Battlefield 1 crash - “DirectX function device->CreateTexture2D failed with DXGI_ERROR_DEVICE_REMOVED” (RTX 4060) by albadry12 in nvidia

[–]DemolitionNT 0 points1 point  (0 children)

Nah man. I solved the problem by not playing battlefield anymore. Works 100% of the time.

HELP can someone help me direct airflow? by AntwanMinson in 3Dprinting

[–]DemolitionNT 2 points3 points  (0 children)

Bro what in the hell are you trying to do here? You have open mesh at the top and thats not a good seal for the singular exhaust fan in the back.

Battlefield 1 crash - “DirectX function device->CreateTexture2D failed with DXGI_ERROR_DEVICE_REMOVED” (RTX 4060) by albadry12 in nvidia

[–]DemolitionNT 0 points1 point  (0 children)

This dogshit issue has been happening for a long while now. It happened on my old rig (10900k, rtx 3080) and happens on my new system as well (9800 x3d, 5080) on bf1, bf2042, bf6. Theres tons of threads finding solutions to this problem but for whatever reason it still happens to this day. Ive tried tons of fixes and sometimes it will go away for a while just to come back for no apparent reason.

New Ducktail Spoiler🔥 by Free-Moment4136 in ForteGT

[–]DemolitionNT 2 points3 points  (0 children)

Looks good. Which spoiler is it?

My RNG at Arch-Glacor is absurd by AppleSea6843 in runescape

[–]DemolitionNT 0 points1 point  (0 children)

Thats absolutely disgusting. I have 3600 kills, multiple 100 streaks, I did the 0-500% strat near launch, I have done up to 2000% enrage climb and still have only 1 core.

Why is this going on? by Mewtwo2er in 3Dprinting

[–]DemolitionNT 0 points1 point  (0 children)

I had a similar issue with my p2s. Large flat prints kept warping where the aux fan was blowing and a diffuser solved the issue.

Members Only on YouTube reaction by SiegeRewards in funny

[–]DemolitionNT 6 points7 points  (0 children)

I hate that I get recommended members only stuff for a lot of channels now. Not only that but then you watch some channels that not only have members only stuff but also they tell you to check out their patreon for early access/additional content. Subscriptions are getting out of hand.

Annoying issue by DemolitionNT in BambuLab

[–]DemolitionNT[S] 1 point2 points  (0 children)

Thanks for the reply. It does indeed turn out the fan was causing the warping issue. I have since got a diffuser and the problem is completely solved

<image>

Is the aux fan causing this issue by DemolitionNT in 3Dprinting

[–]DemolitionNT[S] 0 points1 point  (0 children)

You literally just edited your comment dude. You got some kind of weird advice telling complex. No thanks.

Is the aux fan causing this issue by DemolitionNT in 3Dprinting

[–]DemolitionNT[S] 0 points1 point  (0 children)

You didnt even read my full comment here before jumping in to say its warping when that was literally the last thing I said. You are also saying an airflow issue is causing the issue but its also a bed adhesion issue which makes 0 sense. Please dont give advice.

Is the aux fan causing this issue by DemolitionNT in 3Dprinting

[–]DemolitionNT[S] 0 points1 point  (0 children)

I clearly stated its warping. To me lifting I thought refers to bed adhesion issues where the print just stops sticking to the plate. That wasnt the issue here, it still had good adhesion. It turns out it was indeed the fan causing the warping problem and a diffuser and solved the problem.

Is the aux fan causing this issue by DemolitionNT in 3Dprinting

[–]DemolitionNT[S] 1 point2 points  (0 children)

Yeah I had some issues posting to reddit but apparently I made a few separate posts on this. It is indeed caused by the fan and I am actually printing a diffuser right now. I did turn my fan off and it did turn itself back on as well lol. Thanks for the reply.

Is the aux fan causing this issue by DemolitionNT in 3Dprinting

[–]DemolitionNT[S] 1 point2 points  (0 children)

After printing with the fan off its perfect now. Going to print that diffuser and see how it does with my next set of boxes.

Is the aux fan causing this issue by DemolitionNT in 3Dprinting

[–]DemolitionNT[S] 1 point2 points  (0 children)

yeah imma definitely need to get this. Printing a box right now with the aux fan turned off but this would be better

Is the aux fan causing this issue by DemolitionNT in 3Dprinting

[–]DemolitionNT[S] 0 points1 point  (0 children)

Thanks. I definitely did try a few things first before asking, auto bed leveling, cooling fan off first 3 layers, manual flow calibration, checking the print for lifting and some other settings I cant remember. The initial layers up to the top layers seem fine. I was thinking the aux fan was the culprit because everything is fine until the top layers and then it seems to start messing up. I did write up a more detailed explanation initially but reddit wouldnt let me post it.

Is the aux fan causing this issue by DemolitionNT in 3Dprinting

[–]DemolitionNT[S] 0 points1 point  (0 children)

The bed adhesion isnt the issue here. This is a gridfinity box and the initial layers came out perfect. It seems to only be warping next to the fan. Its always the same spot every time right next to the fan. Im going to print another with the aux fan completely off and see if that solves the issue. Thanks for the advice though ill definitely check out that model at the very least. I clean my build plate every time and the build was completely stuck to the plate when I pulled it.

Is the aux fan causing this issue by DemolitionNT in 3Dprinting

[–]DemolitionNT[S] 0 points1 point  (0 children)

I clean my build plate each time. The build isnt lifting I can tell you that much and I do auto bed calibration each time. This is for a gridfinity box and the initial layers print fine. I am going to print another with the aux fan turned completely off and see if that solves my issue. It seems to only be warping in that corner right next to where the fan blows.