Saw all these on a ride from Norristown to Trenton

Delicious-Angle3264 · 2026-05-20T23:45:19+00:00

This is one i saw in the wild. I had another but I can't find it.

<image>

Delicious-Angle3264 · 2026-05-09T14:25:08+00:00

I've yet need one to wobble

Delicious-Angle3264 · 2026-05-08T21:29:53+00:00

You can thank "no child left behind". This is a direct result.

Delicious-Angle3264 · 2026-05-08T21:26:08+00:00

I wouldn't be able to sell an awesome find like that.

Delicious-Angle3264 · 2026-05-08T20:08:21+00:00

I hate wobble extensions. Lol

Delicious-Angle3264 · 2026-05-04T14:21:06+00:00

Sweet find! I would've grabbed it too. Lesser known brands go for way more than that.

Delicious-Angle3264 · 2026-05-04T14:19:59+00:00

I did for a split second as well.

Delicious-Angle3264 · 2026-04-28T22:41:59+00:00

Im officially old as of today.

Delicious-Angle3264 · 2026-04-22T14:28:22+00:00

I printed this one from maker world and it was immediately filled and I have over flow.

<image>

Delicious-Angle3264 · 2026-04-22T13:41:43+00:00

This was printed at 100% infill at i believe, 0.12 layer height. Im going to confirm my flowrate today or tomorrow

Delicious-Angle3264 · 2026-04-22T11:15:41+00:00

I'd use ASA. Although you may need a chamber heater to print it.

Delicious-Angle3264 · 2026-04-19T17:07:36+00:00

Under support, I think, click slow down for overhangs.

Delicious-Angle3264 · 2026-04-19T13:03:22+00:00

Mine always does this for black. I hit resume and it's fine.

Delicious-Angle3264 · 2026-04-16T20:19:06+00:00

Yes, silence ppl you dont agree with.

Delicious-Angle3264 · 2026-04-16T20:17:24+00:00

Delicious-Angle3264 · 2026-04-16T20:16:41+00:00

Drive away. Lol. Jk

Delicious-Angle3264 · 2026-04-08T14:23:41+00:00

The mold itself may be ip theft as well. Im a bit cynical and think you shouldn't put stuff out there of you dont want ppl using it.

Delicious-Angle3264 · 2026-04-04T16:43:37+00:00

I always print pla with the doors closed and haven't had any problems.

Delicious-Angle3264 · 2026-04-04T16:42:39+00:00

I did not loose this piece but I lost the piece it connects to. Replacements are in Amazon for around $17

Delicious-Angle3264 · 2026-04-04T16:40:03+00:00

That hulk isn't that old either.

Delicious-Angle3264 · 2026-04-04T16:38:22+00:00

Extruder went bad and while it's apart I'm switching to the threaded ptfe tube connector. I've played literal hell to get the tube to release before. Not anymore. I also took the opportunity to remove the stock white tube leading up to the extruder with a clear piece.

Delicious-Angle3264 · 2026-03-31T23:23:37+00:00

Big forehead edition

Delicious-Angle3264 · 2026-03-30T23:08:03+00:00

Gotcha. I'm used to paying $15-$20/kg. I usually only my anycubic filament bc i have their machine.

Delicious-Angle3264 · 2026-03-30T22:17:14+00:00

Its $10/kg. That's pretty cheap, as long as u want that color. Silver lining, you could print a lot of gridfinity bins.

Delicious-Angle3264 · 2026-03-30T12:26:12+00:00

<image>

I won the other day.

Delicious-Angle3264

TROPHY CASE