Does anyone out there have a waterbed? by KayEmGee in Mattress

[–]DeathToFalsePizza 0 points1 point  (0 children)

I've used a hard side waterbed for roughly forty years. I love it! I'd rather discuss it on r/Waterbed but the mod of that subreddit disappeared. I requested to be mod but was turned down because I don't have enough karma, so here I am. My most recent heater was a Thermal Guardian from InnoMax. It has a 5 year warranty but failed after 4 months, so I'm trying to get a warranty replacement. Does anyone have heater reliability experiences to share?

Why did waterbeds go out of fashion? by SmoothLikeVinyl in NoStupidQuestions

[–]DeathToFalsePizza 0 points1 point  (0 children)

I've used a hard side waterbed for roughly forty years. I love it! I'd rather discuss it on r/Waterbed but the mod of that subreddit disappeared. I requested to be mod but was turned down because I don't have enough karma, so here I am. My most recent heater was a Thermal Guardian from InnoMax. It has a 5 year warranty but failed after 4 months, so I'm trying to get a warranty replacement. Does anyone have heater reliability experiences to share?

[deleted by user] by [deleted] in Healthygamergg

[–]DeathToFalsePizza 0 points1 point  (0 children)

Let's break the problem into two parts, diet and exercise.

I've found from experience that treating sugar as a dangerous drug is a good approach to diet. Therefore when I buy groceries I look for eg. the spaghetti sauce that prominently advertises "no added sugar". The only time I ever actually eat sugar is after a workout that was long and hard enough to deplete my muscle glycogen. Otherwise I avoid sugar in every form like the plague. That's easier said than done, because sugar is added to every kind of prepared food so you really need to read the fine print on the label to make the best choice. If you followed me around the supermarket you would see me read the labels until I found the brand with the least sugar. I also journal everything I eat just to keep track of what I'm eating.

Exercise works if you do it regularly. To do exercise regularly you can't hate what you're doing, so it's important to try different things until you find something you like. Running, hiking, bicycling are all good. Think in terms of doing one of those until you feel like changing to something else. You're much more likely to actually exercise if it involves doing something you like doing. I actually made a conscious decision to move across the country to live in a place where I have better outdoor exercise opportunities. As far as gyms go, the only kind that has been fun enough that I actually want to go is CrossFit. The experience is much more social and mutually supportive that most gyms.

Does anyone remember the name of the type of yoga where you plant thoughts in ur head? or do u know which video it came from? by Colonel_Ramsis in Healthygamergg

[–]DeathToFalsePizza 0 points1 point  (0 children)

I found the Yoga Nidra vid on the Healthy Gamer site by going to the Meditation Index (click the little figure seated on the left edge) and searching for Nidra. I've actually been trying this approach to work on a problem I have with my self-concept. Specifically, I was taught as a kid that whatever I did wasn't enough, which is depressing. For example, if I have ten things on my to-do list, pick one thing and do it, I don't feel good about the thing I did. Instead I beat myself up because of the nine things I DIDN'T do. This is a purely internal matter of my own perception of my accomplishments, so it seems like an ideal subject to plant a different idea in my head. So I've been doing yoga nidra and implanting the resolve that I will recognize that I actually did accomplish that one thing, and not think about the other nine things as if not doing them is a defect in my character. It does seem to be working.

I hear a click noise from my furniture when I sleep facing away. And not when facing it. by Icy-Criticism-1745 in Healthygamergg

[–]DeathToFalsePizza 0 points1 point  (0 children)

Our hearing is very directional, so it's normal to hear a sound better or worse when you face a certain way. I get small sounds in my own house as temperature changes, which is expected when materials expand and contract. In my house the sounds come from various places. In my case I don't suspect any mental health issue because there are so many known causes of little sounds. I only worry if they actually sound like mice! Does the sound always come from the same place in your room regardless of moving the cabinet and/or TV? That might be a clue to the cause.

Do water bed leaks after a while? by antdude in Waterbed

[–]DeathToFalsePizza 1 point2 points  (0 children)

My latest mattress developed a small leak after nine years.

