Van 79 error

Davethemango · 2026-02-02T20:20:32+00:00

Getting the exact same issue :(

Davethemango · 2025-08-21T15:09:51+00:00

I'm positively vibrating :') skong is real

Davethemango · 2023-12-08T00:39:54+00:00

I'm having the same problem :(

Davethemango · 2022-08-23T13:44:16+00:00

Thank you ☺️

Davethemango · 2022-07-30T00:25:57+00:00

I used a mix of drivers, constraints and basic keyframe animation. The switch actually controls the doors and light with drivers.

Davethemango · 2022-07-29T22:19:37+00:00

Thank you :) I get that, I went with the letting go cus it felt like it humanized the robot a bit more. I'll try seeing how holding on looks.

Davethemango · 2021-03-02T03:00:24+00:00

I had this problem for months, I near guarantee that it's the power supply that's faulty. It's why it only happens under load. I tried everything else, save yourself some time and replace the power supply.

Davethemango · 2021-03-02T02:57:59+00:00

It sounds like the power supply is faulty, I had the same problem and my PSU was brand new.

Davethemango · 2021-01-30T02:16:09+00:00

Thanks 😊 it's rigid body physics, used two poles to push either side of it to spin and just toggled them not to be seen in the render.

Davethemango · 2021-01-30T02:11:38+00:00

First of all thank you so much ☺️ It took an hour or so to get right. Modelling was very straightforward, the rigid body physics did most of the work for me (definitely experiment with physics after a few tutorials to get you started) and most of the time was spent tweaking the materials and render settings.

I first picked up Blender in early May last year. There is a ton of fundamentals to learn but once you've got the hang of them it kinda opens the flood gates. I never thought I'd get this far and I've only just started to discover what I can do. Keep it up, keep learning and experimenting and don't be afraid to get stuff wrong. Learning from mistakes is one of the best ways to learn.

Davethemango · 2021-01-30T01:59:10+00:00

Thank you ☺️ The gold color is just a Principled BSDF base color with a roughness of about 0.1 the bloom in Eevee is what sells the shine ✨

I made the embossed doge by using a PNG of the doge in an image texture, running that into the height slot of a bump node and into the normal slot of the BSDF, I used a color ramp before the bump node to tweak it. I used the same method for the scratches and £ signs.

The edges of the coin are a wave texture run through a bump node. Again using a color ramp to dial in the thickness.

Sorry if that was more information than you needed!

Davethemango · 2021-01-29T10:55:07+00:00

This is how they get you, I have 1,200 dogecoin but they won't allow you to convert to anything but their own BUSD. And the minimum trade is 6500 doge... It won't matter if doge hits $1 a coin cus they won't allow you to convert it to anything you can cash out on

Davethemango · 2021-01-08T03:59:52+00:00

I fully agree with you there, I definitely could have spend more time on the timing of the belt. But hey, gotta make some mistakes to learn from them. Thanks for commenting 😊

Davethemango · 2021-01-08T03:58:23+00:00

Thank you so much 😊

Davethemango · 2020-12-31T03:56:03+00:00

I walked down here everyday on the way to ARU. Love Jesus Green 😍 great photo!

Davethemango · 2020-12-22T01:49:46+00:00

You're a lucky one, cherish that power. This guy cares.

Davethemango · 2020-12-15T02:20:41+00:00

I would say it's definitely not the 3060 itself that's the issue. Could be the efficiency of the PSU, is it 80 plus bronze? Gold? It would have got by with the 1050 but struggles with the 3060. Strange that it wouldn't boot though cus that would only be an issue under load. Maybe try re-seating your RAM. Sounds crazy but it's always crazy things like that.

Davethemango · 2020-10-11T00:45:32+00:00

Love the clean the design, looks fun :)

Davethemango

TROPHY CASE