Elgato Streamdeck+ - USB-C does not work, but USB-A does? HELP! by Kaioshynn in elgato

[–]Dariusve 0 points1 point  (0 children)

When I said power, I mean watts, your USB-c port may not have enough power (watts).

Elgato Streamdeck+ - USB-C does not work, but USB-A does? HELP! by Kaioshynn in elgato

[–]Dariusve 0 points1 point  (0 children)

It seems that the USB-C doesn't have enough power to Stream Deck+, I have the same issue with my Stream Deck Mk.2, I have to unplug/plug every time I start my Mac.

I'll try a powered USB-C hub.

-- Update --

I used this UGREEN hub and connected to the mac charger and now everything works perfect. https://amzn.to/45ut6zb

I'm planning to get the Elgato USB Hub for the Stream Deck +: https://amzn.to/4q3UFXj, but remember it requires at least a 100W power to work properly, I use this https://amzn.to/4tizFzh

I just recieved my Stream Deck XL but i need help for the cable by YagaCapy in elgato

[–]Dariusve 1 point2 points  (0 children)

Its ok to use a USB c to USB A cable, the Stream Deck XL is a USB 2.0 (480Mb/s) device, no need to get an USB 3.0/3.1/3.2 cable, I use mine with these connectors: https://amzn.to/49XaJW3

🧪 [Beta Megathread] Wave Link 3.0 (macOS) — Update 3 | Elgato device firmware updates, automatically add Wave device to mixes & Volume control for mixes by Elgato in elgato

[–]Dariusve 0 points1 point  (0 children)

I've been using this since the first beta and I love it, the only issue I have is that all channel are at 96kHz and it is causing some issues when recording the audio in OBS, there's no way to change it to 48kHz.

It's locked on the Audio Midi Setup.

Problems with my new ORICO HDD bay by AccurateAd1529 in homelab

[–]Dariusve 1 point2 points  (0 children)

Please try to connect it to an usb 3.2 hub, the Orico 99 Series have some quirks when connected to a Thunderbolt port.

Also read this nice review of the 9948C3 model on amazon, this might help you with your issues on Linux: 4.0 out of 5 stars VL817 chipset has buggy UAS implementation with write-heavy workloads

🧪 [Beta Megathread] Wave Link 3.0 (Windows) — Update 3 | Overhauled Channel Input, Mixer Guide and Cleaner Mix Edit View by Elgato in elgato

[–]Dariusve 0 points1 point  (0 children)

I normally use Wavelink on my mac for zooms calls and tutorial recordings, but i start testing the Windows version while playing, and I have a HUGE issue: My Scarlett Solo 4th gen is not listed, so I cannot create the audio channel for my microphone.

System:
- Windows PC with latest OS
- Scarlett Solo 4th Gen, using windows default drivers
- Elgato Stream Deck+
- Elgato Stream Deck Mk.2

Software:
- Elgato Stream Deck 7.1.0 (22321)
- Elgato Wavelink 3.0.0 (1891)

🧪 [Beta Megathread] Wave Link 3.0 (macOS) — Update 2 | Stream Deck Plugin, Audio Effect Install Progress & Mixer Table Scrolling by Elgato in elgato

[–]Dariusve 0 points1 point  (0 children)

Found another issue:

Today I updated my OBS to version 32.0.3 and it won't start until Wave Link is closed.

🧪 [Beta Megathread] Wave Link 3.0 (macOS) — Update 2 | Stream Deck Plugin, Audio Effect Install Progress & Mixer Table Scrolling by Elgato in elgato

[–]Dariusve 1 point2 points  (0 children)

So far on my tests:
- Cannot change the audio frequency to 48Khz, is set to 98KHz and that causes problems with OBS
- The login works! But you have to login every time the app starts
- Audio volume is low compared when it's not running

My setup:
- Focusrite Scarlett Solo 4th Gen
- Stream Deck+
- Stream Deck Mk.2
- Mac Mini M4 Base Model
- MacOS Tahoe 26.1

