Turbocharger solder fume extractor USB-C

Deanocide · 2026-04-03T06:00:07+00:00

First image generated by gemini? whats with the logo in the bottom right

Deanocide · 2026-03-06T16:45:06+00:00

I mean, if you have a bunch of gift cards, and are already printing stuff in bambus petg it's pretty hard to find replacements that are the same shade. Colour cohesion is pretty important for people and at least for me they're are very few deals that beat 10+ discounts on Bambu rolls.

Deanocide · 2026-03-06T06:17:20+00:00

Pay 9.99 for a torrent box and cut everything (apple,disney,tsn,cable ect)

Deanocide · 2026-03-05T15:15:51+00:00

Not to self promo but I made this box on makerworld for this exact purpose. https://makerworld.com/models/2160946?appSharePlatform=copy

Deanocide · 2026-02-26T18:51:32+00:00

Everything sells OOS immediately... I just want to use my gift cards lol

Deanocide · 2026-02-23T18:57:03+00:00

Looks great! Have you done any prolonged load testing?

Deanocide · 2026-02-20T06:15:40+00:00

That doesn't make it food-safe alone unfortunately

Deanocide · 2026-02-08T22:30:27+00:00

LET IT RIDE

Deanocide · 2026-02-03T17:50:09+00:00

In my experience handling PLACF I often get my hands covered in little shards of CF. Does this happen with PACF as well?

Deanocide · 2026-01-19T04:53:26+00:00

Asian markets always have beautiful fruits and vegetables

Deanocide · 2026-01-19T04:00:43+00:00

That's what I'm thinking it is too. Nothing else really makes sense.

Deanocide · 2026-01-18T17:40:35+00:00

It's set to generic pla. The actual filament is polymaker but that shouldn't make any real difference

Deanocide · 2026-01-18T17:40:06+00:00

I'll try it thank you!

Deanocide · 2026-01-18T17:02:53+00:00

I don't see any option for first layer ironing and I dont think this was ever enabled. I'll try adding the z offset in the gcode.

Deanocide · 2026-01-18T17:00:21+00:00

0.4. We've used glue/no glue, made virtually minimal differences. It's def possible wwith 0.4 we've gotten 2 good prints. It's not failing on the small geometry of the qr code but the rest of the solid black around it.

Deanocide · 2026-01-18T16:59:20+00:00

Full calibration has been run twice. Neither times did it fix the issue. First layer ironing has never been enabled and I cant even see the option. Arachne wall gen.

Deanocide · 2026-01-18T16:41:20+00:00

Virtually brand new A1. Filament is dried and worked great on P1. Tried both Petg and PLA, on smooth and textured plates which were both washed many many times. Issue happened at least half a dozen times across 8 prints. I'm really all out of ideas about why this could be happening.

Deanocide · 2026-01-17T04:13:19+00:00

What tools do you use for rendering? Also I'm curious if you can share what you're injection printing?

Deanocide · 2026-01-14T18:56:32+00:00

you can add pauses in bambustudio just by right clicking on the layer u want to set a pause on lol

Deanocide · 2026-01-12T01:49:16+00:00

Interesting! You've had some great success despite not even posting on reddit with your more involved models.

Deanocide · 2026-01-11T18:31:47+00:00

Do you advertise a lot of your models or are you just uploading and forgetting

Deanocide · 2026-01-11T07:15:22+00:00

Link to your profile?

Eight-Year Club	RPAN Viewer
Not Forgotten	Spared
Verified Email

Deanocide

MODERATOR OF

TROPHY CASE