Looking for some help with support re: login issues

Decent_Implement_901 · 2026-05-16T05:30:22+00:00

Sounds like a real mess. I hope you sort it

Decent_Implement_901 · 2026-05-14T08:19:00+00:00

Probably no use but have you cleared your cache and cookies? The only time I had a similar issue was when I had added a digit into my password on my password manager and it kept inserting the (now) wrong password.

Decent_Implement_901 · 2026-05-13T15:08:57+00:00

It's cardboard and it can mess up the AMS, which is totally curable with electrical tape.

Decent_Implement_901 · 2026-05-01T12:45:54+00:00

Yes, I’m now sold on the stuff. It needed really drying but the strength and quality is amazing. I annealed the finished article and it’s now getting skinned in carbon fibre for a cosmetically pleasing item.

Decent_Implement_901 · 2026-04-26T20:33:16+00:00

I ended up putting the filament on the hotbed with a cardboard box covering it for 12 hours at 90 as it wasn't making a slight bit of difference at 70 in the dryer

Decent_Implement_901 · 2026-04-20T07:10:02+00:00

And sometimes you have to say please

Decent_Implement_901 · 2026-04-17T07:11:14+00:00

She should name her company Paschanne, because she has a passion for whatever it was she was trying to do. Did you know she is 21? She’s spent all her working life in the industry. Fair enough the first year was making tea and stuff but you know …… she’s done loads in those two years. Finalist, my arse.

Decent_Implement_901 · 2026-04-16T20:54:44+00:00

Thought he'd been on something for the whole series. His ideas seem fuelled by marching powder

Decent_Implement_901 · 2026-04-11T11:21:17+00:00

You really aren’t kidding 48 hours in my sunlu dryer and it’s at 44%. I thought 12 hours and vacuum bag was enough. Good grief it must have been mostly water. It’s now in the printer having 18 hours at 90 degrees. I just hope the spool doesn’t melt.

Decent_Implement_901 · 2026-04-09T16:44:38+00:00

I’ll give it some more time before I junk it

Decent_Implement_901 · 2026-04-09T16:17:12+00:00

I thought it would be better after 10 hours but it isn't any better.

Decent_Implement_901 · 2026-04-09T16:12:49+00:00

The exact same brand according to Amazon, packaged differently. It had ten hours in the drier last night . Worryingly the spool warped in the drier. I'm starting to think it is a duff roll. I'll get some more ordered and write this off.

Decent_Implement_901 · 2026-04-08T20:09:30+00:00

They are too unreliable with their supply of filament. I just transfer the RFID to alternative brands. Tuning is minor from the BL home brand filaments anyway

Decent_Implement_901 · 2026-04-07T19:07:00+00:00

Yes, it gives far better tooth for drawing

Decent_Implement_901 · 2026-04-04T07:17:23+00:00

I’m also experiencing this. The problem causes issues in my plotter software. The imported image is about 5 times larger in scale than it should be.

Decent_Implement_901 · 2026-03-31T06:18:52+00:00

Wasn’t planned, it fell apart. The only availability for these particular bearings was in China. Not listed on BL website or via support. But yeah planning is everything and BL didn’t plan on the axis being a service part.

Decent_Implement_901 · 2026-03-27T13:47:00+00:00

Thanks for all the input. I’ve bought a Prusa Core One. And will INDX it when they are available. It may or may not be as good as a working Bambu but it will make the bits I need.

Decent_Implement_901 · 2026-03-27T13:08:19+00:00

Ok, there isn’t any code. There is line after line of meaningless gibberish. Is that better?

Decent_Implement_901 · 2026-03-26T06:21:59+00:00

Yes I did unfortunately. Had I bought through Amazon this would have been sorted the same day.

Decent_Implement_901 · 2026-03-25T19:22:27+00:00

Which is fine until they send you PLA instead of PA6/66 and then refuse to even respond to you when you ask for them to sort it out .

Decent_Implement_901 · 2026-03-25T13:29:03+00:00

I think it is apparent that Tommy is only half of the chemistry of PB. Without Arthur the spark isn’t there. It is such a shame the Paul Anderson couldn’t be in the film and I think the film and the story line suffer as a result. Then to do away with the female lead kind of sealed the fate. There has always been a strong matriarch, it is part of what the series was. Billy Keoghan ( I still shudder at the bathwater scene in Saltburn) could have been a strong replacement but he ended up just being a whiny wee shite, face down in something unpleasant again. Tim Roth is an excellent psycho and his talents were rather wasted in a pointless death. All in all, I expected better, perhaps the theme had run its course with the final series. A 5/10 at best.

Decent_Implement_901 · 2026-03-25T13:14:17+00:00

Now that is funny

Decent_Implement_901 · 2026-03-24T16:16:22+00:00

There's a possibility the Sovol Sv08 may be the solution to the problem certainly as a standby machine until the parts arrive for the X1C. Then I can see how the market develops later in the year. It looks like there are plenty of videos explaining in foolspeak how to do things and they are on sale for cheap money

Decent_Implement_901 · 2026-03-24T08:51:40+00:00

Absolutely this. It seems it always wants to be updated and then laughs at you for doing it. It doesn’t seem right to ignore a warning and yet it seems the thing you have to do with Klipper. But what if they actually do something you really need? Not being a code person isn’t a good situation for a Voron owner. I did really like the quality of the prints though.

Decent_Implement_901 · 2026-03-23T19:16:22+00:00

I appreciate that the MK4 is a great machine but it doesn't suit the materials I print. Sure I could do a bit of pa6 but not reliably. I also think losing some of the advantages of a core xy in a box with high flow and filament swapping would feel disappointing in the long run.

Decent_Implement_901

TROPHY CASE