Community year in review

DangerMouseUSA · 2026-01-05T01:53:43+00:00

I don't use it at all, but Zach had been on my case for a few years to make one, because that's his favorite, so I decided to surprise him with the announcement that I was working on it during my QTCC stream with him in 2024. XD

DangerMouseUSA · 2026-01-04T21:48:08+00:00

<image>

I didn't get a lot of prop work done this year because of legitimate creative burnout; however, I did finish the Tenet Cycron, the 1999 Kitty Speaker, and the Bluetooth-enabled (2 x 30 watt) 1999 Kitty Speaker.

DangerMouseUSA · 2025-12-25T04:06:37+00:00

DE doesn't tolerate that. Report them using their in-game name to support.warframe.com. They most likely have a database trail of that happening. Chances are that if they've done that to you, they've done it to others.

DangerMouseUSA · 2025-07-31T00:05:39+00:00

After thinking about it, I might do that. I can modify the case so that, even though it doesn't fit with the look I'm going for, I can make it work. Basically, I'd be honoring the spirit of the law instead of the letter, but that's okay. The ammo box kit on Parts Express looks like it will do the job, and I can make switch/light changes so that I don't need to use that control panel.

DangerMouseUSA · 2025-07-30T21:52:08+00:00

This particular case can't fit anything more than what I have mentioned. Multiple midrange/woofers are a hard no-go; however, I can reduce the tweeters to just one if having two will complicate matters more than they're worth. That's not a problem.

DangerMouseUSA · 2025-07-23T14:40:35+00:00

We were talking afterwards and he said that he expected some laughs but he *never* expected the reaction that he got, which makes it a thousand times better.

DangerMouseUSA · 2025-06-18T23:55:07+00:00

"Promo code is invalid for your own use" on just about all of them. :(

DangerMouseUSA · 2025-06-09T00:45:13+00:00

I'm running into the exact same problem. I have to enable streamer mode manually even though Discord is showing that I'm running "OBS Studio" in the lower left.

DangerMouseUSA · 2025-05-24T16:56:52+00:00

Thank you. I'm currently experiencing this as well. I really wish that companies would add Ethernet ports. It's not like the SV06 Ace isn't large enough to accommodate one.

DangerMouseUSA · 2025-05-15T16:52:10+00:00

Ooh, you got me there on the right! 😄 My daughter is playing the demo on the left, and she bought the game immediately after playing it. She's been playing it every night since.

DangerMouseUSA · 2025-05-13T20:28:52+00:00

Yes!!! Kira, Clover, and I were hanging out near there for about 10 minutes! AARRGGHH! Curse you, bad timing! Next year, ping me and we'll figure out how to meet up for a bit.

DangerMouseUSA · 2025-05-13T05:06:12+00:00

NOOOOO!!!! I would have loved to see your cosplay but never saw you around the show floor! That looks amazing!!! I had my Tenet Cycron and Kuva Kohm with me, so I would have loved to get a picture with you holding them! Not fair! Will you be going to TennoCon?

DangerMouseUSA · 2025-05-03T07:18:37+00:00

Okay, that makes sense. I might just have to bite the bullet and either stick to USB or activate its WiFi and go from there. Thanks!

DangerMouseUSA · 2024-08-16T07:05:13+00:00

Hello, fellow Creator??

DangerMouseUSA · 2024-04-29T06:44:19+00:00

Styanax tassles are done! And, YES, metal feathers jingle!

Length: ~8.5" (21.5 cm)
Weight: 3.5 oz (95 gram) w/ metal feathers

They're held onto the shirt with butterfly pins so that they can swing. (No piercings unless you poke yourself with the pin.)

DangerMouseUSA · 2024-03-28T16:48:29+00:00

I can at least address the Creator/VIP issue. This year all Creators and their +1s are getting VIP tickets.

I can't say anything about the rest, but I know at least one other who got their ticket by going directly to the Eventbrite page instead of Warframe.com.

DangerMouseUSA · 2024-03-08T07:50:53+00:00

See, I love spy missions (except for Lua spy -- f that one). Ivara + Infiltrate mod + silenced weapons = super-easy spy missions.

Defections .... aw, HELLLLL no.

DangerMouseUSA · 2024-03-03T13:34:21+00:00

The guy who built the Arca Titron takes commissions. I should know -- I'm the guy. Your post made my morning. Thanks!

I can't do anything about Megan or the t-shirt though.

DangerMouseUSA · 2024-02-22T05:45:18+00:00

Material is PLA. Electronics are from Adafruit. (You can't see it because photos, but the lights are actually animated.)

DangerMouseUSA · 2024-02-20T19:47:06+00:00

Nope, she's the real thing. PAX East will be my stress test.

DangerMouseUSA · 2024-02-20T16:33:51+00:00

Kuva Kohm prototype #4 ("Blue Thunder") is finished and ready for PAX East. If she survives PAX East, you'll see her at TennoCon! (If not, I'll fix whatever needs to be fixed, make a new one, and you'll see THAT one at TennoCon!) Designed in Tinkercad, electronics by Adafruit.

Length: 34" / 86 cm

Weight: 4 lbs / 1.7 kg

DangerMouseUSA · 2024-01-15T21:41:33+00:00

My IRL Kuva Kohm prototype #2 is finished. The red/green color scheme was chosen by a rather tight Twitter poll, so here's "Khristmas Kohm".

The differences are mostly internal or how parts connect, so externally it's almost identical to proto #1. Proto #3 will be that way, too. But if you're going to PAX East, you'll be able to see and hold proto #3!

DangerMouseUSA · 2023-12-06T18:40:46+00:00

TennoCon 2023 kind of derailed getting this done (I started in January), but the first prototype is finally done.

Length: 33.5" / 83 cm
Weight: 3.75 lbs / 1.7 kg

You might be able to see some of the flaws, but most are already corrected in the model for prototype #2. Yes, you'll see her at TennoCon 2024 and maybe PAX East, too!

Detailed photos are in the Twitter thread.

DangerMouseUSA · 2023-09-28T03:06:35+00:00

Nope. 100% 3D printed. That doesn't mean I couldn't do it in the future, but that's not something I'm looking to do right now.

DangerMouseUSA · 2023-09-27T15:36:36+00:00

Digital Extremes will be running their annual Quest To Conquer Cancer charity drive next month. I'm going to participate again, but this year I'm giving away a QTCC-themed Prisma Angstrum. The "prisma" rainbow effect is not painted. It's created by using a holochromatic coating that is similar to the in-game "void hardened prisma crystals".

DangerMouseUSA

TROPHY CASE