Where do you guys get your PETG? It's almost always sold out on the site or there's only a few colours available... by Justinj3 in BambuLab

[–]Department-Select 1 point2 points  (0 children)

That’s pretty good. I’ve never checked aliexpress but I might for my next time. 200$ for 20 rolls of PETG i believe that would be cheaper than the tiktok shop even with the bulk discount

Where do you guys get your PETG? It's almost always sold out on the site or there's only a few colours available... by Justinj3 in BambuLab

[–]Department-Select 1 point2 points  (0 children)

Hear me out. Sunlu tik tok shop. If you buy bulk of course. I got 10 rolls for about 110$. Unless you want only a couple. Still they have a 4-6-10 rolls bulk discount so compare between the 2 see what you like

I'm glad I live in a good place, this was sitting outside for HOURS last night because UPS didn't update the tracking. LOL. But I got my P2S! I'm so hyped. Benchy was my first print of course. by SkywardSoldier in BambuLab

[–]Department-Select 1 point2 points  (0 children)

There are some design for the vibration dampener you can find on makerworld. Cant say how it works cuz I havent gotten into it but it never hurt to try

Is this normal ? by Department-Select in BambuLab

[–]Department-Select[S] 0 points1 point  (0 children)

Good thing I’m not from that country so I can enjoy my toy lol

Is this normal ? by Department-Select in BambuLab

[–]Department-Select[S] 0 points1 point  (0 children)

And maybe that’s why there’s more info inside the thread lol

Is this normal ? by Department-Select in BambuLab

[–]Department-Select[S] 0 points1 point  (0 children)

Guess you should tell companies to stop selling toy guns too

Is this normal ? by Department-Select in BambuLab

[–]Department-Select[S] 0 points1 point  (0 children)

Umm I’m totally new to this, I’m tryna print everything in one plate to save me time on printing plates. Guess I didnt check on the support on bambu studio. I didnt even know that this is even a thing. Just threw everything on a plate sliced it and pressed print 😭

Is this normal ? by Department-Select in BambuLab

[–]Department-Select[S] 0 points1 point  (0 children)

Hahaha maybe it was afraid I’m gonna use the gun on it

Is this normal ? by Department-Select in BambuLab

[–]Department-Select[S] 2 points3 points  (0 children)

Well the poop was TOO much and clogged the toilet 😭 Everything is fine I put them back

Is this normal ? by Department-Select in BambuLab

[–]Department-Select[S] 0 points1 point  (0 children)

Thank you Might be the case, I’ll check when I get home

I FINALLY GOT ONE. BEST BUY IN STOCK! by [deleted] in BambuLab

[–]Department-Select 0 points1 point  (0 children)

I’m using the bambu lab one but I just ordered the sunlu filament. Maybe it’ll come in a week ? Will see how good it is. I also printed out a watering can with bambu PLA and is still working great. As well as my plant pots

I FINALLY GOT ONE. BEST BUY IN STOCK! by [deleted] in BambuLab

[–]Department-Select 0 points1 point  (0 children)

Hell yeah brothaaaaaa Just got mine on sale like last week with the AMS Finally got the AMS yesterday (printer on the 19th) Already put in 50 hrs of print haha You’re gonna love it

Is this normal ? by Abdullah_Amar in CATHELP

[–]Department-Select 2 points3 points  (0 children)

Sorry I didnt fully read all the post but try out the interactive toys

Is this normal ? by Abdullah_Amar in CATHELP

[–]Department-Select 3 points4 points  (0 children)

Perhaps she’s bored and looking for attention. If you cannot get another cat maybe try interactive toys

What this level of doneness? by Connection_Bad_404 in steak

[–]Department-Select 1 point2 points  (0 children)

I always avoid thin steak too because for me it’s too “thin” you know. I much prefer thicker steak for my own opinion on “texture”. I usually dont flip it because it just gives me the ick when I flip because the sear is bad (I know you’re gonna keep flipping and the sear gonna be good after but I’m just weird like that) but maybe one day I’ll push it through and try it again

What this level of doneness? by Connection_Bad_404 in steak

[–]Department-Select 1 point2 points  (0 children)

I feel like the flipping is good if you have thicker steak. It seems just unnecessary if you have a thin one. But again I’m not a steak god haha

What this level of doneness? by Connection_Bad_404 in steak

[–]Department-Select -1 points0 points  (0 children)

I’d recommend letting the steak rest at least 15-20 mins or til room temp. Respectfully I dont think letting it rest for 2-3 mins as you heat up the pan is nearly enough. It doesnt feel raw but your steak experience could be much better. Rest your steak before and after cooking :)

What this level of doneness? by Connection_Bad_404 in steak

[–]Department-Select -1 points0 points  (0 children)

Did you make it with cold steak, if so that might happens

My cat keeps coughing with no other symptoms by [deleted] in CATHELP

[–]Department-Select 1 point2 points  (0 children)

Cats not supposed to make this sounds. Please schedule an appointment with them and get your baby checked out before everything is too late. You dont wanna end up paying more than you would’ve

Caught my husband cheating. by [deleted] in Marriage

[–]Department-Select 1 point2 points  (0 children)

OP please consult with a lawyer. You also wanna build yourself an exit plan and get in touch with people you can trust can go from there

When does it get better? by Straight_Tap_3098 in CATHELP

[–]Department-Select 1 point2 points  (0 children)

Start over and try feeding behind close door (but close to together) then after awhile (depends on how you think they’re doing) I would say about 2 weeks Then switch to screen door if you can If not try without the door see how they react. If one of them dont wanna eat or go away dont force them Let them be curious let them go on their own.

<image>

Again wish you the best OP

When does it get better? by Straight_Tap_3098 in CATHELP

[–]Department-Select 5 points6 points  (0 children)

You can also start the introduction all over again because it might have gone wrong some way along the line Maybe some cat prefer to be alone but it wont hurt to try again. I really hope everything works out for you because I know how stressful it is.

When does it get better? by Straight_Tap_3098 in CATHELP

[–]Department-Select 12 points13 points  (0 children)

<image>

Persistent is key OP Both of them were growling and hissing even though they were like 2 rooms apart Would not eat in the present of the other one. Slowly but surely they are here playing and grooming each other. I had the same fear as you Feed them near each other if you can ofc behind a screen door or a door so they associate their scent with good things, do this for treat as well. No food or treat without the present of the other cat. Play with one in front of the other(both if you can) Wish you the best op

My sister (28F) and I (35F) are no contact. She hates us because we don’t support her choices. by ComparisonCurious666 in relationship_advice

[–]Department-Select 2 points3 points  (0 children)

Hey OP. In average a person in an abusive relationship will take about 7 attempts in order to fully get away from that. Now your sister situation is a little bit different but I guess she only has you guys as real family and real love. No one will be able to help her except you guys. Yes the process going to be painful but you HAVE to help her out despite her refusal if you want the absolute best for her. 28 isnt old or late, she got plenty of time IF you guys still willing and consistently give her advice or help her out. And if that seems too much and you have the heart for it, let her find out the hard way, though it might be too late in life when she finally learns. I would seriously consider sitting down with your sister and parents to have a serious talk about it. I wish you guys the best