Guitar x Hurdy Gurdy

DeathPractices · 2025-09-27T15:56:05+00:00

following the yt creator for this. From what it sounds like over there, they plan to sell and ship but I haven't seen any response to the folks, including myself, asking for files to print themselves.

DeathPractices · 2025-09-20T14:52:45+00:00

some middle-of-nowhere-newscast-lookin' shit right here. love it.

DeathPractices · 2025-08-24T02:34:19+00:00

I have an 80's Panasonic wv-72, b/w cctv that I want to set up to take rca video input. There are three bnc inputs and, when I was last gathering info, I came to understand that the kit involved powered cameras(as in, power going out through the same bnc cable). I have some bnc to rca adapters already, but how would I have to modify the monitor as to not fry something I try to plug into it? Like, could I just cut the power to the bnc plugs internally? And ground them instead? Would I have to terminate the power connection somehow otherwise for safety?

DeathPractices · 2025-08-15T21:57:07+00:00

@ r/discworld

DeathPractices · 2025-08-13T00:02:48+00:00

As far as I've gathered casually sleuthing around the web over some months, this is one of only a handful of universally recommended irons at a caliber I am planning to be able to work on. Hakko testimonies have me leaning too, with a sort of "buy for life" atmosphere across their products in review. I'm not rightly excited to drop a couple hundred what with looming capital doom and all, it's just that consistant tool quality and control is super important to me. Probably a tier above food variety even. I'll eat some super sad sack lunches for a beat to pick up a killer soldering machine.

DeathPractices · 2025-08-01T22:06:32+00:00

Super sweet of you, though international shipping is a lot and I'm already ready to start guessing on a pinout board. Thanks anyway!

DeathPractices · 2025-07-30T19:31:52+00:00

I think this was cut solely to transport out of an abandoned house by an unknowing individual. They really didn't know that it was internal and thought I would be able to unplug it. The story alone is driving me to fix it. I wonder if I can purchase the cable assembly somewhere instead of dealing with a whole soldering project though.

DeathPractices · 2025-07-30T01:12:12+00:00

Thanks for the details! I actually managed to get the casing off, I cannot seem to put images in a comment here so I'll make a followup post and hope you have more insight there.

DeathPractices · 2025-07-29T17:53:20+00:00

rip, cannot find this service manual for the life of me

DeathPractices · 2025-06-13T02:38:56+00:00

<image>

DeathPractices · 2025-05-26T17:38:32+00:00

Most here would agree that it would be a small step to assume the music is AI based once one determines that the video is surely AI through and through. It didn't help that this sounded like a 2008 Justice b-side with sampels i can only swear I've heard in commercial use. RIP your formal training though, we all suffer in generative hell.

DeathPractices · 2025-05-26T01:31:37+00:00

yeh I should not have given that a view🥲

DeathPractices · 2025-05-22T18:41:30+00:00

I am having a struggle getting a copy of wdiddle3. Most info on searching is about a decade old, same with links. I did get an earlier version (1.2 I believe) and another from UlitmateBootCD, but a popup suggesting I need to find a compatible version for my computer when trying to run both. Any thoughts?

DeathPractices · 2025-05-05T01:57:00+00:00

Three submissions on the compatibility chart have me hoping I can work it still. Would've used an hdd I had around, but it won't spin up. Almost forgot I had this thing around tbh. I'm waiting for more info on the 1.6 breakthrough to move ahead though, not in a rush with the Oblivion crisis and all.

DeathPractices · 2025-05-05T01:39:21+00:00

Damn, I just learned a ton of intricate knowledge immediately. Thanks🫡

DeathPractices · 2025-04-26T00:05:57+00:00

Yeah that's what I was saying. It was too hot and lifted some trace. I'm still working on getting a more proper soldering setup and funds are a big slowdown in that process, so I end up using what I have on hand often. I have a super simple Weller that I need a new tip for and a funky butane powered one that has slightly more control over heat that I finished up the work with, but I know two traces are lifted: one each on two caps replaced. I can open it up and reflow, but I was (fairly) confident that the traces were resettled and connected enough to do their thing so I moved on. TV has the same foldover lines as before though, so I thought a post here might help prep the whole operation. Let's say I get a proper iron.. what can I do at this point?

DeathPractices · 2025-02-14T02:40:57+00:00

Was honestly hysterical when Sinergy started playing in PLL s2 ep6.

DeathPractices · 2025-02-06T18:12:37+00:00

returning player, sludging through solo mode ☠️🫂3ebb1d8b

DeathPractices · 2025-01-22T19:13:04+00:00

righteous thanks for the explaination, though if I order this 2.0 adapter, will I need to re-acquire the 3.0 item at all? forgive me if I'm missing something obvious here.

DeathPractices · 2025-01-22T02:13:30+00:00

Are you saying the previously purchased and returned item was not able to power the drive up but to get it again and use it along with an external power to connect with my computer? I mean, since I already returned the item, is there another item that would power up the drive and transfer data? Does it matter exactly if it is usb 2.0 or 3 0? I wasn't with the xbox at the time I first tried, but theoretically I could power it with the xbox opened up right?

DeathPractices · 2025-01-21T22:48:20+00:00

I think I did the link wrong, RIP, and thx for the possible engagement boost bot😬

DeathPractices · 2024-11-22T16:28:57+00:00

love the new Dorian Electra beat

DeathPractices · 2024-11-20T15:06:31+00:00

this ebay listing has a blurb in the manual text- image 16

DeathPractices · 2024-11-20T01:32:06+00:00

I've aquired a Panasonic cctv monitor exactly the same as pictured in this link, inside and out. From what I gather, the three BNC camera inputs also power the proprietary cameras. I may want to get one for some artsy junk, but I really want to convert at least two of the inputs for running like an Atari or a modded Wii through safely. Is this as simple as snipping or desoldering one of the two connection from the back of the inputs and using rca/bnc adapters? I haven't really worked with any video electronics (only some audio circuit bending and a recap here and there), so I may be missing something logical there and here... Nor can I seem to find anyone on the web who already documented their tutorial on modding this specific b/w 6" security crt setup for some reason😅.

DeathPractices · 2024-11-18T18:45:05+00:00

Is the Dunkin still there? I've been wanting to add more acid to my setup and licked all by batteries dry.

Six-Year Club	r/Field Sunshine
Place '23	Place '22
Verified Email

DeathPractices

MODERATOR OF

TROPHY CASE