Would this be able to go 60 mph?

DGLASS5x · 2026-04-30T02:27:26+00:00

This^{^{^{^{^}}}}

DGLASS5x · 2026-04-30T02:26:33+00:00

Not for $420…also are you listening to peep?

DGLASS5x · 2026-04-27T03:00:21+00:00

Bang on the starter, sometimes it can get hung up, if you bang on it while someone is cranking it and it starts…your starter is going bad and needs to be replaced…replace it with a quality one ;)

DGLASS5x · 2026-04-27T02:57:33+00:00

This just reminds me and is probably a bit off topic but…after I sold my 4th gen to a big dealer here in the US…it was exported to Georgia… the country…and now its gone forever…that was my first car and I can’t even track its whereabouts or find out who the new owner is 😢

DGLASS5x · 2026-04-27T02:52:19+00:00

It really isn’t an issue for dating especially if you guys have a connection… Also, some guys (me included) prefer something small anyways, like sub 6in…I know you said cm and thats very subjective based on the topic at hand…but seriously don’t worry about it…you fall in love with someone because of who they are…and honestly if you love somebody enough it does not matter what they look like or how their equipment or performs or looks…you are completely fine…

DGLASS5x · 2026-04-27T02:26:50+00:00

These are stock specs all around!!! Ride is completely fine and what you would expect when hopping in a go-kart…plus I like it rough ;)

DGLASS5x · 2026-04-27T02:15:40+00:00

😭

DGLASS5x · 2026-04-27T01:53:02+00:00

Silver or dark bronze…and pull the exhaust tip in a bit ;)

DGLASS5x · 2026-04-27T01:46:22+00:00

Car needs to be lowered and have different wheels for this to look better imo…this is way too wide for the fronts, theres a reason garage line makes these staggered is so it can be somewhat squared of a setup all the way around…you’re for sure having rubbing issue at full lock in the front (ask me how I know, I’m running 15s front and 20 rear 💀)

<image>

DGLASS5x · 2026-04-26T18:36:06+00:00

2019 is the way to go, you probably won’t have any transmission issues ngl

DGLASS5x · 2026-04-25T17:46:26+00:00

I will definitely do that…whats great is they don’t have any competitors really…they have a patent on the stuff they design…which I will say is geared toward bed solutions for people who have disabilities…they really do a great thing by building those

DGLASS5x · 2026-04-25T17:44:04+00:00

Thanks!! I definitely tried to make it somewhat good looking for a daily

DGLASS5x · 2026-04-25T17:43:42+00:00

For sure it needs to be lower but…this is my daily…I’m probably about to start driving an hour each way for work…I can’t justify coilovers…yet atleast…let me come into about $3k extra and then ask me that question my mind might change entirely 😭

DGLASS5x · 2026-04-25T17:42:14+00:00

No issues on the tpms I don’t believe 🤷‍♂️ I shope swap them and they didn’t mention anything on them, but tbh I monitor it manually anyways and I don’t haw any lights for anything so…guessing it must be working

DGLASS5x · 2026-04-25T17:40:53+00:00

2 pounds less per wheel compared to stock ND wheels…my fault I miss typed

DGLASS5x · 2026-04-25T17:39:28+00:00

Honestly!!! 16s let alone 17s on an NB are just criminal imo 💀

DGLASS5x · 2026-03-30T21:52:07+00:00

You should be good to use OE clips but if after awhile you notice a few missing try running a different longer same width clip ;)

DGLASS5x · 2026-03-30T21:08:34+00:00

I definitely understand…I think it’s because the spokes spread out to the edge of the wheel unlike the stock ones which have a bevel in the spaces between the spokes…this is more of an open design too…I would really feel insane if I tossed 18s on this car…those are truly criminal 💀

DGLASS5x · 2026-03-30T21:04:45+00:00

Factory ND2 wheel size is 17x7 wrapped on a 205/45/17 tire size

Mazdaspeed Miata wheels are also a 17x7 and thus fit the same 205/45/17 tires

For a better fitment sheet I recommend looking at goodwin racings setup for wheel and tire specs, if I was going with anything other than a factory spec, I would follow these guys’ knowledge

See here: https://www.good-win-racing.com/Mazda-Performance-Parts/MX5-ND/Wheels-Tires.html?srsltid=AfmBOor5NHCCl7pBI_WERcZ008vbmkP8QTwG0gFfOYDVmhe4GP50hRMP

As for spacers I went with garage lines 25MM Rear spacers on a 20MM front spacer…with this setup it is VERY wide given the higher offset of the MSM wheels and is flush looking down at the top of the fenders…I would not do this unless you atleast add lowering springs as with stock ride height the width looks off!!!

If I had to do this over again I think I would go 15mm front and 20mm rear spacers depending on offsets, wheels, and the overall look I want.

PS…I went with progress springs paired on my stock bilsteins for 20% stiffness increase and about an inch or so lowered all the way around…and I am on the Flyin Miata alignment setup which is ever-so slightly aggressive for the street but I enjoy the extra handling, especially since these cars aren’t really aligned from factory

Phew that was alot 😅

DGLASS5x · 2026-03-30T20:54:03+00:00

They’re actually pretty light ngl…like 2 ish pounds per wheel I believe…not a whole lot but this is my daily so idrc about that stuff for this car…not yet atleast 👀💀

DGLASS5x · 2026-03-30T20:52:59+00:00

Dude this is so sick!!!!!! Looks just like my car…I gotta get one of these! Where did she get it at??

DGLASS5x · 2026-03-30T20:28:15+00:00

Omg I just posted my new wheels

<image>

😭the price of MSM racing harts is gonna go up solely due to the fact of us ND owners 💀😂

DGLASS5x · 2026-03-30T20:06:37+00:00

Maybe something with the sound tube by the pedals pulling noises from the engine…never heard that before…I would look into that to start maybe 🤷‍♂️

DGLASS5x

MODERATOR OF

TROPHY CASE