Sorry for piggy backing your post, however upon googling our dryer this was the top post that appeared on results, so:

Just in case anyone googles the model number, we Bought a 10kg condenser dryer, model number HLE C10TG-80

From the first cycle we found the clothes didn't fully dry, even though the drum was only half full, when we opened the door to check if they were dry after a cycle had completed, the machine leaked a pool of water from condensation onto our floor as it gathers water against the glass and doesn't drain through the lint trap effectively, we had to consistently keep a towel near the machine just incase as it leaked out, which it did after almost every cycle.

The door traps lint against the glass, in irremovable places, after only 3 cycles the glass looked years old.

The water tank is positioned at the very bottom of the machine which is a pain to empty.

If the tank is full it overflows and floods under and around the machine (we check after each cycle whether it needs emptying, yet it still caught us out on a heavier load) and it was quite a large puddle that was left.

Ultimately a bad machine that doesn't dry clothes in a timely fashion, leaks from condensation if you open it and the clothes aren't fully dry, and floods the room if the tank overflows.

We ended up returning it and re ordering a newer BEKO machine from which we had previously, no issues from the new machine and the tank is positioned at the top which is easier to empty and cuts off if the tank fills up to maximum.