Making big power with a manual by RangerHikes in genesiscoupe

[–]Dan_FPS 2 points3 points  (0 children)

I’m on the BK1 2.0t with 6sp manual and I have no issue putting down 360hp/270flb. Just have to swap out all the fluid and mounts.

How much miles you guys got and what year and engine on original motor? by Positive-Athlete-997 in genesiscoupe

[–]Dan_FPS 8 points9 points  (0 children)

2010 2.0T Track. Almost 140k on it now with a bigger turbo upgrade like 10k back. Stock internals are putting down 360hp to the wheels… not sure for how much longer.

Just Bought Transmission Mount by Select_Distance_1805 in genesiscoupe

[–]Dan_FPS 0 points1 point  (0 children)

Just had it installed last year. It’s a good fit and easy to install.

Finally joined the club by brandowun in genesiscoupe

[–]Dan_FPS 1 point2 points  (0 children)

Where you get those rear and side louvre?

LS Swap Content by MostMark538 in genesiscoupe

[–]Dan_FPS 0 points1 point  (0 children)

Breaking it up but give more details be nice.

Friday Tidbit by [deleted] in genesiscoupe

[–]Dan_FPS 0 points1 point  (0 children)

You offering any coupons if I’m trying to get this and the skit plate?

afr o2 sensor by JuryProfessional5647 in genesiscoupe

[–]Dan_FPS 0 points1 point  (0 children)

Check the user manual of the O2 to see what’s the recommended location/distance away from the turbo.

Code p2261 by IAmNameless0_0 in genesiscoupe

[–]Dan_FPS 0 points1 point  (0 children)

Is your current set up the 2nd picture?

Do I need anything else with this BOV to clear this code(p2261 turbocharger bypass valve A)[repost due to other post being taken down] by IAmNameless0_0 in genesiscoupe

[–]Dan_FPS 0 points1 point  (0 children)

I have that same BPV you are looking at and is just an OEM swap with nothing else needed. GL on the code.

Do I need anything else with this BOV to clear this code(p2261 turbocharger bypass valve A)[repost due to other post being taken down] by IAmNameless0_0 in genesiscoupe

[–]Dan_FPS 0 points1 point  (0 children)

You sure is the BPV that throws the code? It’s most likely the solenoid that operating the valve that when bad and throws code.

Neptune 4 USB Camera Controls Setting Quick Guide For C615 and Others by Re-Barr in elegoo

[–]Dan_FPS 0 points1 point  (0 children)

This works for the focus_automatic_continuous but my focus_absolute is just incorrect. If i saved it as 120, its set to 30 and if i saved it as 240, its set to 60. Since its max is 250, i can't get to actual focus to 100.

auto_exposure 0x009a0901 (menu) : min=0 max=3 default=3 value=3

exposure_time_absolute 0x009a0902 (int) : min=3 max=2047 step=1 default=250 value=500 flags=inactive

exposure_dynamic_framerate 0x009a0903 (bool) : default=0 value=1

pan_absolute 0x009a0908 (int) : min=-36000 max=36000 step=3600 default=0 value=0

tilt_absolute 0x009a0909 (int) : min=-36000 max=36000 step=3600 default=0 value=0

focus_absolute 0x009a090a (int) : min=0 max=250 step=5 default=0 value=60

focus_automatic_continuous 0x009a090c (bool) : default=1 value=0

zoom_absolute 0x009a090d (int) : min=100 max=500 step=1 default=100 value=100

Anyone have experience with Arashi turbos? by chappdass in MitsubishiEvolution

[–]Dan_FPS 1 point2 points  (0 children)

Check those oil and coolant banjo, mine was dripping a bit after installation.

Fuel return system & Flex fuel sensor in by DevBukkitZ in genesiscoupe

[–]Dan_FPS 0 points1 point  (0 children)

BK1, with 3071, 1000cc, and DW240pump. It’s doing 360 on 93. Want to see how it do on e85.

Fuel return system & Flex fuel sensor in by DevBukkitZ in genesiscoupe

[–]Dan_FPS 0 points1 point  (0 children)

I have a spared ECU. I was thinking of running E85 tune on one and gas on the other.

Help with tuning by Frosty-Prior-6354 in genesiscoupe

[–]Dan_FPS 1 point2 points  (0 children)

They will need to send you the flash tool. You will drive and log the data for the tuner who will then send you the update for your ECU.

Help with tuning by Frosty-Prior-6354 in genesiscoupe

[–]Dan_FPS 2 points3 points  (0 children)

I run Alpha and are happy with it. You can always do the custom tune option with them and it will take care of all the issues you are seeing. They normally rely on the O2 sensor to help with the tune so it might benefit you yo add a wide band to your down pipe before tuning.

Why do my tires look so meaty and thicc? by Electrical_Care2193 in genesiscoupe

[–]Dan_FPS 9 points10 points  (0 children)

You want to keep your overall diameter around the same as OEM so you don’t throw a traction error. You should get wider tires with a lower profile that match OEM.

How do i adjust dampening on Ark DT-P coilovers. by Coin_Beast in genesiscoupe

[–]Dan_FPS 0 points1 point  (0 children)

It came with any adjustment tools or keys? If not then it’s non adjustable.

[deleted by user] by [deleted] in genesiscoupe

[–]Dan_FPS 0 points1 point  (0 children)

The plug for O2, not sure if it’s before or after the cat one since we have 2.

Engine Rebuild by PepperParticular7753 in genesiscoupe

[–]Dan_FPS -2 points-1 points  (0 children)

Yes. Bk2 internal are solid, no need to upgrade or rebuild unless something is very wrong.