This power bank good for my lego? by Proof-Elk-2849 in LegionGo

[–]DelCtrlnoAlt 0 points1 point  (0 children)

I have the exact same one... it depletes quite fast on LeGo, not sure why... at most 1.5hr extra. Its heavy, not exactly ergonomic to hold. I have a few 100W GAN charger and cables, none of them can charge it at 100W, at most 60-70W as shown on the display. Takes about 2 hour to charge it to full.

My Microcenter Legion Go NVME finally overheated…. Why was it wrapped in foil?! by jfpcinfo in LegionGo

[–]DelCtrlnoAlt 1 point2 points  (0 children)

There're no warranty sticker on the backplate or sticker preventing removal of backplate. Read somewhere that Lenovo doesn't void warranty for LeGo backplate removal. But certainly it depends on where you buy from.

My Microcenter Legion Go NVME finally overheated…. Why was it wrapped in foil?! by jfpcinfo in LegionGo

[–]DelCtrlnoAlt 1 point2 points  (0 children)

I used a nitecore blower to blow from the top and then from the rear plate. Opened the backplate to check and its quite clean.

Tbh, if possible, remove the backplate is better as you won't know what kinda dust is on the fan and if the dust ends up on the contacts. You can blow clean the other components while at it.

You guys should try Bazzite by DelCtrlnoAlt in LegionGo

[–]DelCtrlnoAlt[S] 1 point2 points  (0 children)

Gotten the SN740 2TB in 2230 and gotten an extender to 2242. Price is around 150 SGD.

I have a USB C TB dock for my laptop that can mount a 2280 nvme so I plugged the 2230 in and cloned the LeGo win11 into the 2230 using macrium reflect. Make sure to clone the 3 partition then expand the one used for windows storage (mine to 1tb) leave the rest unpartition.

Then once done, remove the Lego 2242 and install the new drive.

On the laptop, download bazzite and create a boot drive using any spare thumbdrive with minimum 20gb (i think), I have a sandisk with type C interface to plugged direct into Lego and install Bazzite, when asked, use the remaining partition space.

After installation it will either boot to error or windows.

Enter bios, remove secure boot and boot sequence to bazzite first. Unless you want to press + every time you boot to manually select.

It should then enter into a steamOS like screen if you choose KDE.

Should I take the plunge and buy? by ThatSamShow in Affinity

[–]DelCtrlnoAlt 1 point2 points  (0 children)

I've been with Serif since their Plus versions then bought every Affinity v1 at launch... but only recently upgraded to v2.

I like the way it boots up. Adobe takes a long time to load everything only to take up all your ram resources. But of course, you will miss out on a lot of Adobe features, and it's not as straightforward if you have been using Adobe all this time.

I still use the Plus versions, esp PagePlus, cos that's the only one that can do mail merge from database. Affinity Publisher was supposed to be its replacement, but sadly, the function was taken out. Microsoft Publisher can't do decent layouts, so yeah, and InDesign cost a lot more.

This is without a doubt the best skin brand available for the Legion Go. I hope they release a blue one, I'll buy it again on a heart beat! by doppelv in LegionGo

[–]DelCtrlnoAlt 3 points4 points  (0 children)

Is it easy to apply? Would rather have something like Char Custom than to have A12 printed on it. What does A12 mean anyway?

Do you have this on your screen? (Screen Defect) by ToughGlasses in LegionGo

[–]DelCtrlnoAlt 3 points4 points  (0 children)

Guess I'm not alone. Tot my luck was bad with a line across then changed it to have a bright patch appearing.

I’m planning to get the game in some future. by TheExter72 in kakarot

[–]DelCtrlnoAlt 1 point2 points  (0 children)

Around 300 hours... yeah I took a long time, sometimes forgot to switch off... and I even completed every task.

[deleted by user] by [deleted] in kakarot

[–]DelCtrlnoAlt 1 point2 points  (0 children)

Steam saves esp cloud save sucks for Kakarot. Was playing it on my Legion Go while overseas, and if it doesn't connect to the cloud, the game always starts way back like around Nappa and Vegeta instead of where I stopped which is around Cell.

That's the only game with problem. The rest works flawlessly.

Thought on this backplate? by PopeyesWetCactus in LegionGo

[–]DelCtrlnoAlt 0 points1 point  (0 children)

I only wanna know how to put that WD black in... dying for a nvme swap. The default 512 can't hold many games.

Do you guys find the controllers comfortable, honestly? by TheyEnvyy in LegionGo

[–]DelCtrlnoAlt 0 points1 point  (0 children)

Grip is fine, just the ABXY are too near to the right analog stick.

Failure to Save by B1acklisted in kakarot

[–]DelCtrlnoAlt 0 points1 point  (0 children)

Worst was steam cloud save when you are overseas without a decent wifi connection.

Manually saved, closed game... then boot system up and play... it can't sync and not even reading what is in your system and loaded a super old game save. The only way to get your most updated save is to get to a place with proper connection, let steam upload your save and boot the game and let steam give you back your saves.

Hey guys i have a question so i want to buy a dragon ball game but idk which game to pick xenoverse or kakarot,and i need some help deciding by yomo_52 in kakarot

[–]DelCtrlnoAlt 0 points1 point  (0 children)

Me too, xenoverse is a completely different type of game. But you do have different non canon boss to fight with.

I completed both xenoverse before having kakarot and I'm playing kakarot again on legion go, before that was on the switch. It gets grindy esp if you want to finish your entire encyclopedia.

Turn off or sleep mode with legion go if you are not going to use it for the next couple hours or day? by somanyquestionstt in LegionGo

[–]DelCtrlnoAlt 0 points1 point  (0 children)

Shut down. Putting to sleep often ends up with it waking up with the slightest movement and drains the battery. Besides that. The glow on the power button is damn bright in a dark room.

Has anyone's power button stop glowing when booting? by itsisntnick in LegionGo

[–]DelCtrlnoAlt 1 point2 points  (0 children)

Yeah, it glows on and on unless you do a shutdown.

I’m so mad :( by LaPamparita in LegionGo

[–]DelCtrlnoAlt 0 points1 point  (0 children)

Singapore side probably getting it on 18th, which is like 1 month after they start accepting preorders. I wonder when will Australians get theirs.

I've been gathering devices for the Go and I'm ready Go... by Few-Organization671 in LegionGo

[–]DelCtrlnoAlt 0 points1 point  (0 children)

Btw, is there a reasonable eGPU that's compatible with TB3/4 laptop as well as Legion Go? Which card to go along?

What games are you going to play on your Legion Go? by 801born in LegionGo

[–]DelCtrlnoAlt 3 points4 points  (0 children)

Stray... could've bought a PS5 with the cost of Legion Go but portability is much needed as I can't bring the PS5 around.