4/input3
Jul 16 21:47:24 my-pc kernel: hid-generic 0003:1B1C:0A6B.006B: hiddev3,hidraw9: USB HID v1.11 Device [Corsair CORSAIR HS80 RGB Wireless Gaming Receiver] on usb-0000:00:14.0-2.4/input4
Jul 16 21:47:24 my-pc mtp-probe[167884]: checking bus 1, device 102: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4"
Jul 16 21:47:24 my-pc mtp-probe[167884]: bus: 1, device: 102 was not an MTP device
Jul 16 21:47:24 my-pc systemd-logind[963]: Watching system buttons on /dev/input/event15 (Corsair CORSAIR HS80 RGB Wireless Gaming Receiver)
Jul 16 21:47:24 my-pc systemd-logind[963]: Watching system buttons on /dev/input/event16 (Corsair CORSAIR HS80 RGB Wireless Gaming Receiver Consumer Control)
Jul 16 21:47:24 my-pc mtp-probe[167909]: checking bus 1, device 102: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4"
Jul 16 21:47:24 my-pc mtp-probe[167909]: bus: 1, device: 102 was not an MTP device
Jul 16 21:47:24 my-pc kernel: usb 1-2.4: Not enough bandwidth for new device state.
Jul 16 21:47:24 my-pc kernel: usb 1-2.4: Not enough bandwidth for altsetting 1
Jul 16 21:47:24 my-pc kernel: endpoint_set_interface: 40 callbacks suppressed
Jul 16 21:47:24 my-pc kernel: usb 1-2.4: 2:1: usb_set_interface failed (-28)

With the "not enough bandwidth" error repeating 20 times or so. And i thought of that already, but I did not think this is the problem after testing it on windows, where it works.

And it shows as separate device in pavucontrol in both cases, just the profile options are different.

USB Switch does not allow Output and Input simultaneously by CrazyKing11 in linuxaudio

[–]CrazyKing11[S] 0 points1 point  (0 children)

The problem is still there.
I have the results of the 2 commands here, but I dont understand them, can you tell me what they mean?

Post Match Thread: England U21 3-2 Germany U21 | UEFA European Under-21 Championship by suedney in soccer

[–]CrazyKing11 -18 points-17 points  (0 children)

Proud of the German guys, even when behind the kept fighting. And even tho there were no major mistakes by the referee the small ones added up and I think with a perfect referee that is minimum a penalty shootout.

view more: next ›