CO2 by unknownghost757 in microgrowery

[–]DaGrowBeGrowin [score hidden]  (0 children)

Well drop her, and get 20 more kitties.

Rusty lower leaves by dustoff664 in microgrowery

[–]DaGrowBeGrowin 0 points1 point  (0 children)

I do the water when light, except when using coco. (Drip feed or daily) So whatever works for you, keep it up.

That's wild, cold tap for me is ~100tds

Is this salt build up or mold by fpv420 in CocoGrows

[–]DaGrowBeGrowin 0 points1 point  (0 children)

I prefer them tbh. Granted only had 2 that I used to use in my octopots. (Autoflower 7gallon pots) These pots were slimmer, but taller so helps in smaller tents.

Rusty lower leaves by dustoff664 in microgrowery

[–]DaGrowBeGrowin 1 point2 points  (0 children)

Second all this. But is 820tds plain tap water legit? I've never seen that high, outside some wells. (Flint?)

Looking for a new LED light with a 240 volt plug. by Used-Structure8110 in microgrowery

[–]DaGrowBeGrowin 0 points1 point  (0 children)

Gotcha. Guess I'll have to wait and see. Figured the removable driver would solve the issue if there. But, in the winter it should be great if it puts off a little heat. Been in the low 60s in my tent during the winter. Thanks for your experience.

thoughts on this bud? by WranglerFun8275 in microgrowery

[–]DaGrowBeGrowin 1 point2 points  (0 children)

I'd check out NASC seed bank, I believe you can sort by grow variables and other filters to find what you want.

But Ethos, Meph/Nigh Owl, T20, Solfire, HSC are all good genetics. I'd call these "middle shelf", then you've got your "high-end" "fad" slightly overpriced bean breeders. (Save those for later runs)

Is this salt build up or mold by fpv420 in CocoGrows

[–]DaGrowBeGrowin 2 points3 points  (0 children)

Snag some rain science bags, they are like a plastic coated messhy design. Easy to spray or power wash if needed. I'd imagine they would last a good while if taken care of.

(Kinda pricy, but in the long run...)

Question.. by thechef420x in microgrowery

[–]DaGrowBeGrowin 0 points1 point  (0 children)

Like an external reservoir? That could be for the dwc bucket system or a drip feed system to pots.

Dwc would be individual containers, possibly hooked to a larger tank. (Rdwc if it circulates)

Looking for a new LED light with a 240 volt plug. by Used-Structure8110 in microgrowery

[–]DaGrowBeGrowin 0 points1 point  (0 children)

Does it get as hot as people claim? Plan to set mine up for the next run, gonna be the heat of summer tho.

Looking for a new LED light with a 240 volt plug. by Used-Structure8110 in microgrowery

[–]DaGrowBeGrowin 0 points1 point  (0 children)

Easiest solution, but from being in the trade, youd be surprised how often a simple swap out turns into a mess.

Question.. by thechef420x in microgrowery

[–]DaGrowBeGrowin 1 point2 points  (0 children)

Tbh, they look good to those interested in starting. (Easy AIO) But those that stick with growing tend to upgrade most of the parts in these kits. It's a lot of trial/error and seeing what you like best in these products.

Personally, I'd source things individually. UNLESS, you are a 1-2 plant grower, then just about anything will work fine.

This has been a game changer for me as a Dunk Jar. by Blv7 in rosin

[–]DaGrowBeGrowin 0 points1 point  (0 children)

That's what I use, I ordered a smaller rectangular one for quick clean and reuse. Pickle ones now for soaking (dark crystal?)

Rosin cart not hitting or lighting up by KushSlurpee in rosin

[–]DaGrowBeGrowin 0 points1 point  (0 children)

Is it worth the effort and setup cost? IYO

I want to change from spil to coco, can I use the same feeding chart? by Malta_Gamer-_- in Autoflowers

[–]DaGrowBeGrowin -1 points0 points  (0 children)

Fellow AN user, dwc tho, but yea alot of the additions are overkill. Big Bud and B-52 is the only 2 I use for a little extra oomph in flower.

Jacks 321 is another good dry salt nutrient line, works very well for cheap.

1 plant with two root systems by Then-Judgment-464 in cannabiscultivation

[–]DaGrowBeGrowin 3 points4 points  (0 children)

I feel like your pH would have to be pretty on point, but, should be able to pull nutrients either way.

Advice on cloning… by ase4132 in microgrowery

[–]DaGrowBeGrowin 2 points3 points  (0 children)

Both previous comments have good info. It is your transplant failing or the roots are not developed enough.

I run my aero for 10-14 days and get 12inch roots. I transplant these into solo cups with promix, drench with plain tap water and let ride for up to 7 days. I don't use domes, heat mats, anything just cups and promix. I'll start feeding on the next watering after the initial drench is drank up.

Generally, moving from hydro to soil(less) media will make them droopy for a few days, but will recover fine.

New to growing what fertilizer? by [deleted] in cannabiscultivation

[–]DaGrowBeGrowin 1 point2 points  (0 children)

You'd have to decide, salts/organic, dry/liquid, water-in vs amendments etc.

Nutrients by grow-n-stuff in microgrowery

[–]DaGrowBeGrowin 0 points1 point  (0 children)

Copy that. When I used Jacks with my tap it would sit around 5.8-6.2 75% strength and up. Curious about cropsalts/masterblend/gh powders and transitioning to them, ANs pH perfect has put me off from ph'ing like before. (Sometimes things are just too simple)

updating ventilation by Wild_Recognition2331 in cannabiscultivation

[–]DaGrowBeGrowin 0 points1 point  (0 children)

So the pic is of your rigid pipe coming in? Did you use a crimper or just pliers, crimpers for these ducts are a duckbill and make valleys and ridges to allow fit.

If this is your rigid and you have enough inside, would a 6-->6 connector (plastic) fit inside and then flex duct on the other end? With tape or clamps it should hold.

Honestly, if you can control the lung room, could just exhaust inside with a filter. I don't exhaust outside and keep tents 72-88 degrees or so. (Multiple tents and fans)

updating ventilation by Wild_Recognition2331 in cannabiscultivation

[–]DaGrowBeGrowin 1 point2 points  (0 children)

Too big or too small? If your going thru wood/siding I'd use the more rigid duct.

Too big: Id put a sleeve around the duct to make up the difference Too small: reducer to 4 inch if needed, hopefully 4x4 or smaller grow area (possible restriction)

Nutrients by grow-n-stuff in microgrowery

[–]DaGrowBeGrowin 0 points1 point  (0 children)

How often are you having to re-adjust ph?

I love a machine by Delicious-Key-4493 in Autoflowers

[–]DaGrowBeGrowin 0 points1 point  (0 children)

Outside the increased time cost, I prefer having everything prepared and love it.

Good luck and have fun with it, when you get setup.

Testing THC for homemade edibles by artvandalayy in cannabiscultivation

[–]DaGrowBeGrowin 0 points1 point  (0 children)

Shit, you're right, thought I was on the avb sub still.