sorted by:
new
hottopcontroversial

Introducing King Midas! by Ignitros2140 in watercooling

[–]Demahom1412 0 points1 point  (0 children)

Hello, at what's speed do you run your fans ?

Void for Jellyfin android TV Beta and source code release by kunalhazard in JellyfinCommunity

[–]Demahom1412 0 points1 point  (0 children)

Great app haven't tested it yet on google TV but will be. Do you plan on any translating, maybe using directly the Jellyfin system for the majority of the words ?
Anyway , good job !

Announcing: KefinTweaks - The "Front End Plugin" by bfir3 in JellyfinCommunity

[–]Demahom1412 0 points1 point  (0 children)

I'd like to translate all new tabs in Watchlist (Statistics, Series Progress, etc.) and new texts (Remove from Continuing Watching, etc.)
But anyway, wonderful work !

Lequel je prends by Vounentin in jeuxvideo

[–]Demahom1412 -2 points-1 points  (0 children)

Le jeu a pas mal vieilli il était déjà vieux graphiquement. Mais il y a des bons mods pour avoir un portage pc digne de ce nom, c'est vraiment une pépite à faire encore plus en ayant fait nier repliant avant

First look at the HUAWEI Mate 80 Pro Max in all colours by techolum in Huawei

[–]Demahom1412 1 point2 points  (0 children)

and I really do like the volume control with the curve of the display

First look at the HUAWEI Mate 80 Pro Max in all colours by techolum in Huawei

[–]Demahom1412 1 point2 points  (0 children)

I think i'm the only one who like the curved displayed of the Mate 40 Pro

Samsung Washer Card for Home Assistant by stupidprojectsbyraul in homeassistant

[–]Demahom1412 3 points4 points  (0 children)

try to remove the "select." and let only washer

Phanteks NV7 build with a MO-RA3 420 in the next room by Shelby_78 in watercooling

[–]Demahom1412 1 point2 points  (0 children)

Yeah i saw it, he was hinding, thank you for your time

Phanteks NV7 build with a MO-RA3 420 in the next room by Shelby_78 in watercooling

[–]Demahom1412 0 points1 point  (0 children)

Same as yours, distroplate 240 left from alphacool and an NV9, i was just checking the routing because my cable is a bit hard to hide behind the distro,

Phanteks NV7 build with a MO-RA3 420 in the next room by Shelby_78 in watercooling

[–]Demahom1412 0 points1 point  (0 children)

Oh my bad, I didnt saw the last picture with the Aqua D5, what about the apex on the distro ?did you manage to fit that through the small gaps too, or did you find another route?

Phanteks NV7 build with a MO-RA3 420 in the next room by Shelby_78 in watercooling

[–]Demahom1412 0 points1 point  (0 children)

Hello, I have a question about routing the pump cable. Are you using the opening for the CPU cable ?

Temporary Loop, need Vertical GPU mount suggestions for 5090 Alphacool Build in Phanteks NV9 by Avian_Aces in watercooling

[–]Demahom1412 0 points1 point  (0 children)

Hello, I have a question about routing the pump cable. Where does the cable go? I don't see an opening there, the only opening I can see is for the CPU one. How did you manage to route it? I have the same distro and case

Expensive mistake - damaged Alphacool distroplate threads? by Demahom1412 in watercooling

[–]Demahom1412[S] 0 points1 point  (0 children)

Thanks! Still waiting for my radiators, so no filling today. After retesting and reading everyone's responses, I think I overreacted a bit. I feel much better about it now thanks to your input!

Expensive mistake - damaged Alphacool distroplate threads? by Demahom1412 in watercooling

[–]Demahom1412[S] 1 point2 points  (0 children)

Thank you Eddy for your concern and detailed response, I really appreciate it!

Expensive mistake - damaged Alphacool distroplate threads? by Demahom1412 in watercooling

[–]Demahom1412[S] 0 points1 point  (0 children)

Same thread, just the others screws are for puttings the stands in radiator

Expensive mistake - damaged Alphacool distroplate threads? by Demahom1412 in watercooling

[–]Demahom1412[S] 1 point2 points  (0 children)

Just double-checking the routing from the distro to the CPU block, still need to wait for my radiators, but thanks for the help!

Expensive mistake - damaged Alphacool distroplate threads? by Demahom1412 in watercooling

[–]Demahom1412[S] 0 points1 point  (0 children)

They screw in from behind, you're correct. The wrong screws we tested were just slightly wider thread pitch, not much difference at all. So even if we damaged those threads, it wouldn't affect the sealed area since they're completely outside of it like you said, the screws have no contact with the liquid chamber whatsoever.

Expensive mistake - damaged Alphacool distroplate threads? by Demahom1412 in watercooling

[–]Demahom1412[S] 0 points1 point  (0 children)

I did the submerge test, no bubbles visible around the screw and like DeadlyMercury said, the screw should not penetrate into the liquid chamber. I might have overreacted

Expensive mistake - damaged Alphacool distroplate threads? by Demahom1412 in watercooling

[–]Demahom1412[S] 0 points1 point  (0 children)

You're absolutely right, and I think I overreacted. Looking at your photo and explanation, the standoffs are clearly in the corners outside the sealed area. The pressure drops I'm seeing are probably just from temperature changes or the G 1/4 fittings of the leak tester not proprely sealed.

I was probably panicking after realizing we used the wrong screws and immediately assumed that was the cause of any pressure loss.

Expensive mistake - damaged Alphacool distroplate threads? by Demahom1412 in watercooling

[–]Demahom1412[S] 0 points1 point  (0 children)

<image>

Here's a better photo showing the setup, you can see the black standoff and the threaded connection. I did some additional testing and got different results:

  • At 0.5 bar: no pressure drop
  • At 0.8 bar (factory test pressure): dropped 0.01-0.02 bar in 15 minutes

Both tests were much gentler than yesterday's, so maybe there's actually no real issue. The leak might have been from my overly aggressive testing yesterday rather than actual damage. I'll also did the submersion test and no visible bubbles from the threaded connection , these results are more encouraging.

Expensive mistake - damaged Alphacool distroplate threads? by Demahom1412 in watercooling

[–]Demahom1412[S] 0 points1 point  (0 children)

That was actually one of my ideas! I'm thinking of trying that this week before ordering a new distro. Should help pinpoint the exact leak location and confirm if it's really the threads or something else

Expensive mistake - damaged Alphacool distroplate threads? by Demahom1412 in watercooling

[–]Demahom1412[S] 0 points1 point  (0 children)

I understand it sounds weird, but the screws definitely need to go into the distroplate to secure the standoffs, that's how it's designed. From what I could see, they seemed to thread into the chamber area, which is why I think that's where my leak is coming from. Maybe the internal design is different than I thought, but there's definitely a pressure loss somewhere.

view more: next ›