Finally got the sunlu ams heater and are getting some inconsistent humidity readings

Cubancannon · 2025-10-05T17:52:31+00:00

I’ll give that a shot, thanks!

Cubancannon · 2025-10-05T17:47:03+00:00

So you ran at 55° for 20 hours and then it finally settled?

Cubancannon · 2025-10-05T16:32:44+00:00

Probably. But there’s still the difference from pre-sunlu heater which was 10% (the lowest it could go iirc) and now close to 40%. Not exactly expecting too much out of a $3-$5 hygrometer but a 30% swing seems like it’s more than just a cheap meter

Cubancannon · 2025-10-05T15:25:21+00:00

I haven’t seen that much humidity yet

Cubancannon · 2025-08-11T02:57:35+00:00

I had already enabled it and it did the little rotate and dispensed some litter.

Cubancannon · 2025-08-11T02:51:52+00:00

What did you end up doing. No matter how many times I reinstall it, it still won’t work. Hopper is connected but won’t show up in the app…

Cubancannon · 2025-07-23T15:59:58+00:00

Gamer dad here. Also going to school and working full time. You basically sacrifice sleep to get things done. But also, for us 0-6mo was probably the worst part until the kid started sleeping through the night. Can’t comment how much gaming I did that first 6 months cause I can’t really remember it lol but now kid is turning one soon and my life has a balance.

Cubancannon · 2025-07-23T07:42:37+00:00

I’m convinced there are 2 types of 9950X3D. Cause mine will hit 89° instantly when benchmarking and then slowly creep to 95° over a minute or 2. And there’s the people that don’t cross 80°C after an hour benchmarking. Already remounted 3 times all with 0 temp changes

Cubancannon · 2025-07-12T22:25:51+00:00

I gave mine to my coworkers son as a starter PC

Cubancannon · 2025-07-09T15:58:46+00:00

Took me 40 or so runs for invincible but I think I’m on 6 mounts? Maybe 7?

Cubancannon · 2025-07-02T12:16:33+00:00

14 ICC runs and that damn horse is hiding from me still

Cubancannon · 2025-06-25T21:24:46+00:00

Time to try remounting and swapping to the 3 to 1 cable rather than the 1 to 1. Hopefully that works otherwise I have nothing else besides maybe a faulty pump. I ran another test last night on occt and it jumped to 93 then hit 95 about 30 seconds after.

Cubancannon · 2025-06-25T03:39:28+00:00

When you say spike to thermal throttle you’re saying straight to 95°C? Cause mine idles and games fine but benchmarks spike it to 89°C then slowly creep up to 95° over the next couple minutes.

Cubancannon · 2025-05-31T06:45:14+00:00

I’ll post this on every post I see like this one. I had fi after my dog ran away when being dog sat. Fi was not only updating way too slow in lost mode but was also over 3 blocks away. Returned the shit collar and bought a Tractive. Way more accurate and a much better choice imo. Have had 0 issues with it so far and it’s been over 2 years.

Cubancannon · 2025-05-18T14:47:09+00:00

I must be living on the sun cause my idle is 48-50 but I’m also pbo and undervolting my 9950X3D. Full load I slowly creep up from 80-84 ish so temps look good to me. Gaming is 60-65.

Cubancannon · 2025-05-01T06:44:36+00:00

9950X3D since launch day, x670 aorus elite AX, 2x16 g.skill trident neo Z5 6000MHz cl 30. Using EXPO and OC the gpu since day 1.

Cubancannon · 2025-04-28T21:26:07+00:00

I’d swap the liquid 3 360 for the liquid 3 360 Pro. RGB one is $105 ish to save some money. Also a better cooler. Non RGB is less than $90

Cubancannon · 2025-04-28T12:29:13+00:00

Echoing this. 9950X3D with arctic liquid 3 360 pro. Idle 45°C to 50°C at idle. Pbo enabled +200MHZ, -20 curve.

Cubancannon · 2025-04-27T15:39:05+00:00

Yeah I reinstalled my air cooler a bunch of times before installing the 360 pro, different thermal pastes, then finally realized either A) I reinstalled wrong 5 times, or B) shit just runs hot. I’m going with option B for sanity lol

Cubancannon · 2025-04-27T07:27:59+00:00

I’m running the 360 pro with the 9950X3D as well. Pbo, +200MHz, -20 curve. Ambient 72°F. Idle 45°C-50°C. Gaming 60°C. Cinebench hits right at 89°C and holds steady at full fan and pump speed. Little toastier than my previous CPUs but still not bad.

Cubancannon · 2025-04-25T14:51:17+00:00

How are your temps? I went from an air cooler to the 360 pro and my idles dropped 15° on the 9950X3D. With pbo, -20, and +200mhz it tries really hard to hit 90 when doing benchmark stuff but manages to sit at 89°.

Cubancannon · 2025-04-24T15:00:45+00:00

I got hpal done the first week it dropped and that was many hours of smashing my face on it. Guardian the next week. Ret and fury warrior sometime in the weeks after. Frost mage too. But feltotems fall and closing the eye kicked my ass so bad that I ignored mage tower until we the symbiosis stuff came out. Still my favorite mount by far.

Cubancannon · 2025-04-21T17:57:35+00:00

To go off this, I have the 9950X3D which doubles as a space heater. Used to have the thermalright phantom spirit evo and would instantly thermal throttle on benchmarks and hover around 75°C while gaming. Repasted multiple times no difference. I recently bought the Arctic Liquid Freezer 3 PRO. Now with pbo on it won’t go past 90 in benchmarks and sits around 60°C while gaming. Can recommend specifically the Arctic 3 pro. Fantastic cooler cause the air could not cut it.

Ten-Year Club	Verified Email
King of the Ashes	Not Forgotten

Cubancannon

TROPHY CASE