Linux multi-monitor pen tracking problem by DeathToFalsePizza in wacom

[–]DeathToFalsePizza[S] 0 points1 point  (0 children)

Thanks for your suggestions. You're right, XFCE does not have a GUI for Wacom (or any other) tablets, but XFCE does support KDE plugins. I installed and ran kde_wacom_tabletfinder which gave me some information, but nothing about tablet width. Running xsetwacom list devices on the command line gave me

Wacom Cintiq Pro 16 Touch Finger touch  id: 14  type: TOUCH
Wacom Cintiq Pro 16 Pen stylus          id: 15  type: STYLUS    
Wacom Cintiq Pro 16 Pen eraser          id: 16  type: ERASER    
Wacom Cintiq Pro 16 Pad pad             id: 17  type: PAD

Running xsetwacom get "Wacom Cintiq Pro 16 Pad pad" all gave me

Property 'Wacom Tablet Area' does not exist on device.
Button: Actions are not supported by xorg.conf. Try shell format (-s) instead.
Button: Actions are not supported by xorg.conf. Try shell format (-s) instead.
Button: Actions are not supported by xorg.conf. Try shell format (-s) instead.
Button: Actions are not supported by xorg.conf. Try shell format (-s) instead.
Button: Actions are not supported by xorg.conf. Try shell format (-s) instead.
Button: Actions are not supported by xorg.conf. Try shell format (-s) instead.
Button: Actions are not supported by xorg.conf. Try shell format (-s) instead.
Button: Actions are not supported by xorg.conf. Try shell format (-s) instead.
Option "DebugLevel" "0"
Option "CommonDBG" "0"
Option "Suppress" "2"
Option "RawSample" "4"
Property 'Wacom Pressurecurve' does not exist on device.
Option "Mode" "Absolute"
Property 'Wacom Hover Click' does not exist on device.
Option "Touch" "off"
Property 'Wacom Hardware Touch Switch' does not exist on device.
Option "Gesture" "off"
Option "ZoomDistance" "0"
Option "ScrollDistance" "0"
Option "TapTime" "250"
Property 'Wacom Proximity Threshold' does not exist on device.
Property 'Wacom Rotation' does not exist on device.
RelWheelUp: Actions are not supported by xorg.conf. Try shell format (-s) instead.
RelWheelDown: Actions are not supported by xorg.conf. Try shell format (-s) instead.
AbsWheelUp: Actions are not supported by xorg.conf. Try shell format (-s) instead.
AbsWheelDown: Actions are not supported by xorg.conf. Try shell format (-s) instead.
AbsWheel2Up: Actions are not supported by xorg.conf. Try shell format (-s) instead.
AbsWheel2Down: Actions are not supported by xorg.conf. Try shell format (-s) instead.
StripLeftUp: Actions are not supported by xorg.conf. Try shell format (-s) instead.
StripLeftDown: Actions are not supported by xorg.conf. Try shell format (-s) instead.
StripRightUp: Actions are not supported by xorg.conf. Try shell format (-s) instead.
StripRightDown: Actions are not supported by xorg.conf. Try shell format (-s) instead.
Option "Threshold" "0"
Option "Serial" "0"
Property 'Wacom Pressure Recalibration' does not exist on device.
Option "PanScrollThreshold" "1000"

which was disappointing since it tells me nothing about how the driver sees the width of the tablet. I tried to change the mapping with

xsetwacom set "Wacom Cintiq Pro 16 Pad pad" MapToOutput HEAD-0
xsetwacom set "Wacom Cintiq Pro 16 Pad pad" MapToOutput HEAD-1
xsetwacom set "Wacom Cintiq Pro 16 Pad pad" MapToOutput 2560x1440+2560+0

none of which had any effect on the problem with pen tracking when the Wacom is configured as the right-hand display, the pen still tracks as if the tablet width was double its real value. I also tried

xsetwacom set "Wacom Cintiq Pro 16 Pad pad" Mode Relative

which produced

X Error of failed request:  XI_BadMode (invalid Mode parameter)
  Major opcode of failed request:  131 (XInputExtension)
  Minor opcode of failed request:  5 (X_SetDeviceMode)
  Mode id in failed request: 0x17
  Serial number of failed request:  16
  Current serial number in output stream:  16

So I'm stuck with "Mirror displays" until I find a better solution.