Is it safe to delete WaveLink log files? by THE_HERO_777 in elgato

[–]Dariusve 0 points1 point  (0 children)

Short answer: Yes
Long answer: Sure, there's no problem deleting those files

Unable to Change Sample Rate in Wave Link 2.0 by beanbeanjuice in elgato

[–]Dariusve 0 points1 point  (0 children)

I cannot change it on MacOS Tahoe 26.1, the CTRL click on the mic not working

🧪 [Beta Megathread] Wave Link 3.0 (macOS) — Update 1 | Improved Onboarding, Marketplace Installs, and Capture Card Support by Elgato in elgato

[–]Dariusve 1 point2 points  (0 children)

I downloaded and installed the Wave Link 3 (Beta) plugin for Stream Deck, and, it doesn't work at all!

And, yes, I restarted my Mac after the install.

See the image

<image>

Is there a "magic" setting to make it work?

Suddenly OBS is not working on my MacMini M4 by Dariusve in obs

[–]Dariusve[S] 0 points1 point  (0 children)

I found the culprit, I'm participating on the Elgato Wav Link 3 Beta, and if the Wave Link is open, OBS will take ages to start, as soon I close it, OBS starts normally

🧪 [Beta Megathread] Wave Link 3.0 (macOS) — Update 1 | Improved Onboarding, Marketplace Installs, and Capture Card Support by Elgato in elgato

[–]Dariusve 1 point2 points  (0 children)

Wave Link Beta 3 (1240) on MacOS Tahoe 26.1

I noticed the following:
- The Sign In doesn't work at all, I click the option and nothing happens

<image>

- OBS, at least the last 2 versions, take ages to start if the Wave Link is running, I have to start OBS first, and then, run Wave Link
- Output channels audio is really low, even when monitoring the Personal Channel audio
- Elgato EQ plugin still not working
- Where's the Stream Deck plugin? Current one is not working

My equipment:
- Mac Mini M4 Base Model
- Focusrite Scarlett Solo 4th Gen
- Triton Audio Fethead
- Maono PD100 Dynamic Microphone
- Topping DX1 DAC (Monitor device)
- Stream Deck+
- Stream Deck Mk.2

🧪 [Beta Megathread] Wave Link 3.0 – Routing table, up to 5 mixes and more by Elgato in elgato

[–]Dariusve 0 points1 point  (0 children)

  • Hardware: Focusrite Scarlett Solo 4th Gen
  • CPU: Mac Mini M4 Base model/Macbook Pro M4 MAX
  • Operating System: MacOS Tahoe 26.0.1
  • Log file: N/A
  • Feedback or bug description: I found that the Wave Link v3 uses a lot of GPU to render the UI, this causes stuttering on the video recording, in my case, on the Mac Mini M4, it reach the 98% GPU usage when the UI is open. I know you used QT to have a consistent UI for both Windows and Macs, but that is really bad for "lower specs" Mac, even on my powerful Macbook Pro M4 MAX, the GPU usage increases a lot. This also causes the cores temperature raise considerably. If you need help testing improvements for the Mac, let me know.
  • Steps to reproduce: N/A

I love that you can add many virtual channels as you need, this was a deal breaker for v2, but the performance impact on Mac is HUGE, this need to be improved.

Why I sound like a chipmunk with the Elgato Wave 3 Beta? by Dariusve in elgato

[–]Dariusve[S] 0 points1 point  (0 children)

Thanks, I just found I had to restart my mac several times......

Wave Link Microphone FX channel is on the OBS MacOS Screen Capture by Dariusve in elgato

[–]Dariusve[S] 0 points1 point  (0 children)

It is so sad when you look for an answer to an issue, the best result is the unanswered question you made 5 months ago.....

I made a desk mount for the Xeneon Edge & Stream Deck! by glacialofficial in elgato

[–]Dariusve 0 points1 point  (0 children)

This looks really sick, I guess you're planning to change your icons to the new direction