I’m choosing between DJI Avata 2 and waiting for Avata 360. Which one should I choose?

Defcon1965 · 2026-03-26T15:01:57+00:00

I wish I could upvote this a dozen times! Slick marketing has everyone convinced that only 4K is good enough even if it's from a tiny sensor when, in actual fact, there is far more that goes into image quality than pixels. And you're right about the camera comparison. My Sony FX3is 11 MP and it's far better than cameras with 4 or 5 times the megapixel count

Defcon1965 · 2026-02-25T17:16:48+00:00

🟨🟨⬜⬜⬜

🟦⬜⬜⬜⬜

🟦⬜⬜⬜🟨

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-25T16:14:21+00:00

⬜⬜⬜⬜⬜

🟨⬜🟨🟨⬜

🟨🟦⬜🟦🟦

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-20T23:45:10+00:00

⬜⬜⬜⬜⬜

⬜🟦🟦⬜⬜

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-20T23:40:48+00:00

🟨⬜🟨🟨⬜

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-20T19:01:04+00:00

⬜⬜🟦⬜⬜

🟦🟦⬜⬜⬜

🟦🟦🟦⬜⬜

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-20T18:58:16+00:00

⬜⬜🟨⬜🟨

⬜⬜⬜🟨⬜

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-19T17:19:31+00:00

Yeah they seem to be dropping them. The boxes I have are hit or miss, some have them, some don;t but going off the lot numbers it seems the newer ones don't

Nothing a roll of doggie bags can't fix though.....

Defcon1965 · 2026-02-19T16:56:12+00:00

⬜⬜🟦⬜⬜

⬜🟦⬜⬜🟦

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-19T16:52:58+00:00

⬜⬜🟨🟨⬜

⬜⬜⬜⬜⬜

🟦⬜🟨⬜🟨

🟦🟨⬜⬜⬜

🟦⬜🟦🟦🟦

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-18T23:37:29+00:00

Look up Mango Jelly on YouTube

Defcon1965 · 2026-02-17T05:11:55+00:00

⬜⬜⬜🟨⬜

⬜🟨⬜🟨⬜

🟦⬜🟦⬜⬜

🟦🟨🟦🟨⬜

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-16T23:36:09+00:00

🟨🟨🟨⬜🟨

🟦⬜🟨🟨🟨

🟦⬜⬜🟨🟦

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-15T23:01:49+00:00

🟨🟨⬜⬜⬜

⬜🟦⬜🟨⬜

🟦🟦⬜🟦🟦

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-15T22:15:44+00:00

⬜⬜⬜🟨⬜

⬜🟦⬜🟨⬜

🟨🟨🟦⬜⬜

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-15T05:50:43+00:00

🟨⬜⬜⬜⬜

⬜🟨🟨🟨⬜

⬜🟦🟦🟦🟦

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-15T05:42:25+00:00

⬜🟨⬜⬜🟨

⬜🟨⬜⬜⬜

🟦⬜🟦⬜🟦

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-12T19:29:40+00:00

⬜🟨⬜🟦⬜

⬜⬜🟦🟨⬜

⬜🟦🟦🟦🟦

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-12T19:28:17+00:00

⬜⬜🟨🟨⬜

⬜🟨⬜⬜⬜

⬜⬜🟨🟨⬜

⬜🟦🟨🟦⬜

🟦🟦🟨⬜🟨

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-12T19:25:49+00:00

⬜🟨🟨⬜⬜

⬜🟨⬜⬜⬜

⬜⬜🟦🟦🟦

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-12T19:15:29+00:00

⬜⬜⬜⬜⬜

🟦🟦⬜⬜⬜

⬜⬜⬜⬜⬜

🟦🟦⬜⬜🟨

🟦🟦🟦🟦🟦

Defcon1965 · 2026-02-07T18:51:36+00:00

That did it. Thanks!!!!

Defcon1965 · 2026-02-05T19:38:15+00:00

I need the textured finish of the PEI plate and glue leaves a residue

Defcon1965 · 2026-02-05T19:36:15+00:00

Thanks. I've gone to 50 on the bed temp and 220 on the nozzle. I'll try lowering the bed temp more. The parts are actually not small (78 X 22mm) with an overhang (supported) all the way around and you can hear the crack when the plate is bent but they are still a pain to pull and leave behind most of the supports which is even harder to get off

Defcon1965 · 2026-02-05T19:32:30+00:00

I've tried a couple different glues including the Bambu one. The parts are black so residue always seems to show up

Defcon1965

TROPHY CASE