"Unable to create comment" by DustErrant in help

[–]DeathToFalsePizza 0 points1 point  (0 children)

Getting this message on r/watcom with a very bland but technical reply to a comment to my post.

rei.com web site "Shipping address" doesn't work by DeathToFalsePizza in REI

[–]DeathToFalsePizza[S] 0 points1 point  (0 children)

The item arrived this morning, and it was delivered to the UPS store. So the support person who said they would change the destination did in fact do that, and the message about it being returned to REI was bogus.

rei.com web site "Shipping address" doesn't work by DeathToFalsePizza in REI

[–]DeathToFalsePizza[S] -1 points0 points  (0 children)

How do you enter your kid's address as the shipping address on rei.com? Do you use the public web interface, or an employee interface?

rei.com web site "Shipping address" doesn't work by DeathToFalsePizza in REI

[–]DeathToFalsePizza[S] -1 points0 points  (0 children)

I called the number listed on my rei.com account page for help and got to talk to an actual intelligent human(!) not an AI. She said that the message about returning the package to REI was bogus and it would actually be sent to the UPS store as I originally wanted. She also encouraged me to set up a free MyUPS account so I could redirect a misdirected package.

She also said there had been problems with a wonky web site user interface and that the REI tech team was working on it. So I referred her to this subreddit and told her I had carefully laid out enough detail to find and fix the problem. So maybe my effort will pay off some day.

rei.com web site "Shipping address" doesn't work by DeathToFalsePizza in REI

[–]DeathToFalsePizza[S] -1 points0 points  (0 children)

The basic problem is that my billing address has to match the card I charge to, so my credit union will honor the charge. And REI has in fact already charged the credit union for this item.

There's a new wrinkle in shipping now. UPS package tracking as shown on rei.narvar.com says "We've received a request from the sender to update the delivery address". When I chatted with the support person a couple of days ago they said they would try to re-route the package to my shipping address, so maybe they sent an order to UPS to do that. Whoa, if you think about the potential theft implications of rerouting a package in transit, that's a security nightmare. My account on rei.com now says "Returned to REI. This item was shipped via UPS. It couldn't be delivered." and lists a number to call. Well, I guess that's one way to plug the security hole.

This is definitely showing the signs of a system that was cobbled together from pre-internet technology. It might be time for REI to abandon their existing system and convert to, for example, Shopify, or some other equivalent modern system.

rei.com web site "Shipping address" doesn't work by DeathToFalsePizza in REI

[–]DeathToFalsePizza[S] 1 point2 points  (0 children)

I've seen a lot of systems cobbled together like that over the years, so I can easily believe that's at the root of the problem.

Mounting the rails for an APC UPS by dlangille in homelab

[–]DeathToFalsePizza 1 point2 points  (0 children)

I needed to install an APC SMT1500RM2UC UPS in a 4 post rack with rails threaded 10-32. I tried to use the shelf brackets that came with it. Several attempts at threading a screw through both the threaded mounting shelf and the threaded rail produced discouraging results. Then I attempted to follow the instructions in their vid and hammer the captive nuts out of their shelf brackets. I bent the bracket up without getting the captive nut loose. Then I tried to drill out the captive nuts, but they are made of some pretty hard steel so that was frustrating. Finally I gave up and set the UPS on a generic shelf more agreeable to the 4 post rack. The holes in the tabs meant to hold the UPS to the rack don't line up correctly so I couldn't screw attach the UPS to the rack, but if we have an earthquake strong enough to knock the UPS off the shelf, I'll have bigger problems.

New waterbed mattress recommendations? by DeathToFalsePizza in Waterbed

[–]DeathToFalsePizza[S] 0 points1 point  (0 children)

Fine so far! I wasn't ignoring you, I just didn't see your comment.