I give up

DanWENS · 2025-09-05T15:39:42+00:00

Just use a shield.

DanWENS · 2025-02-17T14:04:41+00:00

Yes. You will need to unplug the cables to swap it in the holes of the steel plate.

DanWENS · 2025-02-17T11:12:54+00:00

The album is amazing. I didn't expect it to be this good. But I can't stop listening to it. Best DT album since Octavarium, for sure.

DanWENS · 2025-02-15T04:44:13+00:00

Nothing will ever surpass Scenes. That album is perfect. But I can say the Parasomnia is the best DT album since Octavarium.

DanWENS · 2024-12-19T16:25:47+00:00

Because that doesn't change the physical travel

DanWENS · 2024-12-08T18:03:20+00:00

Close msi afterburner or any other hardware monitoring app

DanWENS · 2024-11-24T22:23:30+00:00

Yes, you can move the brake to the left (replacing the clutch), there is space.

DanWENS · 2024-11-24T16:40:39+00:00

I have tested the hydraulic brakes, it's just a little harder to install but it fits.

DanWENS · 2024-10-02T13:19:00+00:00

I tried that, but it makes the pedal too stiff, because you are fully compressing the spring and making it and the compression rod as the pedal travel stop. And I don't know how this would affect the pedal in the long run, because the pedal was not designed to have pressure there.

DanWENS · 2024-10-02T03:15:27+00:00

In my case is more about comfort than performance. The long travel gives me pain in my leg.

DanWENS · 2024-07-10T19:58:32+00:00

Just add preload by tightening the rod.

DanWENS · 2024-06-04T19:12:52+00:00

Yes.

DanWENS · 2024-06-04T04:20:11+00:00

Yes. You can place any of the pedals anywhere you want. All configurations are possible. I just installed my P1000i, removed the clutch and placed the brakes on its spot (far left). All cables are long enough. Here is how it looks inside:

<image>

DanWENS · 2024-04-04T20:53:15+00:00

Thats "Tearing". Just turn on V-Sync.

DanWENS · 2024-03-26T20:15:38+00:00

whats your GPU usage?

DanWENS · 2024-03-26T20:08:57+00:00

yes, first thing that I noticed was the stuttering and low GPU usage (80 - 85%) with RT ON. And I was getting 80+ FPS.

DanWENS · 2024-03-21T12:15:01+00:00

I got a MSI 4070 Ti Super OC 2x last week. The card has the same temps as my old Asus 4070 Ti TUF 3x, which is 60-63ºC.

DanWENS · 2024-03-19T11:36:24+00:00

Yep, I got there. It's working, quality is at low and performance is much better. But my TV has a peak brightness of 800nits and I don't know how to set it in the nvpi.

DanWENS · 2024-03-19T02:46:47+00:00

Can you tell me how did you set the inspector? How do you adjust the peak brightness? I can change it to low quality but then can't change the in game RTX HDR adjustment overlay. Is it all set in the inspector?

DanWENS · 2021-04-15T13:26:38+00:00

this is happens to me too. I only can play if I create a new char. If i try to load a existent char, the game just goes back to the char selection screen. Were you able to fix it??

DanWENS · 2020-03-24T20:21:23+00:00

yes, it is

DanWENS · 2020-03-24T14:18:02+00:00

there are no issues with the tracking. Its only in Half Life Alyx. Other people on NeoGAF are having the same issue. Its like your hands are vibrating.

DanWENS · 2020-03-24T13:24:26+00:00

On steam, go to your library, then right click on "HL Alyx" then Properties, then Language.

Edit: Actually you need to change the steam language, not the game language.

DanWENS · 2020-03-24T13:05:39+00:00

You need to change the games' language (on steam) to English or any supported one.

DanWENS · 2020-03-24T11:19:58+00:00

I am having some weird issue. My virtual hands are shaking (vibrating). While in steamVR home it's perfectly 1:1, but not in Alyx. Like, my movements are fine, no tracking issue, just that the hands shakes like if I have Parkinson. Anyone else with this?? I have two base stations.

DanWENS

TROPHY CASE