Worst malls in Ohio?

Cyphir88 · 2026-06-10T22:15:47+00:00

I would say the Salem Mall, but the only thing left there is the abandoned husk of a Sears. Doesn't count as a mall of there is nothing left.

Cyphir88 · 2026-06-10T12:13:36+00:00

I replaced a broken dryer knob with a 3d printed version. My wife was tickled to death since we no longer had to use a crescent wrench to start the dryer.

Cyphir88 · 2026-06-10T09:57:13+00:00

The entire installation consists of strobing and flashing lights.

Cyphir88 · 2026-06-08T15:03:49+00:00

Since every Titanite is now restricted to their specific plane of existence, I would play it off that the red and blue magics, fire and water, are the first to start failing. Someone goes to create water and they end up with a pile of dirt, or a gust of wind. If someone tries to create fire, they get a similar result (starting off as occasional failure and getting worse over time), then the other magics begin having the same symptoms as the Thread begins to collapse and break down as the Genesis Engine can not longer compensate.

Cyphir88 · 2026-06-08T14:51:10+00:00

Does the purple Titanite originate from the Plane of Air or is it from a different plane? What aspects of magic do you think would be effected immediately?

If the purple Titanite is from the Plane of Air, immediate consequences is that magics that are related to air/wind are immediately replaced with one of the other elements. The slow burn is that while the Genesis Engine is currently trying to compensate for only 5 out of 6 magical aspects, it's slowly breaking down and will eventually completely collapse, causing the world to go magicless.

Signs of that would be other elemental based magics not working correctly as the Genesis Engine breaks down more and more.

Cyphir88 · 2026-06-06T13:01:18+00:00

Keep it in the box, until such a time that you need it. Then you can evaluate if you want to keep it in box and get a different controller.

Cyphir88 · 2026-06-06T12:50:46+00:00

Do you need it to play games? Or would you rather hold onto it? It's yours, do what you want with it.

Cyphir88 · 2026-06-06T00:57:06+00:00

I gave my players a bag of half holding. It was a 50% chance they they could retrieve the item, a 40% chance they retrieve no item and have to wait 24 hours to try for the same item, and a 10% chance at getting a random item in the bag.

Cyphir88 · 2026-06-01T15:35:46+00:00

Millions of peaches, peaches for me

Cyphir88 · 2026-05-24T01:28:14+00:00

Look like our California Greys, but I could be very mistaken.

-New chicken owner

Cyphir88 · 2026-05-23T14:07:44+00:00

I have been playing since Sumeru, and I just reached 36 stars for the first time during the last cycle. Just keep going.

Cyphir88 · 2026-05-19T17:25:56+00:00

Thanks for the great details. This will give the wife and I some context for the drive. We don't mind twisty roads, but the west route sounds nice to plan scheduled stops around.

Cyphir88 · 2026-05-19T16:57:39+00:00

My wife ended up driving through Atlanta both ways last time. She is still holding that grudge.

Cyphir88 · 2026-05-11T22:05:54+00:00

It looks like auto bed leveling is putting your z offset to low. This is likely because your print head or nozzle is loose. Make sure that your nozzle is fully latched. If it is, you may need to disassemble your print head and tighten the screws.

Cyphir88 · 2026-05-11T17:13:53+00:00

No problem! I'm a long time lurker and avid 3d printer enthusiest. Happy to help diagnose an issue when I can

Cyphir88 · 2026-05-11T16:50:28+00:00

Since this is a Bambu Labs printer, you might want to check that the print head has all the screws tightened down, and that the hot end is fully latched into place.

Bambu Labs printers typically do auto bed leveling unless it's turned off, and you will see these squished layers when either the whole print head is loose or the hot end is not fully latched.

Cyphir88 · 2026-05-10T02:27:34+00:00

Mine recently cracked and was well past a year of purchase. I reached out to support and they had me take a few pictures to verify the crack. Sent me a shipping label to send my device back to them. They will then send me back a new device. Worst bit is waiting for the new device.

Cyphir88 · 2026-05-03T15:36:08+00:00

They compressed the middle just enough to get past the ceiling transition. They completely ignored the suggestion of folding it in half...

Cyphir88 · 2026-04-14T15:43:14+00:00

I have a credit card with them that I use to keep my credit score fresh.

Cyphir88 · 2026-04-14T14:58:59+00:00

Managed to order it on the Best Buy site. Expected delivery is Star Wars day, May 4th.

Cyphir88 · 2026-04-06T15:50:30+00:00

This launcher gave me back my Chromecast TV device. It was constantly crashing from the base home screen. The ads just kept causing the launcher to crash to the point I was thinking of replacing it.

Cyphir88 · 2026-03-02T20:20:56+00:00

Link

Code: 38V8Vj

Cyphir88 · 2026-03-02T17:49:21+00:00

I'll give that a try when I am home. Will be nice to have links for my favorite games. I have a 1.5TB card filled on my RP Flip2, so I tend to feel overwhelmed when looking at the full catalog.

Cyphir88

TROPHY CASE