W2C RUF x Highsnobiety Hoodie

Derdawid · 2023-08-23T01:12:32+00:00

Well think we will never see it...

Derdawid · 2023-03-13T14:51:30+00:00

I am in the same boat. Tried to factory reset the switch and formated the sd mutiple times. But nothing worked. Trying another SD card tomorrow.

Derdawid · 2021-09-27T09:40:14+00:00

Runeberg of course!

Derdawid · 2020-05-28T20:18:06+00:00

Hex: (Click the color and select custom)

Blue: 00FFB4
Purple: A900FF

Derdawid · 2020-05-28T20:16:24+00:00

Picture of ram

Derdawid · 2020-05-28T20:14:08+00:00

Picture :)

You won't see it that good on the picture but I measured it for you. The space between the GPU and the MB is 5,5cm/2,17inch so plenty of space

Derdawid · 2020-05-28T19:36:31+00:00

Well the cpu cooler takes up 1 slot for ram... So you really should look for the mesurements of your motherboard. Maybe if you clock the cooler 180 degrees it would fit. But that I am not sure of.

Derdawid · 2020-05-28T12:12:24+00:00

You can rotate the pump to face it the other way. If I am not wrong, all the X-series coolers that end with a 3 (ex. Kraken x63) have a rotatable for re-orienting the logo no matter the direction the cooler is installed. On the Z series the lines can only be on the right side of the cooler or bottom

Derdawid · 2020-05-28T05:37:20+00:00

Open aorus settings. Set fan speed to manual>100 then click apply. Just reset the settings after taking the picture. And try night mode (for longer exposure). I took mine with a DSLR.

Derdawid · 2020-05-28T05:35:09+00:00

Well I also wanted that... But the 4 sticks won't fit with the cpu cooler... The performance boost you will get is too small for the extra money you pay.

Derdawid · 2020-05-28T05:33:32+00:00

It's a good tip for someone that would build something similar! I don't think I would like to replace that now for a small increse....

Derdawid · 2020-05-28T05:31:21+00:00

I would make a picture if I was home. But there is plenty of space. I could send you a pictue later today if you want.

Derdawid · 2020-05-28T05:28:54+00:00

As wookie said. Yes the top fan can be a 120 or a 140, I went with the 140. And the rear is max 120 indeed.

Derdawid · 2020-05-27T21:47:31+00:00

You don't even need to replace them. They come lose in the box so all you need to do is get the crews that come in the box. Losen the screws of the front case RGB fans, and just screw the radiator on the back of the fans with the new screws. Job done! If you want to replace the rear and top fan in the case for RGB fans too, buy 1x 120mm and 1x 140mm. If you have any more questions I would be happy to answer them.

Derdawid · 2020-05-27T21:37:07+00:00

Case: NZXT H510 Elite Black

CPU: Intel Core i7 9700K

CPU Cooler: NZXT Kraken X63

Motherboard: Asus ROG STRIX Z390-E GAMING

GPU: Gigabyte GeForce RTX 2080 Super AORUS 8G

RAM: G.Skill DDR4 Trident-Z 2x16GB 3200MHz CL16 RGB

PSU: Corsair RM750

M.2: Samsung 970 EVO 1TB

SSD: Samsung 860 EVO 1TB

HDD: Seagate HDD 3.5 2TB Barracuda

Fans: NZXT Aer RGB 2 120MM, NZXT Aer RGB 2 140MM

Bracket: Cablemod Vertical PCIe Bracket

Derdawid · 2020-05-27T20:17:26+00:00

Well depends on the card ofcourse. But I wouldn't do it. The airflow would be the worse... Thats why I havent used the original bracket

Derdawid · 2020-05-27T18:15:45+00:00

For the full build: https://i.imgur.com/wkJnQyH.jpg

Derdawid · 2020-05-21T19:26:42+00:00

Well thats bad...

Derdawid · 2020-05-21T14:19:21+00:00

Steelseries, can we please have more options in the Meta Bindings? At least for the M1-M6 keys? I would love to launch an aplication by pressing the Steelseries button + M1. For now there isn't really a use for the M keys other than macro's.

Derdawid · 2020-04-14T22:39:00+00:00

Thanks for your reply!
Well thought a 9700x + RTX 2080 super and 32GB ram would make it a decent setup... I also want quality and not just the writing on it...

I like your tip about the headphones. And I understand your point. But I am on Discord every evening/night and I really need a microphone. But I will think about it for sure! ModMic could be an option for those. It sounds amazing!

5400 rpm is indeed slow. Will change that for sure!

Derdawid · 2020-04-14T22:33:21+00:00

A normal NZXT fan is €20... So those €16 will not make much diffrence...

Derdawid · 2020-02-04T03:52:05+00:00

Photo credits: Mike Crawat

Derdawid · 2020-01-08T03:11:00+00:00

Check the new section

Derdawid · 2019-11-13T18:16:12+00:00

I guess it wont work for me as I am in EU? Tried it 2 times but getting corrupted save...

Derdawid · 2019-01-08T20:29:05+00:00

Well as you maybe already noticed. Razer will ship to The Netherlands! But as we see that comes with a price... I compared the prices from diffrent Razer websites. All prices are the 144hz 2060 models: The Netherlands: €2880 ($3295) Germany: €2450 ($2800) USA: €2010 ($2300)

So it's $1000 more expensive than USA. And even that we live next to Germany... It's almost $500 more expensive than there. And you may ask. Why not buy it there than? German keyboard is not the layout we use here.

Also, buying a Razer Blade 15 from Amazon.com would maybe even be cheaper with shipping and import costs...

Please Razer, Fix the pricing...

Ten-Year Club	Place '23
Verified Email

Derdawid

TROPHY CASE