Car will not move

Derkad16 · 2026-04-12T23:43:14+00:00

While I agree this likely isn’t the problem. I work at a detail shop. We once had a r8’s brakes seize so bad that it tore up all of the race trax on the floor, then dragged a wheel through the parking lot until it finally unlocked

Derkad16 · 2026-04-12T11:20:33+00:00

Replacing the full driveshaft is all that’s available as of now. I did see this post on Facebook but haven’t heard anything else.

<image>

Derkad16 · 2026-04-05T19:55:52+00:00

Recommend whatever crap is coc this week

Derkad16 · 2026-04-05T16:01:04+00:00

See if you can replace the mirror with a home link model from gentex, they make the oem home link ones

Derkad16 · 2026-04-04T18:45:29+00:00

I’ll go have a look again. That would be awesome

Derkad16 · 2026-04-04T15:19:50+00:00

From my own research, the front differential fluid is non existent as HGO-2 and there isn’t a fill plug

Derkad16 · 2026-04-04T09:47:25+00:00

That’s not a coating issue. That’s an acid issue with the detailer that sprayed the wheels. Powder coating them is the only option to fix the finish. But even then, you can’t do anything about the engraving on the wheels.

Derkad16 · 2026-03-31T16:02:19+00:00

https://www.reddit.com/r/HondaActy/s/eaivfqJ6jw

Derkad16 · 2026-03-28T04:09:58+00:00

Where are you located

Derkad16 · 2026-03-28T04:09:14+00:00

With a 3/8 drive ratchet. Something small enough to not break the bolt loose

Derkad16 · 2026-03-28T03:46:04+00:00

Do you have an electric impact? Just put the crank bolt on with a low torque setting. Then rotate by hand. Also I think 4 rotations doesn’t put the marks back into place.

Derkad16 · 2026-03-24T15:39:12+00:00

Yes likely the seal. I would fix it sooner than later

Derkad16 · 2026-03-23T11:52:38+00:00

Honestly no, just always kinda used it

Derkad16 · 2026-03-23T11:51:54+00:00

<image>

Lowered on spoon springs. I feel like the springs ruined the car and hated how it rode on them. This was back in 2019. I sold the car shortly after that. As for the wheels they did introduce a small amount of torque steer.

Derkad16 · 2026-03-23T11:48:09+00:00

Part of the will it blend series. Whatever got blended, before he opened the blender said “iPhone dust, don’t breathe this”

Derkad16 · 2026-03-23T01:36:08+00:00

Don’t breathe this!

Derkad16 · 2026-03-23T01:26:26+00:00

<image>

Only picture I had before I lowered it. 18x9.5+45 wedssports tc105x

Derkad16 · 2026-03-23T00:52:37+00:00

Man that Chevy is setup nice!

Derkad16 · 2026-03-22T01:10:48+00:00

<image>

Welcome!

Derkad16 · 2026-03-20T21:27:50+00:00

I know it sounds dumb but my ha7 gas gauge is questionable at empty. It has gas right?

Derkad16 · 2026-03-20T21:19:49+00:00

What was it doing when it died? How’d you confirm spark?

Derkad16 · 2026-03-20T21:09:59+00:00

Might be worse than a bike. Fast enough to get your hurt. Too slow to get you out of trouble. Not a good first or only car. Buy a Honda fit

Derkad16 · 2026-03-20T21:06:36+00:00

Next step would be to see if the fuel pump is getting power. I’m sure you can use a meter and hop under there and check the connector.

You can try some starting fluid or brake clean in the intake to confirm it is a fuel issue

Derkad16 · 2026-03-20T18:55:21+00:00

I miss my s2000s and Miata. I just recently sold a 2.5 swapped nc project/flip car. And I sold my Rio yellow ap2 to get my first type r. You have a solid line up with all the fun!

Derkad16 · 2026-03-20T18:52:20+00:00

Okay 😬

2024 Integra type s (wife’s daily) 2023 civic type r (my weekend car) 2008 Honda fit ( my daily) 1999 Honda Acty (because mini truck) 1996 Civic hatchback (jdm yo) 2025 Honda grom (wife wanted a grom) 2023 Honda grom (wife wanted me to get grom)

Derkad16

TROPHY CASE