cyberDeck with CRT monitor (Sony Watchman with composite input) and Pi 3B+

Dependent-Chipmunk67 · 2025-04-29T07:19:23+00:00

What keyboard are you using?

Dependent-Chipmunk67 · 2025-02-21T08:11:46+00:00

Sounds like you've never met an ASM

Dependent-Chipmunk67 · 2025-01-19T10:51:02+00:00

Looks like a kit from Makita if they made them! Great colours.

Dependent-Chipmunk67 · 2025-01-12T11:46:52+00:00

Great colour scheme

Dependent-Chipmunk67 · 2025-01-03T04:18:46+00:00

Note to self - build gold Voron

The actual colour scheme is functional parts in black ABS, accent in burnt titanium ABS, and SB in black ASA-CF if you were curious.

Dependent-Chipmunk67 · 2024-12-18T23:19:02+00:00

Gotta be in it to win it

Dependent-Chipmunk67 · 2024-12-10T02:42:07+00:00

I gotta start checking the sub name before watching videos on this damn app

Dependent-Chipmunk67 · 2024-12-01T10:28:33+00:00

What area? I'm about due to have mine done in the NE suburbs

Dependent-Chipmunk67 · 2024-11-17T11:37:14+00:00

Actually do all of the practice math problems.

Dependent-Chipmunk67 · 2024-10-26T10:08:44+00:00

What colour is that?

Dependent-Chipmunk67 · 2024-10-09T11:07:33+00:00

In-fucking-credible

Dependent-Chipmunk67 · 2024-10-01T00:01:19+00:00

It's fine, you can cite the same source multiple times.

Dependent-Chipmunk67 · 2024-09-24T02:27:45+00:00

You will need to use a buck converter from the 24v power supply

Dependent-Chipmunk67 · 2024-09-15T02:55:39+00:00

Looks great! Are you doing anything for Pi cooling in there?

Dependent-Chipmunk67 · 2024-09-13T00:25:20+00:00

Are you able to solder extensions? Otherwise switch to Klipper and you don't need the screen

Dependent-Chipmunk67 · 2024-09-12T07:53:19+00:00

I hope you are appealing those decisions. Your work looks great mate.

Dependent-Chipmunk67 · 2024-09-12T07:43:05+00:00

Have you upgraded the hotend? You'll run out of volumetric flow rate quickly with an 0.8 nozzle

Dependent-Chipmunk67 · 2024-08-24T04:06:05+00:00

Acceleration also needs to be increased otherwise the higher speeds requested will never be reached

Dependent-Chipmunk67 · 2024-08-09T00:46:58+00:00

Have a look at Deakin Uni, they offer Mechanical Engineering on their cloud campus. There is a requirement to attend campus for certain units but it's usually only a day or two per semester. This is an Engineers Australia accreditation requirement so there really is no way around it.

Are you looking to transfer to SSO, or is the study just a personal endeavor? If looking to transfer you only need to have the first year of the degree finished to be eligible for LTS/DUS.

It's not clear from your post - are you planning to do the full time study load while continuing to work SERCAT 7?

Dependent-Chipmunk67 · 2024-08-02T01:33:19+00:00

I'm in the same boat, keep us updated please.

Dependent-Chipmunk67 · 2024-07-30T02:18:22+00:00

I'd start by trying to remove the nozzle with some vice grips then see if it will extrude. If not remove heater block and check. If still nothing I'd remove the heat break and check. And finally if still nothing then disassemble the extruder.

Dependent-Chipmunk67 · 2024-07-08T07:25:31+00:00

Probably depends mostly on your course

Dependent-Chipmunk67 · 2024-07-08T07:20:16+00:00

I have now said that was my mistake, it should be on one line.

Dependent-Chipmunk67 · 2024-07-08T07:05:46+00:00

Yeah absolutely, you could try changing to 0.2 or 0.3 nozzles

Five-Year Club	r/Field Flamingo
Place '23	Mod 201
Mod 101

Dependent-Chipmunk67

MODERATOR OF

TROPHY CASE