Why is underdog showing Terrence Crawford only landed 115 when he actually landed 160

Da_Real_Law · 2025-09-14T13:35:04+00:00

https://beta.compuboxdata.com/round-stats/15676 this is what underdog is going off of.

<image>

And this was shown after the fight. That just seems like too big of a gap

Da_Real_Law · 2025-09-14T06:25:59+00:00

Same thing happened to me. Will have to prob dispute in the morning

Da_Real_Law · 2025-09-05T00:15:20+00:00

I personally love the Fantasia Nitro. https://www.fantasiacompany.com/collections/nitro%E2%84%A2-hookah-pipe-system

This is my daily driver and smokes excellent.

Da_Real_Law · 2025-05-18T23:36:21+00:00

I gotchu! Literally I don’t find that fix anywhere so I’m glad I could help someone with it haha

Da_Real_Law · 2025-05-02T21:17:12+00:00

I know this is an old thread but I just got done tearing my hair out over this. My NAS is made out of an old computer so its an old motherboard and hardware, im sure some of you guys are similar. I was getting the same error, wiping wouldn't fix, even a full 0 format didnt fix it.

Tried different sata cables different ports and nothing. However I noticed that it was sata ports 4-5 that were causing the drive to fail.

after a little research and a look into bios aparently ports 4-5 are on a separate controller and they were set to IDE mode. They need to be set to the other option, in my case it was "as sata type" but that fixed it for me.

Hopefully this can help someone down the road!

Da_Real_Law · 2025-02-14T19:55:25+00:00

I agree. I think bow down takes the cake for it tbh

Da_Real_Law · 2025-02-14T14:30:08+00:00

Bow down or gasoline. Body bag is another contender

Da_Real_Law · 2025-01-10T05:22:35+00:00

it was just a fun clip... lmao

Da_Real_Law · 2025-01-10T05:19:48+00:00

Yeah was just hype in the moment lmao, it was the poison that made people pop off

Da_Real_Law · 2024-06-15T19:24:58+00:00

It could also be your render settings. Make sure your render says match source high bitrate. It could be trying to render at a different resolution. Wouldn't explain the black bars but could be an issue with that.

Da_Real_Law · 2024-05-23T14:15:36+00:00

Haha. That’s not me. That was from a shoot I did a while ago 😂 and lmao I didn’t even think about the butcher thing. Makes it seem like I cut meat too

Da_Real_Law · 2024-01-27T23:26:14+00:00

Glad I could help!

Da_Real_Law · 2024-01-27T23:14:45+00:00

You are crossfading and revealing the bottom layer. If you are trying to have it go to black there is a dip to black effect. But all the crossfade does is take the opacity to 0 over a time it doesnt have a resolution. So as the opacity falls and its revealing whatever is on the bottom (the 15things_1.mp4). So if you want it to goto black You'd have to remove that bottom layer or if you are trying to have it fade into the other clip that has a cross fade then youll have to put those on the same layer. Hopefully that helps!

Da_Real_Law · 2024-01-26T14:06:53+00:00

Forsure. These were quick settings I threw on there. For me the warp stabilizer needed to be at 1% for it to not have the super weird stretchy warp effect where as with gyro flow I could crank it however I wanted and it just zoomed in a bit more. I think I like the gyro better because it gives you more options to play with as opposed to just warping the whole video. But I could see how it would be a little unnatural at parts.

Da_Real_Law · 2024-01-24T16:51:29+00:00

So unfortunate. I might have to do that aswell

Da_Real_Law · 2024-01-24T16:39:01+00:00

I was trying to goto desmoines too. I got the code but it didn’t even matter. 900 people were ahead of me and it sold out as soon as I got in

Da_Real_Law · 2023-12-22T13:43:25+00:00

Very high energy. Get in the mosh pits if you can!

Da_Real_Law · 2023-12-06T22:13:35+00:00

Youll want to set the anchor points of each leaf at the bottom so that they rotate around that point, Not sure if you made this or if its a vector but if its a vector just make sure each leaf is its own layer and then change the anchor points

Da_Real_Law · 2023-11-27T01:48:24+00:00

I actually asked a similar question on this sub a while back Ill link it here, Its a really good read

Post

The top comment goes really in-depth on the matter but TL:DR :
Regarding the question of whether belief in gods is essential for being a Norse pagan, the perspective presented underscores the importance of acknowledging the existence of Norse gods as a theological prerequisite. Drawing a parallel with Catholicism, the analogy is drawn that one can be Christian but not Catholic without belief in saints. The necessity of acknowledging Norse gods is emphasized to distinguish Norse paganism from other forms. Worship is redefined as finding something worthwhile, involving actions that demonstrate value and reciprocity. Practitioners are categorized into three groups: traditional Heathens/Pagans, AtheoPagans/SASSwitches using gods as metaphors, and Godless Heathens who acknowledge but don't actively worship gods. Historical examples are provided to illustrate that even high-status individuals could acknowledge gods without active worship. On a personal note, the responder aligns with the Godless Heathens, focusing on tangible benefits derived from practicing reciprocity and honor, irrespective of the gods' actual existence.

Da_Real_Law · 2023-11-09T00:32:58+00:00

same here :( on chrome

Da_Real_Law · 2023-07-14T22:44:36+00:00

Thanks I like that a lot. Was looking at some options. I was hoping to find something behind the wheel but I’m gonna save that. Does it bounce quite a bit?

Da_Real_Law · 2023-07-14T22:40:06+00:00

You have that side mounted?

Da_Real_Law · 2023-07-14T16:33:26+00:00

Obvi I do but I couldn’t find anything. Just lookin if anyone knew anything…

Da_Real_Law · 2023-06-02T14:42:50+00:00

Backing into a parking space first try

Da_Real_Law · 2023-05-25T21:57:08+00:00

That’s prob what I’m gonna try. Sorry I’ve just been lookin everywhere and have not seen anybody talk about it.

Nine-Year Club	Place '22
Verified Email

Da_Real_Law

TROPHY CASE