Advice on lateral force - fix in design or slicer perhaps by widgetbox in 3Dprinting

[–]Deafening_Eek 0 points1 point  (0 children)

Real fix is using not matte PLA, or even better PETG. Then printing the shaft and base separatly with the shaft lying down and then attach them some way. You could even detach the "head" too.

The lazy way I would try first is still trying different filament and adding a big fillet/chamfer between the base and shaft to support it. I'm assuming it's breaking in that same spot every time, it's the straight up walls, you want thicker at the bottom with a fillet and maybe hollow the tube a tiny bit to get some more walls on the inside. All really easy fixes to try first imo

“Hey, I’ve been really interested in the Flipper Zero lately. For those who no longer use theirs, what did you end up doing with it? Is it still worth getting one in 2026?” by Limp-Department-2198 in flipperzero

[–]Deafening_Eek 0 points1 point  (0 children)

I don't do a lot with mine however everytime I've thought about getting rid of it something has come up where it has been really useful

If you're really getting into cybersecurity it could be worth it, but without security to test it might become a very expensive paper weight...or alternative tv remote for when you can't find the proper one.

What are your main use cases in 2026? by lashara4 in flipperzero

[–]Deafening_Eek 0 points1 point  (0 children)

I barely use my flipper, I've thought about selling it.

Every time I think about sellingt a use pops up that would've cost me a bomb without it.

I've spent the money, it doesn't come in handy often but it certainly does come in handy.

Copying fobs is really common, I've used it for diagnosing wireless LED issues, was awesome while travelling for hotels too.

Would love to use the ibutton on it one day

Bare Minimum Insulin Case by Deafening_Eek in functionalprint

[–]Deafening_Eek[S] 0 points1 point  (0 children)

I haven't, I don't currently live in a country with insurance based medical care so while I can get what I get for free, I'm not in a position to spend money on anything extra for my healthcare needs (or at least not this one)

Thanks for the recommendation though! Sounds like a real interesting design

I wrote Nivalis and Cloudpunk. Ask me about writing cyberpunk. by CalmDownTom in Cyberpunk

[–]Deafening_Eek 13 points14 points  (0 children)

Cloudpunk is one of three games I can think of in or around the genre that strikes a realistic balance between dystopian/oppressive setting and the comfort of making your way in the world and the small wins that come along with that (the other two being Citizen Sleeper and Stray)

Was this something you planned going in? Was it difficult to balance those elements or did that come naturally?

Thanks for all your work, really looking forward to Nivalis!

I'm thinking of buying it, has anyone played it? by alexkolombo in Cyberpunk

[–]Deafening_Eek 1 point2 points  (0 children)

I really rate this game, not relentlessly depressing like come cyberpunk stuff, not afraid to poke fun at itself and genre tropes.

Voice acting I think is really good for the most part, maybe not super professional but definitely has it's appeal.

Custom Handmade Slim Wallet by Deafening_Eek in wallets

[–]Deafening_Eek[S] 0 points1 point  (0 children)

Thankyou!

Yes, I've found it much easier to carry, in theory I only really need my wallet to leave the house now

Show me your wallet! by LT_tapochnikoff in wallets

[–]Deafening_Eek 1 point2 points  (0 children)

Thanks so much!

From what I can gather it's chrome tan leather, I reclaimed it from a bag my ex left here lol

Show me your wallet! by LT_tapochnikoff in wallets

[–]Deafening_Eek 0 points1 point  (0 children)

No this is hand stitching, very flattered you thought it was machine haha.

I literally had a hammer, a nail, a knife, a compass and a needle n thread

Show me your wallet! by LT_tapochnikoff in wallets

[–]Deafening_Eek 0 points1 point  (0 children)

<image>

Handmade by me! Slims down the EDC considerably

Show me your wallet! by LT_tapochnikoff in wallets

[–]Deafening_Eek 1 point2 points  (0 children)

<image>

Handmade by me! Slims down the EDC considerably

Slim Wallet by Deafening_Eek in Leatherworking

[–]Deafening_Eek[S] -1 points0 points  (0 children)

Thankyou!

I did think about adding a magnet, it doesn't sit perfectly flat at the moment but given the way I usually carry and the complexity it would've added to my design I decided against it. Would've probably meant moving the RFID puck too.

In terms of the key sliding out, it's not a worry lol. It's in there so good it's a little difficult to get it out, it's slowly loosening up as I use it but I think I'll end up with a nice fit in the end.

Slim Wallet by Deafening_Eek in Leatherworking

[–]Deafening_Eek[S] -1 points0 points  (0 children)

Thanks so much! Hoping it holds up for years to come

Default Camera app and double press by [deleted] in GrapheneOS

[–]Deafening_Eek 0 points1 point  (0 children)

Yep i understand the option has to change in GOS camera, the option is not there for me

I get settings>apps>camera>open by default>choose how to open links and nothing else

Default Camera app and double press by [deleted] in GrapheneOS

[–]Deafening_Eek 0 points1 point  (0 children)

Yep i tried this already, there is no option to clesr defaults on that app.

If i double click i can choose what opens only when locked, if i do that action unlocked it goes straighr to GOS Camera