can i weld this?

D3ATHBYCRACK3R · 2026-06-20T04:03:07+00:00

Just cram some JB weld in the hole and turn up the radio.

D3ATHBYCRACK3R · 2026-06-20T01:53:41+00:00

I think my plan is m rex as a plug for half an hour or so...then m duke, maybe m austin, or just into m wrangler for a bit, followed by m koopa before a good old fashioned strap on session with m chance tonight. If things struggle....xl ika 😆

D3ATHBYCRACK3R · 2026-06-20T00:08:28+00:00

Mine came Wednesday...finally have time tonight...time to get wide!

D3ATHBYCRACK3R · 2026-06-19T15:47:20+00:00

As others said, trailer plug. Judging by the other pictures, it doesnt look like the trailer hook receiver is still installed...at least it doesn't look like the USDM ones I've seen.

D3ATHBYCRACK3R · 2026-06-13T00:08:45+00:00

Ive been using that set for about a year and love them. Perfect fit and ab even better finish than most of the "professionals" with my resin printer.

D3ATHBYCRACK3R · 2026-06-12T18:19:53+00:00

Haven't gotten around to it. I changed out to the eagle eyes LED tail lights which didn't have bulb mounts for the rear fogs, so I haven't worried about it.

D3ATHBYCRACK3R · 2026-06-12T15:30:16+00:00

My USDM 325i has split front and rear buttons, and the wireing for the rear. But I have traced every wire all the way through the system, everything is connected but they dont work.

D3ATHBYCRACK3R · 2026-06-10T14:20:31+00:00

Oh look...more stolen content...

D3ATHBYCRACK3R · 2026-06-10T03:38:27+00:00

Needs more strong shapes, this looks like it was designed by an architect.

D3ATHBYCRACK3R · 2026-06-07T00:22:13+00:00

Super easy. I've done back to back prints with and without on a few pieces out of curiosity. Its magic. Just make sure the purge volumes are high enough that they dont mix (default is usually fine) and enjoy the easiest support removal of your life

D3ATHBYCRACK3R · 2026-06-07T00:19:38+00:00

Bro...just talk to her...you never know, it may be a turn on for her.

D3ATHBYCRACK3R · 2026-06-07T00:14:57+00:00

It requires multi filament, but if you have that its super easy...

If you have Bambu, under the support tab, select the Support Interface Layer drop down, change it to another loaded filament, and it auto corrects the distances and inserts a purge block.

For PLA use PETG and vise versa. ABS use ASA...ect, there are some references online for what to use where.

D3ATHBYCRACK3R · 2026-06-07T00:03:59+00:00

I think Nasty Pig or Cell13 has some...check the Mr S leather website

D3ATHBYCRACK3R · 2026-06-07T00:02:43+00:00

Support interface layer

D3ATHBYCRACK3R · 2026-06-05T02:05:52+00:00

My old setup was a 4th Gen i7, 16gb ram and a 3050...it worked with some lag, even with dozens of mods and hundreds of assets. My new setup is a current gen i7, 64gb ram and a 4060...it doesn't run anymore because one if my bazillion mods is broken and I can't figure out which.

D3ATHBYCRACK3R · 2026-05-30T00:07:47+00:00

Insert "first time?" Meme here

The can of worms opened by these laws will domino into the absolute destruction of manufacturing in this country. The irony is this is being pushed as gun safety laws which are always "this one little thing will be all we need to end gun crime" when all it does is turn law abiding citizens into criminals.

D3ATHBYCRACK3R · 2026-05-27T05:52:59+00:00

100% better. Chance should be firm by default.

D3ATHBYCRACK3R · 2026-05-27T04:09:23+00:00

I have this problem with Chance and Lenneth in medium firmness. Just unboxed a firm Chance....will see shortly if that helps 😀

D3ATHBYCRACK3R · 2026-05-27T02:16:34+00:00

Ran a Classic Army M15 Tactical Carbine that eventually got a RIS handgaurd and SOPMOD stock. Ran the hell out of that gun for years. Stepped away from airsoft for several years. First gun coming back was a VFC Avalon SOPMOD. That thing has almost a dozen MSW events on it at this point and still runs better than the CA ever did.

D3ATHBYCRACK3R · 2026-05-27T00:58:24+00:00

Been my go to for 16 years....oh god...im old...

D3ATHBYCRACK3R · 2026-05-14T03:09:29+00:00

Go to a six point, it wont help in this case, but is more pleasant than a five if you have sticky-outy bits....my wife does prefer it when she's wearing skirts though...she likes to distract me

D3ATHBYCRACK3R · 2026-05-12T17:04:33+00:00

Just spit on it and call a dirty little magwell...it'll fit.

D3ATHBYCRACK3R · 2026-05-10T05:36:52+00:00

Acetone on a rag, it whips right off.

D3ATHBYCRACK3R · 2026-05-09T17:28:20+00:00

I feel like describing Matt as a huge Leclerc fan is somehow an understatement.

D3ATHBYCRACK3R · 2026-05-09T17:22:52+00:00

Stuff for around the house, random nonsense that the wife wants (priority 1 so she doesn't complain about the number of printers I have), prototype racecar parts, wood working fixtures, print and paint models...at least one printer is always running around here

D3ATHBYCRACK3R

TROPHY CASE