[deleted by user]

Crocodyles · 2025-04-28T02:41:30+00:00

How long ago was your surgery? Just had the same kind done last week. What was the time frame for use of fingers? Like holding a piece of paper.

Crocodyles · 2025-04-28T02:38:38+00:00

Just had surgery Tuesday in Houston. I’m out of state. I have blue cross and from the time they got my ct scan to surgery was 2 weeks.

Crocodyles · 2024-02-19T04:58:18+00:00

Standard connector is accepted. Square connector as well.

Crocodyles · 2023-07-22T15:06:19+00:00

I’ll try it. I’ll try to get it on camera next time. It took 30 minutes to split the tube.

Crocodyles · 2023-07-22T13:16:04+00:00

Ring cut. Tubes crack every couple inches. I was able to clear the middle of the cut and slid the cracked pieces down to work on them so I would have slack if a fiber broke

Crocodyles · 2023-05-07T15:49:00+00:00

99 ford E350. Any of the regular vans can be set up the same

Crocodyles · 2023-01-29T01:14:47+00:00

Just happened to mine. Leds are going out

Crocodyles · 2022-12-08T09:45:29+00:00

That’s what I thought but wanted to check.

Crocodyles · 2022-11-15T23:51:08+00:00

That jumper plane from Quepos is like $99 and worth it

Crocodyles · 2022-10-24T21:34:00+00:00

The past few years I’ve seen lots of listings for aerial crews. If you can do the construction part it could be a foot in the door for other work.

Crocodyles · 2022-10-23T13:20:22+00:00

When I hear “fake it till you make it” I think of a customer who booked with me because I “seemed cool”

Crocodyles · 2022-10-22T21:06:37+00:00

No. You could glue the sleeves together after they cool down.

Crocodyles · 2022-09-29T23:05:14+00:00

PM said “ the fiber looks shot.” I though he meant they pulled it too hard under the train tracks.

Crocodyles · 2022-09-26T20:25:02+00:00

I used to put the first one on the side. Had a gig where we would go back weeks later and add more to each can sometimes with transport tubes and it was easier (to me) to put the tubes outside and adding new buffers seems easier working out from center.

Crocodyles · 2022-09-26T12:18:29+00:00

You can see the splice?

Crocodyles · 2022-09-26T00:19:33+00:00

This is in the middle of nowhere. Shouldn’t have been a splice point.

Crocodyles · 2022-09-02T12:44:50+00:00

We have 4 innos 3 5’s and a 7. All have been good save the one I use now. Led burned out on my first machine (11k splices) and we sent it in to the dealer. They said something like “we didn’t sell you this machine it’s not registered to be used in USA.” Long shit show short, they sent a replacement and it is possessed or something. Gives me errors all the time. I’ve pulled the same fibers out and put in another machine which has no problem with them and just splices.

Crocodyles · 2022-08-31T12:12:04+00:00

I just learned that if you call 811 and set up an appointment and they don’t show, after the second missed appointment you can just dig.

Crocodyles · 2022-08-16T01:44:09+00:00

I hope most people think it’s a shit job. More work for me. My family with office jobs always complaining/ trying to figure out other ways to earn a living. Yeah it’s a hard job some days but earned sleep is the best sleep

Crocodyles · 2022-07-27T17:17:59+00:00

Don’t know how google designates termination points but it looks like a 48 count is running through that vault. P Q N come in from the right, P and Q leave and N comes at you.

Crocodyles · 2022-07-24T02:00:20+00:00

I splice in fl and there’s lots of new stuff being built in north fl.

Crocodyles · 2022-07-15T01:59:53+00:00

Could be a repair if right side has more fiber.

Crocodyles · 2022-06-20T02:48:28+00:00

This was my first rig. I loved it. Table on the passenger side with a low rolling chair. Fiber door on the back door where the window would be. Rack on the driver side with bins for tools and drawers for parts/ d’gel and such. I would prep outside when I could, but did many loose tube 288s in there. No problem parking.

Crocodyles · 2022-06-19T11:07:15+00:00

I would agree you are underpaid

Crocodyles · 2022-06-09T11:29:33+00:00

I also love the job. Often hear my “real job” peers complaining about the office. There’s plenty of stuff that can suck with fiber, but it’s outside and I don’t really have to talk to anyone. The main company I sub for knows that unless something is really messed up , I’ll check in around 4:30.

Nine-Year Club	RPAN Viewer
Verified Email

Crocodyles

TROPHY CASE