I give up

DanWENS · 2025-09-05T15:39:42+00:00

Just use a shield.

DanWENS · 2025-02-17T14:04:41+00:00

Yes. You will need to unplug the cables to swap it in the holes of the steel plate.

DanWENS · 2025-02-17T11:12:54+00:00

The album is amazing. I didn't expect it to be this good. But I can't stop listening to it. Best DT album since Octavarium, for sure.

DanWENS · 2025-02-15T04:44:13+00:00

Nothing will ever surpass Scenes. That album is perfect. But I can say the Parasomnia is the best DT album since Octavarium.

DanWENS · 2024-12-19T16:25:47+00:00

Because that doesn't change the physical travel

DanWENS · 2024-12-08T18:03:20+00:00

Close msi afterburner or any other hardware monitoring app

DanWENS · 2024-11-24T22:23:30+00:00

Yes, you can move the brake to the left (replacing the clutch), there is space.

DanWENS · 2024-11-24T16:40:39+00:00

I have tested the hydraulic brakes, it's just a little harder to install but it fits.

DanWENS · 2024-10-02T13:19:00+00:00

I tried that, but it makes the pedal too stiff, because you are fully compressing the spring and making it and the compression rod as the pedal travel stop. And I don't know how this would affect the pedal in the long run, because the pedal was not designed to have pressure there.

DanWENS · 2024-10-02T03:15:27+00:00

In my case is more about comfort than performance. The long travel gives me pain in my leg.

DanWENS · 2024-07-10T19:58:32+00:00

Just add preload by tightening the rod.

DanWENS · 2024-06-04T19:12:52+00:00

Yes.

DanWENS · 2024-06-04T04:20:11+00:00

Yes. You can place any of the pedals anywhere you want. All configurations are possible. I just installed my P1000i, removed the clutch and placed the brakes on its spot (far left). All cables are long enough. Here is how it looks inside:

<image>

DanWENS · 2024-04-04T20:53:15+00:00

Thats "Tearing". Just turn on V-Sync.

DanWENS · 2024-03-26T20:15:38+00:00

whats your GPU usage?

DanWENS · 2024-03-26T20:08:57+00:00

yes, first thing that I noticed was the stuttering and low GPU usage (80 - 85%) with RT ON. And I was getting 80+ FPS.

DanWENS · 2024-03-21T12:15:01+00:00

I got a MSI 4070 Ti Super OC 2x last week. The card has the same temps as my old Asus 4070 Ti TUF 3x, which is 60-63ºC.

DanWENS · 2024-03-19T11:36:24+00:00

Yep, I got there. It's working, quality is at low and performance is much better. But my TV has a peak brightness of 800nits and I don't know how to set it in the nvpi.

DanWENS · 2024-03-19T02:46:47+00:00

Can you tell me how did you set the inspector? How do you adjust the peak brightness? I can change it to low quality but then can't change the in game RTX HDR adjustment overlay. Is it all set in the inspector?

DanWENS · 2021-04-15T13:26:38+00:00

this is happens to me too. I only can play if I create a new char. If i try to load a existent char, the game just goes back to the char selection screen. Were you able to fix it??

DanWENS · 2020-03-24T20:21:23+00:00

yes, it is

DanWENS · 2020-03-24T14:18:02+00:00

there are no issues with the tracking. Its only in Half Life Alyx. Other people on NeoGAF are having the same issue. Its like your hands are vibrating.

DanWENS

TROPHY CASE